Sep 15, 2025 Leave a message

A comprehensive introduction to weathering steel standards - ASTM Standard Specification

The following ASTM standards primarily define weathering steel, covering a variety of product forms, including plate, strip, profiles, bar, and tube.

The core commonality of these standards is that, through the addition of alloying elements (such as Cu, Cr, and Ni), a dense, strongly adherent protective rust layer ("patina") forms on the steel surface when exposed to the atmosphere, thereby preventing further corrosion from progressing internally.

 

ASTM A588

ASTM A588 is a high strength low-alloy structural steel specification with improved atmospheric corrosion resistance for structural steel shapes such as angles, channel and beams, as well as steel plate and bars. The A588 specification is intended primarily for use in welded bridges and other structures where savings in weight or added durability is important along with the longer life cycle due to its corrosion resistant properties.

The atmospheric corrosion resistance of A588 is substantially better than that of carbon steels such as A36 and A572-50 with or without copper addition. When properly designed and exposed to the atmosphere, A588 is suitable for many applications in the unpainted condition.

ASTM A588 has a 50ksi minimum yield strength and a 70ksi minimum tensile strength.

 

info-1706-1279

 

ASTM A242

 

ASTM A242 is a high strength low-alloy structural steel specification with improved atmospheric corrosion resistance. This specification is normally applicable to steel plates through one-half inch in thickness.
The atmospheric corrosion resistance of A242 is substantially better than that of carbon steels such as A36 and A572-50 with or without copper addition. When properly exposed to the atmosphere, A242 is suitable for many applications in the unpainted condition.

ASTM A242 has a 50ksi minimum yield strength and a 70ksi minimum tensile strength.

 

info-644-645

 

ASTM A606-4

ASTM A606-4 is a high strength, low alloy specification with improved atmospheric corrosion properties covering hot and cold rolled steel sheet, strip and coil intended for use in structural and miscellaneous purposes, where savings in weight and/or added durability is important. A606-4 contains additional alloying elements and provides a level of corrosion resistance substantially better than that of carbon steels with or without copper addition. When properly designed and exposed to the atmosphere, A606-4 can be used bare (unpainted) for many applications.

ASTM A606-4 has a 50ksi minimum yield strength and a 70ksi minimum tensile strength.

info-640-641

 

ASTM A847

ASTM A847 is a high strength low alloy steel covering cold-formed welded square and rectangular tubing and pipe. The atmospheric corrosion resistance of this steel in most environments is substantially better than carbon steel with or without copper addition. ASTM A847 is intended for welded, bolted or riveted construction of bridges and other structures where high strength and enhanced corrosion resistance are required. When properly designed and exposed to the atmosphere, A847 can be used bare (unpainted) for many applications.

ASTM A847 has a 50ksi minimum yield strength and a 70ksi minimum tensile strength.

info-630-645

 

 

ASTM A709-50W

ASTM A709-50W is a standard specification for structural steel in bridges. ASTM A709-50W covers high strength, low allow steel structural shapes, plates and bars. The atmospheric corrosion resistance of this steel in most environments is substantially better than carbon steel with or without copper addition. ASTM A709-50W shall have an atmospheric corrosion index of 6.00 or higher. When properly designed and exposed to the atmosphere, A709-50W is suitable for many applications in the bare (unpainted) condition.

info-504-645

 

 

ASTM A871-65

ASTM A871-65 is a high strength low-alloy structural steel plate with improved atmospheric corrosion resistance. This specification provides for a 65ksi minimum yield strength and an 80ksi minimum tensile strength plus the atmospheric corrosion resistance of this steel in most environments is substantially better than that of carbon steels with or without copper addition. When properly designed and exposed to the atmosphere, this steel can be used bare (unpainted) for many applications. The primary application for A871-65 is transmission and lighting poles as an aesthetically pleasing alternative to a galvanized structure.

info-644-645

ASTM A572-65

ASTM A572-65 is a high strength low-alloy columbium-vanadium structural steel. This specification provides for a 65ksi minimum yield strength and an 80ksi minimum tensile strength. The primary application for ASTM A572-65 is galvanized transmission and lighting poles. We purchase this grade with a limited .05Max Silicon content to facilitate the subsequent galvanizing process. ASTM A572-65 is supplied to meet a Charpy V-Notch test of 15ft/LB at -20F.

info-644-645

FAQ

 

 

info-644-645

01.What are the ASTM standards?

ASTM standards are developed by committees of relevant industry professionals who meet regularly in an open and transparent process to deliver standards, test methods, specifications, guides, and practices. ASTM creates many standard procedures governing environmental and engineering services, such as: ASTM E1527-13.

02.What is the ASTM standard for corten steel?

The ASTM specifications are A588, A242, A606-4, A847, A871-65 and A709-50W. The primary trademarked product is Cor-ten®. The selection of a particular ASTM weathering steel specification is dependent on the type of product desired. ASTM A588 covers structural shapes, plate, and bar.

03.What is the difference between ASTM A588 and A242?

A588 (Corten B): Optimized and commonly used for thicker structural sections (plates, shapes, bars up to 8 inches thick/200mm depending on grade). A242 (Corten A): More commonly associated with thinner material forms like sheet, strip, and plates (especially Grade K). Summary Table: ASTM A242 (Corten A) vs.

04.What is ASTM A588 used for?

ASTM A588, in particular, is intended for use in applications where savings in weight, added durability and extended life cycle are paramount, such as welded bridges and buildings. ASTM A588 is commonly used to construct pedestrian bridges, highway bridge girders, ships, tanks, railcars, fencing and sculptures.

05.What is ASTM A709?

The ASTM A709 is the Standard Specification for Structural Steel for Bridges and encompasses carbon, high-strength low-alloy, and quenched and tempered alloy steels used as structural plates in the construction of bridges.

 

info-493-493

Company profile

 

Founded in 2008, Gnee (Tianjin) Supply Chain Group Co., Ltd. specializes in the global trade and processing of Corten steel products.
• We handle all kinds of Corten engineering projects, such as bridges, gardens, hotels, and facade systems.
• Compliant with ASTM, EN, and other international standards; third-party inspection supported.
• Exported to over 200 countries and regions worldwide.
• 8 subsidiaries across China and overseas, ensuring global service coverage.
Application Fields: Architecture, landscaping, gardening, cladding, and urban infrastructure.

 

 

Send Inquiry

whatsapp

phone

Email

Inquiry