Grade EH32 High strength hull structural steel
video

Grade EH32 High strength hull structural steel

RINA Grade EH32 Quality Steel Plates is a kind of Marine structural steel plate, usually used to manufacture various structural components of ships and offshore engineering. It has good weldability, plasticity and impact toughness, suitable for use under low temperature conditions.

Want to know more about our products? Please contact us by email or phone.

Send E-mail: info@gneesteels.com
Product Introduction

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional grade eh32 high strength hull structural steel manufacturers and suppliers in China. Welcome to wholesale customized grade eh32 high strength hull structural steel at competitive price from our factory. Good service and quality products are available.

 

EH32 High Strength Hull Structure Steel Product Overview
Grade: EH32 (China CCS standard, compliant with international classification society rules)
Material Category: High-strength hull structural steel (hot-mechanical rolled TMCP or normalized condition)

Key Features:

High Strength & Toughness: Yield strength ≥315 MPa, -40℃ impact energy ≥46J (Charpy V-notch).

Weldability: Carbon equivalent (CEV) ≤0.38%, cold cracking susceptibility coefficient (Pcm) ≤0.21%.

Corrosion Resistance: Passes classification society seawater corrosion tests (optional Cu/Cr additions).

Z-Direction Performance: Available in Z15/Z25 grades for anti-lamellar tearing (specify requirements).

Applications: Bulk carriers, container ship side shells, offshore platforms, polar vessel ice zone structures.


EH32 Technical Parameters

Parameter Value Test Standard
Chemical Composition (%): C≤0.18, Mn 0.90-1.60, Si≤0.50, CCS specifications
  P≤0.025, S≤0.015  
Yield Strength (ReH) ≥315 MPa ISO 6892-1
Tensile Strength (Rm) 440-590 MPa ISO 6892-1
Elongation (A50) ≥22% ISO 6892-1
Impact Toughness (-40℃) ≥46 J (transverse specimen) ISO 148-1
Carbon Equivalent (CEV) ≤0.38% (IIW formula) EN 1011-1
Delivery Condition TMCP/TMCP+tempering (recommended), normalized CCS/ABS/LR certification

EH32 Core Advantages

Polar Adaptability: Optional -60℃ low-temperature impact testing for polar vessels (PC6/PC7 ice classes).

Efficient Welding: Compatible with E36/E40-grade welding materials; no preheating required (plate thickness ≤25mm).

Lightweight Design: 15%-20% weight reduction vs. Grade A ship plates, lowering fuel consumption.

Full Certification: Batch-specific classification society 3.1/3.2 certificates (with UT inspection reports).


EH32 Typical Applications
Shipbuilding:

Large tanker deck longitudinals (12-40mm thickness).

LNG ship cargo tank secondary barrier support structures.

Offshore Engineering:

Jack-up rig legs (Z25-grade thick plates).

Jacket platform node reinforcement plates.

Special Vessels:

Bow ice belt zone of icebreakers (Ice Class 1A).

Sub-armor structures for military vessels.


EH32 Compliance & Certifications

International Classification Society Approvals: CCS (China), ABS (USA), LR (UK), DNV (Norway), GL (Germany).

Regulatory Compliance: Meets IMO International Common Structural Rules for Bulk Carriers and Oil Tankers (CSR).

Special Certifications: Corrosion-resistant ship plate (CCS DH32), high heat-input welding plate (EH36-W).


EH32 Processing & Welding Guidelines
Cutting Methods:

Plasma Cutting: Suitable for plates ≤50mm (control cutting speed).

Laser Cutting: High-precision edges (tolerance ±0.5mm).

Welding Procedures:

Submerged Arc Welding (SAW): Use H08MnA wire + SJ101 flux (heat input ≤50 kJ/cm).

CO₂ Gas Shielded Welding: Gas purity ≥99.95% (Ar + 20% CO₂ mixture preferred).

Post-Weld Treatment: Stress relief at 600-650℃ (mandatory for plates ≥50mm).

Cold Working Limits:

Cold bending radius ≥3× plate thickness (avoid surface cracks).

Flame straightening prohibited; use mechanical correction.
 

EH32 Application Cases

300,000-ton VLCC tanker deck project

EH32 TMCP steel plate (plate thickness 28mm) is used, and the welded joint passes the CTOD test (critical crack opening displacement ≥0.25mm), meeting the design requirement of 20-year fatigue life.

EH32 Ordering and Customization Service

General Specifications:
Thickness: 6-100mm (maximum thickness of Z-axis steel 150mm);
Width: 1800-4500mm (can roll ultra-wide plates);
Length: 6000-24000mm (cut to length).

Value-added Services:
Pre-coating shop primer (inorganic zinc silicate, salt spray resistance ≥720h);
Provide welding process qualification (WPS/PQR) package;
Third-party NDT testing (UT/MT/RT).

EH32
For precise material selection, please provide the following information:
Target classification society specifications (such as CCS/ABS/DNV);
Structural position and plate thickness (whether Z-direction performance is required);
Special environmental requirements (low temperature, corrosion, fatigue load).

EH32 SHIP PLATE SUPPLIER

FAQ:

Q: What are the main differences between EH36 and EH32?
A: The yield strength of EH36 is ≥355MPa, which is 10% higher than that of EH32 and is suitable for heavy-duty structures such as deep-water operating platforms.
Q: How to quickly detect the quality of steel plates?
A: The combined detection method of portable spectrometer (composition verification) + Leeb hardness tester (strength verification) can complete the initial inspection in 10 minutes.

RINA EH32 Steel Plate Product Photos

EH32 SHIP PLATE

Our Team And Exhibition Photo

China marine sheet manufacturer

China ship building steel plate Distributors

 

Customers Photos

China shipbuilding plates Manufacturers

We have professional staff to provide detailed responses to your orders. If you have any questions about Grade EH32 Quality Steel Plates, please contact me.

Hot Tags: Grade EH32 High strength hull structural steel, China Grade EH32 High strength hull structural steel manufacturers, factory, Steel Sheet Metal, steels for shipbuilding, steel sheet metals, Weldable Structural Steel Plate, Naval Steel, steel plates for shipbuilding

Send Inquiry

whatsapp

phone

Email

Inquiry