NM360 Abrasion Resistant Steel
Want to know more about our products? Please contact us by email or phone.
Gnee Steel (Tianjin) Co., Ltd. is one of the most professional nm360 abrasion resistant steel manufacturers and suppliers in China. Welcome to wholesale customized nm360 abrasion resistant steel at competitive price from our factory. Good service and quality products are available.
NM360 Abrasion Resistant Steel Product Description
NM360 wear resistant steel plate refers to special steel mainly used to manufacture the inner rings, outer rings and rolling elements of various types of rolling bearings. It is often referred to as NM360 wear-resistant plate. The rolling steel plate should have high compressive strength and contact fatigue strength, high hardness and wear resistance, and should also have certain toughness and corrosion resistance.
NM360 Abrasion Resistant Steel Plate Chemical Composition
| Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Ni |
B |
|
WNM360 |
≤0.25 |
≤0.70 |
≤1.30 |
≤0.025 |
≤0.010 |
≤1.4 |
≤0.50 |
≤1.00 |
≤0.004 |
The advantages of NM360 Wear Resistant
1. NM360 Wear Plate: Wear tests show that the wear resistance of wear-resistant composite plates is 12-18 times higher than low carbon steel, 5 times higher than stainless steel and high manganese steel, and 1 times higher than as-cast high-chromium iron.
2. NM360 Abrasion Resistant Wear Plate high impact resistance: Due to the use of mild steel substrate, the wear-resistant composite plate has high impact resistance, which fully reflects the advantages of composite materials that are both wear-resistant and impact-resistant. This is beyond the reach of cast wear-resistant materials.
3. Convenient processing performance of NM360: The wear-resistant cladding composite plate can be cold-formed, rolled, and cut by plasma cutting. The wear-resistant composite plate can be easily welded to the surface of the worn parts.
4. NM360 high performance price ratio: Although the cost of using wear-resistant cladding composite panels increases, but comprehensively considering the service life of the machine parts, maintenance costs, shutdown losses, etc., its performance price ratio is about 2-4 times higher than that of ordinary materials. Due to the reasonable utilization of materials, the price of wear-resistant cladding composite panels is 50% lower than that of manual cladding of the same materials. Other specifications can be customized according to customer requirements.
GNEE (Tianjin) Multinational Trade Co.,Ltd is a leading manufacturer and supplier of aluminum foil products for a variety of industries and applications. Founded in 2008, After about 15 years development, the services and products has extended to more than 100 countries and area across the world.
NM360 Wear Resistant Plate Product Picture
GNEE Group Team Picture And Exhibition Photo
GNEE Customer Office Visit
We have a professional staff to provide a detailed response to your order. If you have any questions about NM360 Abrasion Resistant Steel, please contact me.
Hot Tags: NM360 Abrasion Resistant Steel, China NM360 Abrasion Resistant Steel manufacturers, factory, Armored Steel, NM400 Wear Resistant Steel Plate, NM500 Wear Resistant Steel Plate, NM550 Wear Resistant Steel Plate, AR Plate Steel, NM600 Wear Resistant Steel Plate
You Might Also Like
Send Inquiry