ASTM A606 Corten sheet, a High Strength Low Alloy (HSLA) steel sheet. This unique product is 20-30% lighter than carbon steel and exhibits up to four times the atmospheric corrosion resistance of common structural carbon steel. A606 typically arrives without rust but as it is exposed to external conditions, the steel develops a weathered orange-brown oxide that is resistant to corrosion, increasing its life and durability, and does not require painting. It is weldable, formable, punchable, and machinable using the proper techniques.
Originally COR-TEN® was a steel material owned by U.S. Steel. This product has lived on as A606-4 steel or A588 finish. COR-TEN® was an alloy that was specifically designed to form a stable rust-like surface appearance that would not require painting. The dark brown oxidation that coats the steel does not allow for deeper penetration of wet weather such as rain, snow, ice, fog etc. Testing in laboratories has essentially shown that the alloying elements in the steel clog the pores of the steel surface and this results in protecting the inner steel.
It should be noted that A606 is not recommended for use in areas with extremely high rainfall or a high content of salt in the air, persistent fog, or extremely high humidity. It should also be noted that runoff from this product may cause rust stains.
Properties
Tensile Strength ksi - 70 minimum
Yield 2% Offset ksi - 40
General Characteristics of A606 Steel Sheet
- Unique rust coating creates a protective layer
- Can be machined
- Weldable
- Formable
- Typical Uses
Sheets are a popular choice for:
- Roofing
- Decorative outdoor containers
- Architectural elements
Plates are used in structural applications including:
- Bridges
- Railway cars
- Transmission towers
- High strength to weight ratio applications
MATERIAL PROPERTIES of ASTM A606 Type 4 Weathering Steel
The following material properties are ASTM specifications and will be confirmed on the Mill Test Report
|
Grade |
Yield Point (KSI) |
Tensile Strength (KSI) |
Min. 2" Elongation % |
|
As Rolled |
50 |
70 |
22 |
|
Annealed or Normalized |
45 |
65 |
22 |
CHEMICAL COMPOSITION of ASTM A606 Type 4 Weathering Steel
The following composition properties are ASTM specifications for A606 Type 4 grade. Note that Type 4 may contain additional alloy elements to resist corrosion at the discretion of the manufacturer.
| Carbon | Manganese | Sulfer | Copper |
| 0.22% | 1.25% | 0.04% | 0.20% min |
Company profile
Founded in 2008, Gnee (Tianjin) Supply Chain Group Co., Ltd. specializes in the global trade and processing of Corten steel products.
• We handle all kinds of Corten engineering projects, such as bridges, gardens, hotels, and facade systems.
• Compliant with ASTM, EN, and other international standards; third-party inspection supported.
• Exported to over 200 countries and regions worldwide.
• 8 subsidiaries across China and overseas, ensuring global service coverage.
Application Fields: Architecture, landscaping, gardening, cladding, and urban infrastructure.
