GI Zinc Coated Iron Metal Sheet Roll For Car Automobile

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional gi zinc coated iron metal sheet roll for car automobile manufacturers and suppliers in China. Welcome to wholesale customized gi zinc coated iron metal sheet roll for car automobile at competitive price from our factory. Good service and quality products are available.

Cold-rolled steel is steel produced by cold rolling. Cold rolling is a steel plate obtained by further rolling the No. 1 steel plate to a target thickness at room temperature. Compared with hot-rolled steel sheets, cold-rolled steel sheets have more accurate thickness, smooth and beautiful surface, and also have various superior  mechanical properties, especially in terms of processing performance. Because cold-rolled raw coils are relatively brittle and hard, they are not suitable for processing, so usually cold-rolled steel sheets are required to be annealed, pickled and surface-leveled before being delivered to customers. The maximum thickness of cold rolling is below 0.1--8.0MM. For example, the thickness of cold-rolled steel sheets in most factories is below 4.5MM; the minimum thickness and width are determined according to the equipment capacity of each factory and market demand.
The difference between cold-rolled steel and hot-rolled steel is not in the smelting process, but in the rolling temperature, or the termination temperature of rolling. The finish rolling temperature lower than the recrystallization temperature of the steel becomes cold rolled steel. Hot-rolled steel is easy to roll and has high rolling efficiency, but the steel is oxidized under hot-rolled conditions, and the surface of the product is black and gray. Cold-rolled steel requires high mill power and low rolling efficiency, and intermediate annealing is required to eliminate work hardening during the rolling process, so the cost is also high, but cold-rolled steel has a bright surface and good quality, and can be directly used for processing Finished products, so cold-rolled steel sheets are widely used.

Amidst the vast land of China and the majestic Taihang Mountains lies Anyang, Henan Province, located on the eastern foothills of the Taihang mountain range. It is one of the eight ancient capitals of China and home to an outstanding steel supply chain enterprise – GNEE GROUP.

GNEE GROUP, established in 2008 with a registered capital of 5 million yuan, has grown into a comprehensive steel supply chain enterprise after more than a decade of hard work and perseverance. It has five subsidiaries located in different countries and regions, including Anyang, Tianjin, Hong Kong, Zhengzhou, and Singapore, and its influence has reached out around the world.

Q: How to buy it? What about the delivery?
A: Please contact me by email or online, let me know your situation, I will give you professional solution. We have shipping agent can choosing the cheapest and fastest delivery. FOB, CIF, C&F or EXW are no problem for us.

Q: Could you offer some spare parts?
A: Yes, no problem.

Q: What about the maintenance?
A: All the goods past the test, maintenance is very easy.

Q: What is the standard of package?
A: Export standard package or special package according to customer's requirement.

Q: Why should I choose GNEE?
A: After comparing the quality, delivery, and price of the same products, you will find out the answer.

Hot Tags: gi zinc coated iron metal sheet roll for car automobile, China gi zinc coated iron metal sheet roll for car automobile manufacturers, factory, Cold Rolled Coil