Q355NH Low Alloy High Strength Weathering Steel
Want to know more about our products? Please contact us by email or phone.
Gnee Steel (Tianjin) Co., Ltd. is one of the most professional q355nh low alloy high strength weathering steel manufacturers and suppliers in China. Welcome to wholesale customized q355nh low alloy high strength weathering steel at competitive price from our factory. Good service and quality products are available.
Products Description
Q355NH Low Alloy High Strength Weathering Steel is a premium structural material compliant with GB/T 4171-2008, designed to deliver optimal strength, corrosion resistance, and formability for demanding outdoor applications. Combining a low alloy composition with high tensile properties, this steel minimizes material thickness while resisting atmospheric degradation, making it a cost-effective solution for long-term exposed structures.
Chemical Composition (GB/T 4171-2008, Mass Fraction, %)
| Element | C | Si | Mn | P | S | Cu | Cr | Ni |
|---|---|---|---|---|---|---|---|---|
| Range | ≤0.16 | ≤0.50 | 0.50-1.50 | ≤0.030 | ≤0.030 | 0.25-0.55 | 0.30-1.25 |
≤0.65 |
Mechanical Properties (Thickness ≤16mm, GB/T 4171-2008)
| Property | Value |
|---|---|
| Yield Strength (ReL) | ≥355 MPa |
| Tensile Strength (Rm) | 490–630 MPa |
| Elongation (A) | ≥20% |
| Charpy Impact Energy (20℃, V-Notch) | ≥47 J |
Corrosion Resistance & Environmental Adaptability
Q355NH excels in moderate-humidity environments (50–80% RH) where salt and acid exposure are minimal, such as inland industrial zones, suburban areas, and temperate climates. The self-healing oxide layer eliminates the need for frequent protective coatings, reducing lifecycle maintenance costs by up to 60% compared to conventional carbon steel. While not suitable for high-salt coastal or strongly acidic (pH <4) environments, it performs reliably in settings with occasional moisture and pollution, such as near highways (exposed to de-icing salts) or industrial complexes (exposed to sulfur dioxide).
Fabrication & Weldability
The steel supports standard cold and hot working processes, including bending, punching, and shearing, with formability comparable to low-carbon steels. For welding, use weathering steel-specific electrodes (e.g., E5015-NH or E5515-NH) to ensure weld joints maintain equivalent corrosion resistance to the base metal. Post-weld treatments, such as removing slag and debris, are critical to prevent localized corrosion at connection points. Thin sections (≤16mm) typically require no preheating, while thicker components may benefit from moderate preheating (75–125°C) to enhance joint integrity.
Key Applications
Transportation Infrastructure: Ideal for railway carriages, truck frames, and container skeletons, where weight reduction and corrosion resistance improve fuel efficiency and operational lifespan.
Industrial Machinery: Used in agricultural equipment, construction machinery, and mining structures, withstanding abrasive conditions and atmospheric exposure.
Building Structures: Suited for steel-framed buildings, outdoor signage, and storage tanks, offering a balance of strength and weathered aesthetics without excessive maintenance.
Renewable Energy: Applied in wind turbine support structures and solar panel mounts, resisting UV degradation and temperature fluctuations in remote installations.
Advantages of Low Alloy Design
Lightweight Strength: High strength-to-weight ratio allows for thinner, lighter sections, reducing material usage by 10–15% compared to conventional structural steels.
Sustainable Performance: Minimal coating requirements align with green building practices, reducing VOC emissions and waste while enabling 100% recyclability at end-of-life.
Reliable Compliance: Strict adherence to GB/T 4171-2008 ensures consistent quality, with mill certificates verifying chemical composition, mechanical properties, and surface integrity for traceable performance in critical applications.
Standards & Quality Assurance
Q355NH meets the rigorous requirements of GB/T 4171-2008 for atmospheric corrosion-resistant structural steels, with additional compatibility with international standards like ASTM A588 Grade A (USA) and EN 10025-5 (EU). Each batch undergoes comprehensive testing, including tensile, impact, and corrosion resistance evaluations, to guarantee compliance and reliability for global projects.
By integrating low alloy efficiency with high-strength durability, Q355NH Low Alloy High Strength Weathering Steel sets a standard for cost-effective, sustainable solutions in exposed structural applications, delivering long-term performance with minimal environmental impact.
Company Profile


Customer Visiting


Hot Tags: q355nh low alloy high strength weathering steel, China q355nh low alloy high strength weathering steel manufacturers, factory, Q500NH Corten Steel Plate, Q415NH Corten Steel Plate, Q450NQR1 Corten Steel Plate, GB Corten Steel Plate, Q550NH Corten Steel Plate, Q355NH Corten Steel Plate
You Might Also Like
Send Inquiry












