76 MVA Step Down 110 KV To 35 KV Three Phase Power Transformer
Want to know more about our products? Please contact us by email or phone.
GNEE Steel step down power transformer
It's a step down transformer 110 kV to 35 kV, the primary voltage is 110 kV, the secondary voltage is 35 kV, the transformer is equipped with on load tap changer, the tapping range is ±8*1.25% at primary side, the cooling is ONAF. The vector group of this transformer is YNd11,which neutral bushing is in primary side. Current transformer with protection for neutral bushing.The material for HV and neutral bushing is OIP. our 76 MVA power transformer was designed with advanced technology and adopts high quality material and components which result in reliable quality and long operation time.
We ensure that each one of our delivered units has undergone rigorous full acceptance testing. We provide one-package service from consulting, quoting, manufacturing, installation, commissioning, training to after sale services, our products are now operating in more than 50 counties in the world. We aim to be your most reliable supplier as well as your best partner in business!
high power transformer

Technical Data Sheet
76 MVA oil type power transformer specifications and data sheet
|
Model |
SZ11-76 MVA-110/35 kV |
|
Type |
Oil Immersed Power Transformer |
|
Standard |
IEC60076 |
|
Rated Power |
76 MVA |
|
Frequency |
50 Hz |
|
Phase |
Three |
|
Cooling Type |
ONAF |
|
Primary Voltage |
110 kV |
|
Secondary Voltage |
35 kV |
|
Winding Material |
Copper |
|
Vector Group |
YNd11 |
|
Impedance |
12 |
|
Tap Changer |
OLTC |
|
Tapping Range |
±8*1.25% |
|
No Load Loss |
45 |
|
On Load Loss |
299 |
|
Accessories |
Standard Configuration |
|
Remarks |
N/A |
three phase power transformer

Power Transformer Features
1.Three phase power transformer core is made of imported high-quality cold-rolled silicon steel sheets, which greatly reduces no-load loss and no-load current, and binds the core to ensure the tightness of the core and reduce noise.
2. The high and low voltage windings are made of oxygen-free copper. The low voltage windings of 500KVA and below adopt a double-layer cylindrical structure, and the high-voltage windings adopt a multi-layer cylindrical structure.
3. The transformer connection group adopts Dyn11 to reduce the influence of harmonics on the power grid and improve the power supply quality.
4. The transformer is a fully sealed structure, prolonging the service life, free of hanging cores and maintenance-free.
5. The measured noise value is lower than the standard.
Hot Tags: 76 mva step down 110 kv to 35 kv three phase power transformer, China 76 mva step down 110 kv to 35 kv three phase power transformer manufacturers, factory
You Might Also Like
Send Inquiry












