-
Jul 01, 2026Bending Process of Wear Resistant Steel PlateCan wear-resistant steel plates be bent? Wear-resistant steel plates can be bent, yet the inner bending radius and bending angle must be strictly controlled. During cold bending, t -
Jun 30, 2026NM450 wear plate for dump truck bodyDump truck bodies transport highly abrasive materials every day, including iron ore, granite, limestone, gravel, and coal. Continuous abrasion and impact gradually wear the body, l -
Jun 29, 2026NM450 vs NM450Tuf: Key Performance DifferencesWhat Are NM450 and NM450Tuf? 01. What is NM450 Steel? NM450 steel is one kind of Chinese wear/abrasion resistant steel plates. It was hot rolled and then the plates were heat-treat -
Jun 29, 2026NM450 Wear-Resistant Steel Plate 3 × 2000 × 6000 mm Ultra-Thin, Maximum-Width...NM450 3×2000×6000 — ultra-thin, maximum-width wear-resistant steel for construction machinery, mining equipment & agricultural attachments. 450 HBW hardness, tensile strength of no -
Jun 26, 2026How Long Does NM400 Wear Plate Last?What Is NM400 Wear Resistant Steel Plate? NM400 is a high-strength wear-resistant steel plate. Its designation derives from the initials of the Chinese pinyin for "wear resist -
Jun 25, 2026What is A633 Grade D structural steel plate?ASTM A633 Grade D high-strength low-alloy steel plate – normalized fine-grain structure, -45°C impact toughness, excellent weldability. Ideal for bridges, offshore & heavy machiner -
Jun 25, 2026NM450HiTemp VS NM450:Comparison of Tensile Strength at Different TemperaturesAs the name suggests, it is a wear-resistant steel plate capable of withstanding high temperatures. As a premium grade wear plate, it features excellent impact toughness. "NM& -
Jun 24, 2026Why ASTM A612 Plate Is Widely Used in Pressure Vessels?ASTM A612 is a carbon-manganese-silicon steel plate intended primarily for welded pressure vessels and storage tanks requiring improved strength compared to conventional carbon ste -
Jun 24, 2026GB/T 714-2025 Structural steel for bridgeThis Document specifies the designation method, ordering details, manufacturing process, technical requirements, test methods, inspection rules, packaging, marking, and quality c -
Jun 23, 2026A612 vs P355GH: Which pressure vessel plate to choose?In the manufacturing of pressure vessels, boilers, heat exchangers and petrochemical equipment, material selection directly determines equipment safety, service life and manufactur -
Jun 22, 2026ASTM A612 Steel Plate for the Gas IndustryASTM A612 refers to killed carbon-manganese-silicon steel specified under ASTM International standards, engineered exclusively for welded pressure vessels operating at moderate and -
Jun 18, 2026Why Use ASTM A612 (PVQ) Plate for Pressure Vessels Build?ASTM A612 is a fully killed carbon-manganese-silicon (C-Mn-Si) steel plate engineered exclusively for welded pressure vessels operating under medium and low-temperature service con




