Cold Rolled Non-Oriented Silicon Steel (CRNGO)
video

Cold Rolled Non-Oriented Silicon Steel (CRNGO)

Electrical steel is a ferromagnetic material made up of iron that contains varying amounts of silicon (Si) that range from 1% to 6.5%. The development of electrical steels was brought on by electrical devices requiring steels that can decrease the dissipation of heat, an issue that results in energy wastage.

Want to know more about our products? Please contact us by email or phone.

Send E-mail: info@gneesteels.com
Product Introduction

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional cold rolled non-oriented silicon steel (crngo) manufacturers and suppliers in China. Welcome to wholesale customized cold rolled non-oriented silicon steel (crngo) at competitive price from our factory. Good service and quality products are available.

 

GNEE Steel Non oriented electrical steel

In general, the iron loss of electrical steels can be reduced by adding Silicon (Si) and Aluminum (Al) in the melting-process(1), as these elements increase the electric resistivity and reduce the eddy losses caused by eddy current. Additionally, reducing the thickness of electrical steel also usually contributes to lower eddy losses for high-frequency motors applications. However, the two methods mentioned above will induce some problems, such as the reduction of iron fraction and an increase in the harmful microstructure and texture evolution caused by rolling which causes magnetic flux density to drop seriously.Therefore, there is a need to find ways that are suitable for both iron loss reduction and raising magnetic induction.

Cold rolled non oriented electrical steel

Non grain oriented silicon steel

Product Name Cold Rolled Non-Oriented Silicon steel (CRNGO)
Grade M300,M310,M350,M400.M470,M530,M600,M700,M800,M1000,M1300
Thickness 0.35mm-0.50mm
Width 10mm-1250mm
Length Coil or As required
Surface Treatment Coated
Technique Cold Rolled
Place of Origin China
Application electro motor,industry motor, generator,pump,electric motor,compressor engine,fan etc

The addition of silicon in iron greatly improves the physical properties of electrical steels. Electrical steels have the following desirable properties for supporting the generation, distribution and consumption of electricity:

  • High permeability - increased capacity to support magnetic fields
  • Low magnetostriction - low tendency to expand or contract in magnetic fields
  • High electrical resistivity - lessens the core loss by reducing the eddy current component
  • Decreased hysteresis loss - low hysteresis loss means less wasted energy in the form of heat from alternating magnetising force
Non Oriented Silicon Steel Used For

Silicon steels, with their advantageous magnetic performance, are vital in many electrical systems. Below are some of the applications where Silicon steel cores are used:

Rotating machines:

  • Electrical vehicle driving motors
  • Hermetic motors
  • Alternating current (AC) motors
  • Intermittent service motors

Static machines:

  • Power and distribution transformers
  • Reactors and magnetic amplifiers
  • Welding transformers
  • Audio transformers
  • Current transformers
  • Magnetic switches and relays
  • Electrical ballast

Non grain oriented electrical steel package

Cold rolled non grain oriented steel

Hot Tags: cold rolled non-oriented silicon steel (crngo), China cold rolled non-oriented silicon steel (crngo) manufacturers, factory, CRNO Non Oriented Electrical Steel

Send Inquiry

whatsapp

phone

Email

Inquiry