ASTM A516 Steel Plate is a carbon steel plate specially designed for service in welded pressure vessels where improved notch toughness is critical. Supplied in grades A516 Grade 55, A516 Grade 60, A516 Grade 65, and A516 Grade 70, this material is widely used in boiler fabrication, storage tanks, heat exchangers, and industrial pressure vessel steel plate applications.
For projects requiring higher strength and improved toughness, A516 Grade 70 steel plate is the most commonly selected option. GNEE supplies A516 Grade 70 steel plates with competitive pricing, fast delivery, and full material traceability for all grades.
Dimensions & Processing - A516 Steel Plate Dimensions
Thickness: 6 mm – 150 mm
Width: up to 3000 mm
Length: up to 12,000 mm
Process options: beveling, cutting, drilling, profiling, rolling, surface treatments
Edge: Mill edge or cut edge
Surface Condition: Hot rolled, shot blasted, or pickled
Custom sizes and cut-to-length service available.
Available Grades - A516 Grade 55 / 60 / 65 / 70 Steel Plate
ASTM A516 Grade 55 Steel Plate
ASTM A516 Grade 60 Steel Plate
ASTM A516 Grade 65 Steel Plate
ASTM A516 Grade 70 Steel Plate
Plates can be supplied in as-rolled, normalized, or stress-relieved condition upon request. For projects requiring higher notch toughness or low-temperature reliability, A516 Grade 70 normalized plate (A516 Grade 70N) is often preferred.
Chemical Composition - ASTM A516
| Element | Grade 55 (%) | Grade 60 (%) | Grade 65 (%) | Grade 70 (%) |
|---|---|---|---|---|
| Carbon (C) | ≤0.18 | ≤0.21 | ≤0.24 | ≤0.27 |
| Manganese (Mn) | 0.85–1.20 | 0.85–1.20 | 0.85–1.20 | 0.85–1.20 |
| Phosphorus (P) | ≤0.035 | ≤0.035 | ≤0.035 | ≤0.035 |
| Sulfur (S) | ≤0.035 | ≤0.035 | ≤0.035 | ≤0.035 |
| Silicon (Si) | 0.13–0.45 | 0.13–0.45 | 0.13–0.45 | 0.13–0.45 |
Mechanical Properties of A516 Steel Plate
| Grade | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) |
|---|---|---|---|
| A516 Gr 55 | ≥220 | 380–515 | ≥21 |
| A516 Gr 60 | ≥260 | 415–550 | ≥21 |
| A516 Gr 65 | ≥260 | 450–585 | ≥19 |
| A516 Gr 70 | ≥260 | 485–620 | ≥17 |
A516 Steel Plate Typical Applications
A516 steel plate is widely used in:
- Industrial boilers & steam drums
- Petrochemical pressure vessels
- LPG & LNG storage tanks
- Heat exchangers and condenser units
- Power generation equipment
- Pressure tanks and separators
- Low-temperature service tanks
A516 Grade 70 remains the most used grade for high-pressure welded structures, but many fabricators also choose Grade 60 or Grade 65 depending on the design requirements.
Normalized vs As-Rolled - A516 Steel Plate Options
Both delivery conditions are available:
As-Rolled A516 Steel Plate
Suitable for standard boiler and vessel fabrication
Shorter production time
Normalized A516 Steel Plate (Including A516 Grade 70N)
Improved toughness
More uniform microstructure
Recommended for low-temperature service, thick plates, or pressure-critical equipment
Many EPC contractors specify Charpy V-Notch impact testing for normalized plates.
Why Choose GNEE - Reliable Supplier of A516 Steel Plates
GNEE supplies ASTM A516 steel plates to global EPC contractors, distributors, and tank fabricators, offering:
Full grade range: 55 / 60 / 65 / 70
Over 1 million tons of annual inventory
Fast shipment of multiple ports options
Global export to Southeast Asia, Middle East, Europe, Africa, and Americas
Custom cutting, beveling, and surface treatment
Packaging & Shipping
- Bundled with steel strips
- Waterproof wrapping & edge protection
- Wooden pallets or as per buyer request
- Shipping by container or bulk vessel
Request a Quote - A516 Grade 70 / A516 Grades 55–70
Ready to source ASTM A516 Grade 70 Steel Plate or other grades?
👉 Contact us to get your free quote and mill certificate.
If you also work with general structural steels, see our guide to A36 vs A283 vs A572 vs A516 Steel Plate: Key Differences and Equivalents for comparison.
FAQ
Is SA516 the same as ASTM A516?
Yes. SA516 is the ASME version, ASTM A516 is the ASTM version.
What is the most commonly used grade?
A516 Grade 70 is the most widely applied due to its strength and toughness.
When should I choose normalized material?
For thicker plates, low-temperature service, or when Charpy impact requirements are specified.
What is A516 Grade 70N?
A normalized version of A516 Grade 70. It provides better toughness and is recommended when Charpy impact requirements are specified.
What is A516 steel?
ASTM A516 is a PVQ carbon steel plate intended primarily for service in welded pressure vessels at moderate or lower temperatures, where notch toughness is important.
What is the difference between A36 and A516?
ASTM A516 (Grades 60-70) offers a yield strength of 260–290 MPa and tensile strength up to 550 MPa, combined with superior low-temperature toughness down to -45°C. In comparison: ASTM A36 – Yield strength 250 MPa, tensile 400–550 MPa, general low-temperature performance
| Other steel plate by GNEE | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Clad steel plate | P265GH+410,S355JR+410,A516Gr70+316, A537CL1+304L,Q235B+304L,Q345B+304, A516Gr70(NACE)+410,A537CL1+904L, A537CL1+316L,A516Gr70+304L,A537CL1+304 ,A516Gr70+410,A516Gr70+904L |
2-300mm(Based plate),1-50mm(Composited plate) | / | UT, AR, TMCP.Normalized, Quenched and Tempered,Z Direction Test, Charpy V-Notch impact TestThe Third Party Test , Coated or Shot Blasting and Painting. |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | A204 Grade B,A515 Grade 70,A537 Class 1,SA387 Grade 11 Class 1,P265GH,S537 Class 2,P355Q,P275N,P355N,P690Q,Q345R, | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Ship Plate | ABS AH32,ABS DH32,ABS EH32,ABS FH36,ASTM A131 A, ASTM A131 EH32,ASTM A131 AH36,CCS A,CCS AH32,LR AH32, DNV A36,BV AH32 |
8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |
