SA387Gr91CL2 hot-rolled plate and SA1017Gr92CL2 hot-rolled plateare two types of alloy steel plates used in high-temperature and high-pressure environments, widely applied in the manufacturing of boilers and pressure vessels. Although they share similarities in application, there are significant differences between them in terms of chemical composition, mechanical properties, and application scenarios. The following is a detailed comparison of these two materials.
Chemical Composition
SA387Gr91CL2
SA387Gr91CL2 hot-rolled plate is a chromium-molybdenum alloy steel. Its main components include chromium (Cr) and molybdenum (Mo), along with small amounts of other alloying elements such as vanadium (V) and nitrogen (N). The chromium content typically ranges from 8% to 9%, and the molybdenum content is approximately 1%. The combination of these elements endows the material with excellent oxidation resistance and high-temperature resistance.
SA1017Gr92CL2
SA1017Gr92CL2 hot-rolled plate is also a chromium-molybdenum alloy steel, but its chemical composition differs slightly. It contains higher contents of chromium (about 9%) and molybdenum (about 2%), and is additionally added with trace amounts of tungsten (W) and boron (B). The incorporation of these elements enhances the material's high-temperature strength and creep resistance.
Mechanical Properties
SA387Gr91CL2
This material exhibits good strength and toughness in high-temperature environments. Its yield strength and tensile strength at room temperature are approximately 415 MPa and 585 MPa, respectively. Due to its excellent thermal stability and oxidation resistance, SA387Gr91CL2 alloy steel plate is commonly used in high-temperature boilers and pressure vessels.
SA1017Gr92CL2
SA1017Gr92CL2 has higher strength and durability at high temperatures. Its yield strength and tensile strength are generally higher than those of SA387Gr91CL2, reaching approximately 450 MPa and 620 MPa, respectively. The design of this material primarily considers long-term service life under high-temperature and high-pressure conditions, so it is widely used in supercritical and ultra-supercritical boilers.
Application Scenarios
SA387Gr91CL2
Owing to its excellent oxidation resistance and moderate mechanical properties, SA387Gr91CL2 hot-rolled plate is widely used in pressure vessels, heat exchangers, boilers, and other equipment in the petrochemical industry. This material performs particularly well in high-temperature environments below 600°C.
SA1017Gr92CL2
SA1017Gr92CL2 hot-rolled plate is more suitable for applications requiring extremely high temperatures and pressures, such as supercritical and ultra-supercritical power plant boilers. In these environments, the material needs to withstand extreme temperatures and pressures while maintaining long-term structural stability and creep resistance.
Manufacturing and Processing
SA387Gr91CL2
This material has good weldability, but preheating and post-weld heat treatment are required to avoid welding cracks. Under normal circumstances, stress relief annealing is necessary after welding to extend the material's service life.
SA1017Gr92CL2
Due to its higher alloy content, the welding and processing of SA1017Gr92CL2 steel plate are relatively complex. During the welding process, it is necessary to strictly control heat input and conduct precise heat treatment to ensure the material's mechanical properties and creep resistance.
Heat Treatment
SA387Gr91CL2
It usually requires normalizing and tempering treatment to improve the material's toughness and strength. The normalizing temperature is generally between 950°C and 1000°C, and the tempering temperature is between 730°C and 780°C.
SA1017Gr92CL2
The heat treatment process for this material is more complex, typically involving quenching and high-temperature tempering. The quenching temperature is generally between 1050°C and 1100°C, and the tempering temperature is between 750°C and 800°C, to ensure the material's stability and strength at high temperatures.
Conclusion
Although both SA387Gr91CL2 and SA1017Gr92CL2 are high-temperature alloy steels, the differences in their chemical compositions and mechanical properties make them suitable for different application scenarios.
SA387Gr91CL2 is more suitable for medium-high temperature applications, while SA1017Gr92CL2 is specifically designed for extreme high-temperature and high-pressure environments. When selecting materials, reasonable selection should be made based on specific working condition requirements to ensure the safety and economy of the equipment.
FAQ
Q: What is SA 387 material?
A: A high quality chrome molybdenum alloy steel plate intended specifically for use in weldable carbon steel pressure vessels at elevated temperatures. Added molybdenum gives the material greater temperature tensile strength and the chromium provides improved corrosion resistance.
Q: What is SA387 grade 11 equivalent to?
A: Sa 387 Gr 11 Equivalent Material is the ASME SA387 in the US markets with the European Union having modules in 13CrMoSi5-5 grade. The Sa 387 Gr 11 Cl 2 Equivalent Material is the SA387-11-2 of the ASME and ASTM standard.
Q: What is the difference between SA387 Grade 11 Class 1 and Class 2?
A: The difference between SA 387 Grade 11 Class 1 and Class 2 Plate lies in their mechanical properties. However, they both have the same chemical composition. The tensile strength and yield strength of class 2 material is higher than that of class 1, whereas the elongation for class 1 is higher compared to class 2.
Q: What is the temperature range for SA 387 GR 11?
A: In the lower end of the temperature range SA 387 Gr 11 (1150 °F min tempering temperature) , and SA 387 Gr 22 (1250 °F min tempering temperature) are used. These grades can be specified in either class 1 or 2 and can also be provided in the Normalized & Tempered or Quenched and Tempered.
Q: What is SA 387 GR 9 material?
A: SA 387 GR 9 is a chromium-molybdenum alloy steel widely used in high-temperature applications such as pressure vessels and power generation equipment and it provides excellent resistance to oxidation and creep, making it ideal for long-term service at elevated temperatures.
Q: What is the chemical composition of SA 387 GR 22?
A: 22 CL. 2 plate chemical composition includes Chromium (Cr) 2%, Molybdenum (Mo) 1%, Manganese (Mn) 0.5%, Silicon (Si) 0.5%, Phosphorus (P) 0.03%, Sulfur (S) 0.03%, and Carbon (C) 0.1%.
Q: What is the equivalent material of SA 387 GR 12?
A: Sa 387 Gr 12 Equivalent Material can be classified as Asme SA 387 for the USA, for the European Union, the equivalent grade to this material is EN 13CrMo4-5. In Germany and England, the equivalent grades are DIN 13CRM044 and BS 620B, respectively. Apart from this, the equivalent grade for France is AFNOR 36206 15CD2.
Q: What is a A387 Grade 5 equivalent to?
A: Other Designations. Other designations that are equivalent to AISI A387 grade 5-PVQ alloy steel include the following: ASME SA387 (5) ASTM A314 (502)
Q: What is SA 387 GR 5 material?
A: chrome molybdenum alloy steel plate
SA387 GR 5 CLASS 2
A high quality chrome molybdenum alloy steel plate intended specifically for use in weldable carbon steel pressure vessels at elevated temperatures. Added molybdenum gives the material greater temperature tensile strength and the chromium provides improved corrosion resistance.
Besides commonly used A387/SA387, we also offer more targeted steel plate types as shown in the table below: high-strength low-alloy plates for heavy engineering loads, wear-resistant plates to reduce equipment wear, weather-resistant plates for long-term outdoor use, and marine plates that meet shipbuilding requirements. You can always contact us for more information on any of the types that interest you.
Email: info@gneesteels.com
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |




