Non-Oriented Electrical Steel Of Cold Rolled Silicon Steel Coil
video

Non-Oriented Electrical Steel Of Cold Rolled Silicon Steel Coil

Non-oriented silicon steel: ferro-silicon alloy with very low carbon content. In the deformed and annealed steel sheet, its grains are distributed randomly. The silicon content of the alloy is 1.5% to 3.0%, or the sum of the silicon and aluminum content is 1.8% to 4.0%. The products are usually cold-rolled plates or strips, which are mainly used to manufacture motors and generators.

Want to know more about our products? Please contact us by email or phone.

Send E-mail: info@gneesteels.com
Product Introduction

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional non-oriented electrical steel of cold rolled silicon steel coil manufacturers and suppliers in China. Welcome to wholesale customized non-oriented electrical steel of cold rolled silicon steel coil at competitive price from our factory. Good service and quality products are available.

 

GNEE Steel Non oriented silicon steel

Non-oriented electrical steel is an extremely important Fe-Si soft magnetic alloy with many factors affecting its magnetic properties, among which alloy composition, grain size, and texture component content have the greatest influence . As the grain size of the annealed sheet increases, the magnetic domain size would also increase and hysteresis loss (Ph) decrease, but both eddy current loss (Pe) and the abnormal eddy loss (Pa) considering the magnetic domain structure would increase . Meanwhile, grain size of the optimum magnetic properties would obviously be correlated with composition and cleanliness of the steel.

product-731-287

No Oriented Electrical Steel

Application scenarios

The main use of brand

Large mechanical and electrical

Water, fire, nuclear power units, more than 30-50 w290

Wind turbines: 30-35 w360 above

Household appliances

Efficient frequency conversion air conditioning compressor: 30-50 w360 above

Efficient frequency conversion refrigerator compressor: 30-50 w360 above

Small and medium-sized mechanical and electrical

Y1 / Y2, Y3 series and derived series products: low grades

High efficiency, super efficient: 30-35 w470

New energy vehicles

Drive motor: 20-35 w1200 - more than 1900

New energy automobile micromotor: 20-35 w360

Our GNEE Advantage

Quality is guaranteed. First, the raw materials come from many well-known domestic and foreign enterprises, such as Baosteel,WISCO, Nippon Steel. We have the most excellent materials.Secondly, our company has a perfect quality assurance system, which guarantees that you can get thebest products from purchase to delivery.
Price concessions. Our company's product price is in the middle level of the industry, and is famous for its high cost performance. There is still a lot of room for price. We look forward to your demand. We will give you a mostsuitable quotation.
Delivery on time and stable cooperation. GNEESTEEL has had MORE years of trade experience since its establishment. Good service is a constant requirement and has always done so. You can rest assured of our promptness of delivery and the flexibility of expanding supply.
Service is trustworthy. We have been a high-quality supplier, has been committed to foreign trade. We sincerely and warmly welcome you to visit and give advice to improve our shortcomings, learn new technologies, improve product performance, and mutual benefit.

Grain Non oriented electrical steel package

Grain Non oriented silicon steel

Hot Tags: non-oriented electrical steel of cold rolled silicon steel coil, China non-oriented electrical steel of cold rolled silicon steel coil manufacturers, factory, CRNO Non Oriented Electrical Steel

Send Inquiry

whatsapp

phone

Email

Inquiry