The extraordinary properties of S960Q ultra-high-strength steel-its remarkable 960 MPa yield strength combined with good toughness and weldability-are not accidental. They are the direct result of a meticulously controlled, multi-stage production process.
At GNEE Steel, we partner with leading mills that master this sophisticated metallurgical chain.
This article provides a transparent, expert-level walkthrough of how S960Q steel plates are manufactured, demonstrating the engineering excellence behind every sheet we supply.
Production Process for S960Q Steel Plate
The production process for S960Q encompasses steelmaking, rolling, heat treatment, and inspection, with core steps as follows:
Steelmaking:
Utilising scrap steel, pig iron, and molten iron as raw materials, initial smelting is conducted via electric furnace (100-tonne capacity) or converter to ensure controllable composition.
Alloy composition is refined and adjusted via LF furnace treatment, reducing sulphur and phosphorus content (P ≤ 0.025%, S ≤ 0.015%).
VD/VOD vacuum degassing minimises hydrogen and oxygen content to prevent internal plate defects.
Slab Forming:
Large-section slabs are produced via continuous or mould casting, with surface cleaning ensuring absence of cracks, inclusions, and other defects.
Rolling:
Slabs undergo uniform heating to approximately 1200°C in roller-hearth or soaking furnaces to suppress element segregation.
Multi-pass controlled rolling is performed on 4100-4200mm wide plate mills, with final rolling temperature precisely controlled near the phase transformation point.
Immediate water quenching or laminar cooling post-rolling refines the austenite grain structure.
Heat Treatment:
Quenching: Heated to 900–950°C, held, then quenched using high-pressure water jets (cooling rate >30°C/s) to obtain a martensitic microstructure.
Tempering: Tempered within the 600–650°C range to relieve quenching stresses and balance strength and toughness (resulting in tempered sorbite microstructure).
Inspection:
Individual ultrasonic flaw detection (Grade 1/2/3) to detect internal defects.
Mechanical properties tested on samples (yield strength ≥960MPa, impact energy at -20°C ≥30J) and Z-direction resistance to laminar tearing (Z15/Z25/Z35).
Detailed Explanation Of S960Q Steel Plate Production Process
Advanced Steelmaking – The Foundation of Purity
The journey begins with creating steel of exceptional chemical purity and homogeneity, which is critical for the final plate's consistency and performance.
Primary Steelmaking (Electric Arc Furnace or Basic Oxygen Furnace): High-quality scrap and virgin iron ore are melted. The choice of furnace depends on the desired chemistry and quality grade.
Secondary Refining (Ladle Furnace & Vacuum Degassing): This is the most critical step for S960Q quality. In the ladle furnace, the precise alloying elements-carbon, manganese, silicon, and micro-alloys like niobium (Nb), vanadium (V), and titanium (Ti)-are added under tight control. Subsequent vacuum degassing removes harmful gases like hydrogen (to prevent flaking) and oxygen, drastically reducing non-metallic inclusions. This results in a "cleaner" steel with superior internal integrity, directly impacting toughness and fatigue resistance.

Continuous Casting – Shaping the Initial Form
The refined molten steel is then cast into a semi-finished product.
The liquid steel is poured into a water-cooled copper mold, forming a solid shell.
It is continuously withdrawn and further cooled, forming a long slab of specific thickness and width.
For high-grade steels like S960Q, electromagnetic stirring is often used during casting to ensure a uniform, fine-grained structure without segregation.
The Thermo-Mechanical Control Process (TMCP) – The Core of Strength and Toughness
This integrated rolling and cooling process is what differentiates modern high-strength steel production. TMCP is divided into two key phases:
A. Controlled Rolling:
Reheating: The slab is reheated to a high temperature (~1200°C) to dissolve micro-alloying elements into the austenite structure.
Roughing Stage: The slab is rolled to an intermediate thickness. The temperature remains high, allowing for recrystallization, which refines the austenite grain size.
Finish Rolling: This occurs in a lower, non-recrystallization temperature range. The austenite grains are deformed (elongated) but do not recrystallize. This creates a high density of deformation bands within the grains, which will later become nucleation sites for a very fine ferrite structure during cooling-a key to achieving high strength and toughness.
