SA387 Grade 22 Class 1 SA387 Grade 22 Class 2 P460QL1 Pressure Vessel Plate
video

SA387 Grade 22 Class 1 SA387 Grade 22 Class 2 P460QL1 Pressure Vessel Plate

SA387 Grade 22 Class 1 SA387 Grade 22 Class 2 P460QL1 Pressure Vessel Plate Supplier

Want to know more about our products? Please contact us by email or phone.

Send E-mail: info@gneesteels.com
Product Introduction

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional sa387 grade 22 class 1 sa387 grade 22 class 2 p460ql1 pressure vessel plate manufacturers and suppliers in China. Welcome to wholesale customized sa387 grade 22 class 1 sa387 grade 22 class 2 p460ql1 pressure vessel plate at competitive price from our factory. Good service and quality products are available.

 

 

1. Chrome Molybdenum Alloy Steel Plates (ASTM A387 Grade 22 Series)
Classification Basis: Differences in Heat Treatment Process and Mechanical Properties

Grade Heat Treatment Process Mechanical Properties Core Application Scenarios
SA387 Gr22 Cl.1 Normalizing Yield ≥310 MPa, Tensile ≥515 MPa High-temperature reactors (≤550°C)
SA387 Gr22 Cl.2 Quenching + Tempering (Q+T) Yield ≥450 MPa, Tensile ≥620 MPa High-pressure hydrogenation reactors (hydrogen embrittlement resistant)

Key Differences:

Cl.1 vs Cl.2:

Cl.2 has a 20% increase in tensile strength after quenching and tempering, but requires strict control of welding preheat temperature (200-250°C vs Cl.1's 150-200°C).

Cl.2 has higher impact toughness (≥54J @ -30°C vs Cl.1's ≥34J @ 0°C).

2. High Strength Quenched & Tempered Steel Plates (EN 10025-6 P460QL1)
Material Characteristics:

Standard: EN 10025-6

Marking Explanation:

P460: Minimum yield strength of 460 MPa

QL1: Quenched & Tempered, Grade 1 (High Purity)

Key Parameters:

Tensile Strength: 570-720 MPa

Impact Toughness: ≥40J @ -40°C

Carbon Equivalent (CET): ≤0.43 (Optimized weldability)

Typical Applications:

LNG storage tanks (-162°C low-temperature toughness)

Offshore platform high-pressure pipe assemblies

3. International Standard Comparison (ASTM vs EN)

Parameter SA387 Gr22 Cl.2 P460QL1 GB 713 14Cr1MoR
Yield Strength (MPa) ≥450 ≥460 ≥310
Temperature Range -30°C ~ +595°C -60°C ~ +200°C -20°C ~ +560°C
Hydrogen Partial Pressure Limit ≤4.5 MPa (NACE standard) Not applicable ≤3.8 MPa
Inspection Requirement ASTM A578 B Grade EN 10160 S3 Grade JB/T 4730 B Grade

4. Material Selection Guide

For High-Temperature, High-Pressure Hydrogen Environments (e.g., Hydrocracking Reactors):

Choose SA387 Gr22 Cl.2 (hydrogen cracking resistant, must be paired with NACE MR0175 certification)

Avoid P460QL1 (no resistance to high-temperature hydrogen corrosion)

For Ultra-Low Temperature Storage (e.g., LNG Tanks):

Choose P460QL1 (low-temperature toughness at -60°C, Z35 resistant to lamellar tearing)

Optional SA387 Gr22 Cl.1 (only above -30°C)

For Medium-Temperature Containers Requiring High Welding Efficiency:

Choose P460QL1 (low CET, preheat temperature can be reduced to 80°C)

SA387 Gr22 Cl.2 requires strict preheating (200°C)

5. Purchasing Technical Requirements

SA387 Gr22 Must-Check Items:

Ultrasonic Testing (UT): ASTM A578 B Grade (mandatory for Cl.2)

Grain Size Inspection: ASTM E112 Grade 6-8

High-Temperature Tensile Test (Yield ≥200 MPa at 500°C)

P460QL1 Additional Requirements:

Sulfide Stress Cracking (SSC) Test: NACE TM0177

Z-Properties: Z25/Z35 (EN 10164)

Welding Procedure Qualification: EN ISO 15614-1

6. Processing and Welding Standards

Process SA387 Gr22 Cl.2 P460QL1
Cutting Preheat Temperature ≥150°C (t≥25mm) ≥80°C (t≥30mm)
Recommended Welding Filler AWS E8018-B2 (matches Cr-Mo composition) EN ISO 14341-A G 46 6 M21
Post-Weld Heat Treatment 675-705°C ×2h/25mm 580-620°C ×1h/25mm

7. Economic Comparison (2023 Baseline Prices)

Grade Price Index (SA387 Gr22 Cl.1 = 1.0) Best Value Recommended Scenarios
SA387 Gr22 Cl.1 1.0 Regular high-temperature reactors (non-hydrogen)
SA387 Gr22 Cl.2 1.8 Petrochemical hydrogenation units (high hydrogen partial pressure)
P460QL1 1.5 LNG storage tanks/Polar Equipment

8. Failure Case Analysis

Case 1: Hydrogenation Reactor in Refinery (SA387 Gr22 Cl.1 not heat-treated)

Issue: Hydrogen-induced cracking in weld heat-affected zone (did not follow mandatory Q+T for Cl.2)

Solution: Upgrade to Cl.2 and ensure strict post-weld heat treatment (PWHT)

Case 2: Arctic LNG Tank (Misuse of SA387 Gr22 Cl.2)

Issue: Brittle fracture at -50°C low temperature

Solution: Replace with P460QL1 and increase Z35 properties

Boiler Steel Plate Product Iamge

 

China boiler steel plate Suppliers​
Pressure Vessel Steel Plate​
China pressure vessel steel Distributors​
GNEE Group Team Photo
 

China pressure vessel steel Suppliers

GNEE Group Customer Visit

 

China boiler steel plate Distributors​
China steel boiler plate Suppliers​
China Boiler Plate Steel Manufacturers​

 

GNEE Group Steel Exhibitions

 

China pressure vessel plate Suppliers​
China pressure vessel steel plate Distributors​
China pressure vessel quality steel Suppliers​

We guarantee the quality and quantity of P460QL1 Pressure Vessel Plate Material. If you would like more information, please contact us!

 

Hot Tags: SA387 Grade 22 Class 1 SA387 Grade 22 Class 2 P460QL1 Pressure Vessel Plate, China SA387 Grade 22 Class 1 SA387 Grade 22 Class 2 P460QL1 Pressure Vessel Plate manufacturers, factory, P460QL1 P460QL2 Steel Plate For Low Temperature Tank, PVQ Steel Plate, P355NL1 Steel Plate P460NL1 For Low Temperature Storage Tanks, P275NL1 P275NL2 P355NL1 P355NL2 For Oil Industry, Quenched And Tempered Steel Plate P355QL1 P355QL2, P275NL2 Alloy Steel P420NL1 For Chemical Industry

Send Inquiry

whatsapp

phone

Email

Inquiry