20# Mild Steel Round Bar
video

20# Mild Steel Round Bar

20# Mild Steel Round Bar is a simple way of writing 20 steel, which is a type of steel. Commonly used to manufacture seamless steel pipes, molds, high-quality carbon steel plates, channel steel, I-beam and other steel products.
Send Inquiry
Chat Now

Want to know more about our products? Please contact us by email or phone.

Send E-mail: info@gneesteels.com
Product Introduction

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional 20# mild steel round bar manufacturers and suppliers in China. Welcome to wholesale customized 20# mild steel round bar at competitive price from our factory. Good service and quality products are available.

 

20# Steel Round Bar Products Description

20# Mild Steel Round Bar is a simple way of writing 20 steel, which is a type of steel. 20# Special Alloy Round Bar refers to a carbon content of 0.2% and is a low carbon steel. This steel bar is high-quality low-carbon carbon steel, cold extruded, carburized and hardened steel. This steel bar has low strength but good toughness, plasticity and weldability. The tensile strength is 253-500MPa, and the elongation is ≥24%. Its carbon content is generally less than 0.25%; steel contains carbon (C) elements and a certain amount of silicon (Si) (generally not more than 0.40%) for deoxidation, manganese (Mn) (generally not more than 0.80%), higher can To 1.20%), it does not contain other alloying elements (except residual elements). The properties of 20 steel are basically similar to those of 15 steel, but the strength is slightly higher.

 

Chemical Composition Of 20# Steel Round Bar
С Si Mn P S Cr Cu Ni
0.17-0.24 0.17-0.37 0.35-0.65 ≤0.035 ≤0.040 ≤0.25 ≤0.30 ≤0.30

 

Mechanical Properties Of 20# Round Bar
Minimum yield strength, N/mm2, not less Ultimate tensile strength, N/mm2, not less Minimum elongation ratio, %, not less Contraction ratio, %, not less
245 410 25 55

 

Heat Treatment Temperature Of 20# Alloy Steel Round Bar

1) The normalized temperature is 920-950 ℃, and the furnace is cooled by air. Hardness 131-156HBs.
2) The standard temperature for softening treatment of cold pressed blanks is 700-720 ℃, the holding time is 8-15h, and then the temperature is reduced to ≤ 550-600 ℃ with the furnace at the cooling rate of 50-100 ℃/h, and the furnace is discharged for air cooling.
Hardness before treatment ≤ 143HBs, hardness after softening ≤ 131HBs.
3) The quenching standard temperature is 910 ℃± 10 ℃, and 10% NaCl brine is used for cooling.
4) Measured yield strength FY = 245MPa, elastic modulus E = 206Gpa, Poisson's ratio ν=0.3.
5) The shear strength is 275-392Mpa, the tensile strength is 253-500Mpa, the yield strength is 275Mpa, and the elongation is 25%.
6) The annealing temperature is only 600-650 ℃, and the holding time is 1-2h.

 

20# Round Metal Bar Product Image

China high carbon steel Manufacturers

 

GNEE Group Team Photo

China Carbon Steel Sheet DistributorsChina Special Steels Manufacturers

 

 

GNEE Group Customers Visit

China Specialty Metals Distributors

We have enough 20# Mild Steel Round Barstock, we can also customize according to your needs.

Hot Tags: 20# mild steel round bar, China 20# mild steel round bar manufacturers, factory, Hollow Bar, Hollow Round Bar, Solid Bar, Round Bar, Steel Round Hollow Bar, Mild Steel Round Bar

Send Inquiry

whatsapp

phone

Email

Inquiry