B. Accelerated Cooling (AcC or DQ):
Immediately after the final rolling pass, the plate is rapidly cooled using high-pressure water jets.
This controlled quenching "freezes" the fine-grained, deformed austenite structure, transforming it into an extremely fine microstructure of low-temperature transformation products (like lath bainite or tempered martensite).
This microstructural refinement is the primary mechanism that gives S960Q its ultra-high strength and good toughness without excessive carbon content, which benefits weldability.
Quenching and Tempering (Q&T) – Achieving the Optimal Balance
For the S960Q grade, the TMCP plate undergoes this additional heat treatment to perfect its properties.
- Quenching: The plate is reheated to form austenite again and then rapidly quenched (in water or oil), creating a very hard, but brittle, martensitic structure.
- Tempering: The quenched plate is reheated to a specific temperature (below the lower critical temperature) and held for a precise time. This crucial step:
- Relieves internal stresses from quenching.
- Precipitates fine alloy carbides, increasing strength.
- Imparts ductility and toughness to the hard martensite, achieving the optimal balance of strength and toughness required by the S960Q standard.

Finishing, Inspection, and Certification
Heat Treatment: After Q&T, plates may undergo stress relieving or flattening as needed.
Ultrasonic Testing (UT): Every plate is subjected to automatic UT to detect and mark any internal imperfections, ensuring structural integrity.
Final Dimensional Processing: Plates are sheared or flame-cut to final ordered dimensions.
Comprehensive Testing & Certification: Samples are taken for destructive testing (tensile, impact toughness at -40°C, chemical analysis). The results are compiled into an official 3.1 or 3.2 Mill Test Certificate (MTC), which provides full traceability and guarantees the plate meets all requirements of EN 10025-6 for S960Q.
Why GNEE Steel's S960Q Plate Process Guarantees Reliability
Understanding this complex process underscores why supplier choice is critical. GNEE Steel sources S960Q plates exclusively from mills that master this entire chain:
Control at Every Stage: We ensure our partners employ state-of-the-art vacuum degassing, precise TMCP lines, and automated Q&T furnaces.
Consistency is Key: This level of process control guarantees batch-to-batch consistency in mechanical properties, which is non-negotiable for fabricators.
Performance Beyond the Standard: The focus on extreme purity and microstructural control results in S960Q plates with excellent weldability and crack resistance, reducing fabrication risks and costs for our clients.
Conclusion: Engineering Excellence, Delivered
The production of S960Q steel plate is a symphony of advanced metallurgy, precise process control, and rigorous quality assurance. It transforms raw materials into a product capable of building lighter cranes, stronger mining equipment, and more resilient structures.
When you source S960Q from GNEE Steel, you are not just buying a commodity-you are investing in the culmination of this sophisticated engineering process, backed by full certification and expert technical support.
For your next critical project requiring certified, high-performance S960Q steel plates, partner with a supplier who understands the process inside and out. Contact GNEE Steel today for a quotation and detailed technical documentation.
GNEE Steel also supplies a variety of high-strength steel plates, such as A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E, etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to info@gneesteels.com. You are welcome to consult us, and we are very willing to answer your questions.
| Grades Of Carbon and Low-alloy High-strength Steels Supplied By GNEE | |||||
| ASTM/ASME | ASTM A36/A36M | ASTM A36 | |||
| ASTM A283/A283M | ASTM A283 Grade A | ASTM A283 Grade B | ASTM A283 Grade C | ASTM A283 Grade D | |
| ASTM A514/A514M | ASTM A514 Grade A | ASTM A514 Grade B | ASTM A514 Grade C | ASTM A514 Grade E | |
| ASTM A514 Grade F | ASTM A514 Grade H | ASTM A514 Grade J | ASTM A514 Grade K | ||
| ASTM A514 Grade M | ASTM A514 Grade P | ASTM A514 Grade Q | ASTM A514 Grade R | ||
| ASTM A514 Grade S | ASTM A514 Grade T | ||||
| ASTM A572/A572M | ASTM A572 Grade 42 | ASTM A572 Grade 50 | ASTM A572 Grade 55 | ASTM A572 Grade 60 | |
| ASTM A572 Grade 65 | |||||
| ASTM A573/A573M | ASTM A573 Grade 58 | ASTM A573 Grade 65 | ASTM A573 Grade 70 | ||
| ASTM A588/A588M | ASTM A588 Grade A | ASTM A588 Grade B | ASTM A588 Grade C | ASTM A588 Grade K | |
| ASTM A633/A633M | ASTM A633 Grade A | ASTM A633 Grade C | ASTM A633 Grade D | ASTM A633 Grade E | |
| ASTM A656/A656M | ASTM A656 Grade 50 | ASTM A656 Grade 60 | ASTM A656 Grade 70 | ASTM A656 Grade 80 | |
| ASTM A709/A709M | ASTM A709 Grade 36 | ASTM A709 Grade 50 | ASTM A709 Grade 50S | ASTM A709 Grade 50W | |
| ASTM A709 Grade HPS 50W | ASTM A709 Grade HPS 70W | ASTM A709 Grade 100 | ASTM A709 Grade 100W | ||
| ASTM A709 Grade HPS 100W | |||||
| ASME SA36/SA36M | ASME SA36 | ||||
| ASME SA283/SA283M | ASME SA283 Grade A | ASME SA283 Grade B | ASME SA283 Grade C | ASME SA283 Grade D | |
| ASME SA514/SA514M | ASME SA514 Grade A | ASME SA514 Grade B | ASME SA514 Grade C | ASME SA514 Grade E | |
| ASME SA514 Grade F | ASME SA514 Grade H | ASME SA514 Grade J | ASME SA514 Grade K | ||
| ASME SA514 Grade M | ASME SA514 Grade P | ASME SA514 Grade Q | ASME SA514 Grade R | ||
| ASME SA514 Grade S | ASME SA514 Grade T | ||||
| ASME SA572/SA572M | ASME SA572 Grade 42 | ASME SA572 Grade 50 | ASME SA572 Grade 55 | ASME SA572 Grade 60 | |
| ASME SA572 Grade 65 | |||||
| ASME SA573/SA573M | ASME SA573 Grade 58 | ASME SA573 Grade 65 | ASME SA573 Grade 70 | ||
| ASME SA588/SA588M | ASME SA588 Grade A | ASME SA588 Grade B | ASME SA588 Grade C | ASME SA588 Grade K | |
| ASME SA633/SA633M | ASME SA633 Grade A | ASME SA633 Grade C | ASME SA633 Grade D | ASME SA633 Grade E | |
| ASME SA656/SA656M | ASME SA656 Grade 50 | ASME SA656 Grade 60 | ASME SA656 Grade 70 | ASME SA656 Grade 80 | |
| ASME SA709/SA709M | ASME SA709 Grade 36 | ASME SA709 Grade 50 | ASME SA709 Grade 50S | ASME SA709 Grade 50W | |
| ASME SA709 Grade HPS 50W | ASME SA709 Grade HPS 70W | ASME SA709 Grade 100 | ASME SA709 Grade 100W | ||
| ASME SA709 Grade HPS 100W | |||||
| EN10025 | EN10025-2 | EN10025-2 S235J0 | EN10025-2 S275J0 | EN10025-2 S355J0 | EN10025-2 S355K2 |
| EN10025-2 S235JR | EN10025-2 S275JR | EN10025-2 S355JR | EN10025-2 S420J0 | ||
| EN10025-2 S235J2 | EN10025-2 S275J2 | EN10025-2 S355J2 | |||
| EN10025-3 | EN10025-3 S275N | EN10025-3 S355N | EN10025-3 S420N | EN10025-3 S460N | |
| EN10025-3 S275NL | EN10025-3 S355NL | EN10025-3 S420NL | EN10025-3 S460NL | ||
| EN10025-4 | EN10025-4 S275M | EN10025-4 S355M | EN10025-4 S420M | EN10025-4 S460M | |
| EN10025-4 S275ML | EN10025-4 S355ML | EN10025-4 S420ML | EN10025-4 S460ML | ||
| EN10025-6 | EN10025-6 S460Q | EN10025-6 S460QL | EN10025-6 S460QL1 | EN10025-6 S500Q | |
| EN10025-6 S500QL | EN10025-6 S500QL1 | EN10025-6 S550Q | EN10025-6 S550QL | ||
| EN10025-6 S550QL1 | EN10025-6 S620Q | EN10025-6 S620QL | EN10025-6 S620QL1 | ||
| EN10025-6 S690Q | EN10025-6 S690QL | EN10025-6 S690Q1 | EN10025-6 S890Q | ||
| EN10025-6 S890QL | EN10025-6 S890QL1 | EN10025-6 S960Q | EN10025-6 S960QL | ||
| EN 10149 | EN 10149-2 | S315MC | S355MC | S420MC | S460MC |
| S500MC | S550MC | S600MC | S650MC | ||
| S700MC | S900MC | S960MC | |||
| JIS | JIS G3101 | JIS G3101 SS330 | JIS G3101 SS400 | JIS G3101 SS490 | JIS G3101 SS540 |
| JIS G3106 | JIS G3106 SM400A | JIS G3106 SM400B | JIS G3106 SM400C | JIS G3106 SM490A | |
| JIS G3106 SM490YA | JIS G3106 SM490B | JIS G3106 SM490YB | JIS G3106 SM490C | ||
| JIS G3106 SM520B | JIS G3106 SM520C | JIS G3106 SM570 | |||
| DIN | DIN 17100 | DIN17100 St52-3 | DIN17100 St37-2 | DIN17100 St37-3 | DIN17100 RSt37-2 |
| DIN17100 USt37-2 | |||||
| DIN 17102 | DIN17102 StE315 | DIN17102 EStE315 | DIN17102 TStE315 | DIN17102 WStE315 | |
| DIN17102 StE355 | DIN17102 EStE355 | DIN17102 TStE355 | DIN17102 WStE355 | ||
| DIN17102 StE380 | DIN17102 EStE380 | DIN17102 TStE380 | DIN17102 WStE380 | ||
| DIN17102 StE420 | DIN17102 EStE420 | DIN17102 TStE420 | DIN17102 WStE420 | ||
| DIN17102 StE460 | DIN17102 EStE460 | DIN17102 TStE460 | DIN17102 WStE460 | ||
| DIN17102 StE500 | DIN17102 EStE500 | DIN17102 TStE500 | DIN17102 WStE500 | ||
| DIN17102 EStE285 | |||||
| GB | GB/T700 | GB/T700 Q235A | GB/T700 Q235B | GB/T700 Q235C | GB/T700 Q235D |
| GB/T700 Q275 | |||||
| GB/T1591 | GB/T1591 Q345A | GB/T1591 Q390A | GB/T1591 Q420A | GB/T1591 Q420E | |
| GB/T1591 Q345B | GB/T1591 Q390B | GB/T1591 Q420B | GB/T1591 Q460C | ||
| GB/T1591 Q345C | GB/T1591 Q390C | GB/T1591 Q420C | GB/T1591 Q460D | ||
| GB/T1591 Q345D | GB/T1591 Q390D | GB/T1591 Q420D | GB/T1591 Q460E | ||
| GB/T1591 Q345E | GB/T1591 Q390E | ||||
| GB/T16270 | GB/T16270 Q550C | GB/T16270 Q550D | GB/T16270 Q550E | GB/T16270 Q550F | |
| GB/T16270 Q620C | GB/T16270 Q620D | GB/T16270 Q620E | GB/T16270 Q620F | ||
| GB/T16270 Q690C | GB/T16270 Q690D | GB/T16270 Q690E | GB/T16270 Q690F | ||
| GB/T16270 Q800C | GB/T16270 Q800D | GB/T16270 Q800E | GB/T16270 Q800F | ||
| GB/T16270 Q890C | GB/T16270 Q890D | GB/T16270 Q890E | GB/T16270 Q890F | ||
| GB/T16270 Q960C | GB/T16270 Q960D | GB/T16270 Q960E | GB/T16270 Q960F | ||
| GB/T16270 Q500 | |||||




