Jan 04, 2026 Leave a message

ASTM A387 GRADE 22 Class 1 | Steel Plate

ASTM A387 grade 22 class 1 is ASTM A387 grade 22 steel in the annealed condition. The graph bars on the material properties cards below compare ASTM A387 grade 22 class 1 to: wrought alloy steels in the same category (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest.

info-455-452

The alloy is considered a low-alloy grade of steel due to its high chromium and molybdenum content. ASTM A387 Grade 22 Class 1 ASTM A387/A387M steel includes a variety of grades including 9Cr-1Mo and 11Cr-1Mo. These steel grades feature elevated levels of chromium to better suit pressure-containing application in comparison to standard structural steels. By providing a higher level of chromium, the alloy can resist oxidation and better resists oxidation at high temperatures.ASTM A387 Grade 22 Class 1 ASTM A387/A387M is a material-graded steel alloy used in the production of pressure vessels and boilers

 

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum (Cr-Mo) alloy steel plate for high-temperature pressure vessels, featuring ~2.25% Chromium and ~1% Molybdenum, with lower tensile strength requirements (75-100 ksi) than Class 2, making it suitable for boilers, reactors, and petrochemical equipment needing strength and corrosion resistance at elevated temperatures, and is easily weldable.

 

Key Characteristics

Material: Chromium-Molybdenum (Cr-Mo) Alloy Steel.

Application: Welded boilers, pressure vessels, heat exchangers, oil & gas, chemical processing, power generation.

Distinction from Class 2: Class 1 has lower strength requirements compared to Class 2, which is stronger.

In simpler terms

This specific steel grade offers a good balance of strength, resistance to creep, and corrosion at high temperatures, making it a workhorse for heavy industrial equipment like oil refinery vessels and power plant components, where reliability under heat and pressure is crucial.

 

info-821-272

 

Alloy Steel ASTM A387 GR 22 CL. 1 / 2 Plates Chemical Composition :

Grade C Mn P S Si Cr Mo
Alloy Steel Gr.22 0.04 – 0.15 0.25 – 0.66 0.035 0.035 0.5 max 1.88 – 2.62 0.85 – 1.15

 

Alloy steel ASME SA387 GR. 22 CL. 1 Plates Mechanical Properties :

ASTM A387 Grade 22 Tensile Strength (ksi) Tensile Strength (MPa) Yield Strength (ksi) Yield Strength (MPa) Elongation in 200mm (%) Elongation in 50mm (%) Reduction of area in %
Class 1 60-85 415-585 30 205 – 18 45
Class 2 75-100 515-690 45 310 – 18 45

 

Equivalents for ASTM A387 Grade 22 Alloy Steel Plates

BS EN ASTM/ASME DIN
622-515B 10 CRMO910 A387-22-1 10 CRMO910

 

1What is ASTM A387 GRADE 22 Class 1?

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum (Cr-Mo) alloy steel plate designed for high-temperature, weldable pressure vessels and boilers, featuring ~2.25% Chromium and ~1.00% Molybdenum for enhanced strength at elevated temperatures and improved corrosion resistance, with Class 1 indicating a specific, generally lower, tensile strength range compared to Class 2.

 

2What is ASTM A387 GRADE 22 Class 1 equivalent to ?

ASTM A387 Grade 22 Class 1 is a chrome-moly steel for pressure vessels, with key international equivalents being ASME SA387 Grade 22, European EN 10CrMo9-10, and British BS 622-515B, all referring to the same 2.25%Cr-1%Mo composition for high-temperature service, differing mainly in mechanical properties between Class 1 and Class 2.

 

3What are the typical application fields of ASTM A387 GRADE 22 Class 1 ?

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum alloy steel used for high-temperature, high-pressure applications, primarily in pressure vessels, boilers, and heat exchangers, serving the oil & gas, petrochemical, and power generation industries, where it forms components like reactors, piping, and tanks needing strength, creep resistance, and corrosion resistance, especially in sour gas environments.

 

4What is the composition of ASTM A387 GRADE 22 Class 1 ?

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum alloy steel for high-temperature pressure vessels, containing around 2.25% Chromium (Cr) and 1.00% Molybdenum (Mo), with controlled levels of Carbon (C), Manganese (Mn), Phosphorus (P), Sulfur (S), and Silicon (Si) to enhance strength, corrosion resistance, and weldability at elevated temperatures, with Class 1 differing from Class 2 only in mechanical (tensile) properties, not chemistry.

 

5What is the density of ASTM A387 GRADE 22 Class 1 ?

The density of ASTM A387 Grade 22 Class 1, a chromium-molybdenum alloy steel, is consistently listed around 7.85 g/cm³ (or 0.284 lb/in³), typical for steels, though some sources cite slightly varying values like 7.80 g/cc or 7.9 g/cm³. This density reflects its primary iron composition with additions of chromium and molybdenum, common for pressure vessel applications.

 

Contact now

 

Get an valued quotation for ASTM A387 GRADE 22 Class 1, Contact GNEE Steel

info-514-725

 

 

Send Inquiry

whatsapp

phone

Email

Inquiry