-
Jan 05, 2024201 Stainless Steel Plate: Common Uses Explained201 stainless steel is an economical austenitic stainless grade in which part of the nickel is replaced by manganese and nitrogen. Its typical composition is roughly 16–18% chromiu -
Jan 05, 2024Repairing Scratches on 304 Stainless Steel Sheet: Grading and MethodsScratch repair on 304 sheet is a two-part problem: geometry and metallurgy. This guide grades damage from hairline marks to structural gouges, matches each grade to a grinding, pic -
Jan 05, 2024304 Stainless Steel Plate Welding Cracks: Causes, Controls and RepairWelding cracks in 304 stainless steel plate come from four distinct mechanisms: solidification cracking, liquation cracking, hydrogen-assisted cold cracking and grain-boundary sens -
Jan 04, 2024304 vs 316 Stainless Steel: Composition, Corrosion and SelectionThe difference between 304 and 316 comes down to molybdenum, and it changes corrosion behaviour far more than mechanical properties. This comparison sets out specified chemistry, P -
Jan 04, 2024304 Stainless Steel Plate: Properties, Corrosion and FabricationGrade 304 stainless steel plate combines 18% chromium with 8% nickel to give broad corrosion resistance, high ductility and cleanable surfaces. This guide covers its composition an -
Jan 04, 2024316L Stainless Steel Plate: Molybdenum-Grade Service Applications316L stainless steel plate adds 2.0-3.0% molybdenum and a 0.030% carbon ceiling to the austenitic family, raising pitting resistance to a PREN of about 24-26. This guide maps the g -
Jan 04, 2024310S Stainless Steel Plate: High-Temperature Applications310S is the low-carbon 25% Cr / 20% Ni austenitic heat-resisting grade used for furnace internals, radiant supports and high-temperature ducting. This guide sets out its standard c -
Jan 04, 2024316L Stainless Steel Plate: Properties, Welding and Selection316L plate is the low-carbon, molybdenum-bearing austenitic grade used for chloride and dilute acid service in chemical, food and desalination plant. This guide covers its composit -
Jan 02, 2024310S Stainless Steel Sheet: 25Cr-20Ni Heat-Resistant Plate Guide310S is the low-carbon 25Cr-20Ni austenitic grade (UNS S31008) used for furnace internals and other parts that must resist oxidation up to about 1150 C. This guide sets out its com -
Jan 02, 2024316L Stainless Steel Plate: Corrosion, Welding and Grade Selection316L is the low-carbon 17Cr-12Ni-2.5Mo austenitic grade (UNS S31603) chosen where chlorides or reducing acids make 304L inadequate. This guide works through its four headline perfo -
Jan 02, 2024316L Stainless Steel Plate: Alloying Elements and Trace Elements316L stainless steel plate contains trace elements including chromium (Cr), nickel (Ni), molybdenum (Mo), silicon (Si), phosphorus (P), sulfur (S) and so on. -
Jan 02, 2024Trace Elements in 310S Stainless Steel Plate: Roles and Limits310S stainless steel plate relies on a 25% Cr / 20% Ni austenitic matrix, but its service performance at 900-1150 C is decided by elements present at a few hundred ppm. This guide




