Dec 15, 2025 Leave a message

EN 10028-3 Grade P275N EN10028 P275 N STEEL PLATE

EN 10028-3 and P275N Steel Grade

 

What Is EN 10028-3 and P275N Steel Grade?

EN 10028-3 is a European standard specifically developed for flat hot rolled steel products intended for pressure equipment. This standard focuses on normalized fine-grain steels that are required to perform reliably under moderate to high pressure and temperature conditions. Among the grades covered by this standard, P275N is one of the most commonly used pressure vessel steel plates in global industrial projects.

 

The designation P275N reflects both its application and mechanical performance. The letter "P" indicates pressure purposes, "275" refers to the minimum yield strength of 275 MPa, and "N" signifies that the steel is supplied in a normalized condition, which enhances toughness and structural uniformity. As a hot rolled pressure vessel steel plate, P275N is widely used in boilers, heat exchangers, storage tanks, and industrial vessels where safety, weldability, and consistent mechanical behavior are critical.

P275N Steel

EN 10028-3 And P275N Steel Grade

Manufacturing Process and Normalizing Treatment

EN 10028-3 P275N steel plates are produced through a hot rolling process, followed by normalizing heat treatment. Normalizing involves heating the steel above its critical temperature and then cooling it in still air. This process refines the grain structure and improves impact resistance, especially at lower service temperatures.

 

Hot rolling allows for the production of thicker plates with excellent internal soundness, making P275N suitable for medium and heavy plate applications. The normalizing condition ensures stable mechanical properties throughout the plate thickness, which is essential for pressure equipment manufacturing and welding operations.

 

Chemical Composition Requirements of P275N

The chemical composition of P275N steel is carefully controlled to ensure strength, toughness, and weldability. Compared with general structural steels, carbon content is kept relatively low, while manganese and micro-alloying elements contribute to strength and fine grain structure.

 

Typical Chemical Composition (EN 10028-3 P275N)

Element C (%) Mn (%) Si (%) P (%) max S (%) max
P275N ≤0.20 0.80–1.50 ≤0.40 0.025 0.015

This balanced composition allows P275N hot rolled plates to maintain good toughness while remaining easy to cut, form, and weld during fabrication.

 

Mechanical Properties of EN 10028-3 P275N

Mechanical performance is the core reason why P275N is widely specified for pressure vessels. Its yield strength is well-suited for pressure-bearing structures that do not require extremely high strength but demand excellent reliability and safety margins.

 

Mechanical Properties of P275N

Thickness (mm) Yield Strength (MPa) Tensile Strength (MPa) Elongation (%)
≤16 ≥275 410–560 ≥23
16–40 ≥265 410–560 ≥23
40–60 ≥255 410–560 ≥22

In addition, EN 10028-3 requires impact testing to ensure sufficient toughness, making P275N suitable for pressure equipment operating at sub-zero or fluctuating temperatures.

 

Comparison Between P275N and S355 Steel Plate

P275N is often compared with S355, a common structural steel grade under EN 10025. While both are hot rolled steel plates, their design purposes and performance priorities differ significantly.

 

P275N vs S355 – Key Differences

Item P275N (EN 10028-3) S355 (EN 10025)
Main Application Pressure vessels & boilers Structural construction
Heat Treatment Normalized As-rolled / normalized
Yield Strength ≥275 MPa ≥355 MPa
Toughness Requirement Mandatory impact testing Depends on sub-grade
Design Focus Safety under pressure Load-bearing structures

Although S355 offers higher yield strength, it is not specifically designed for pressure equipment. P275N, on the other hand, prioritizes uniform mechanical properties, toughness, and pressure resistance, making it a safer and more compliant choice for pressure vessel manufacturing.

 

Typical Applications of EN 10028-3 P275N Steel Plate

Due to its stable mechanical behavior and compliance with European pressure vessel standards, P275N hot rolled steel plate is widely used in:

  • Industrial pressure vessels
  • Boilers and steam drums
  • Heat exchangers
  • LPG and gas storage tanks
  • Chemical processing equipment
  • Oil and gas pressure systems

These applications require materials that can withstand internal pressure while maintaining excellent weldability and long-term performance.

 

Why P275N Is a Preferred Choice for Pressure Equipment Projects?

EN 10028-3 Grade P275N offers an optimal balance between strength, toughness, and fabrication performance. Compared with general structural steels, it provides greater assurance in safety-critical pressure environments. For international buyers and engineering contractors, choosing P275N hot rolled pressure vessel steel plate helps meet regulatory requirements while maintaining cost efficiency.

 

With stable supply, flexible plate sizes, and proven global acceptance, P275N remains a key material in modern pressure equipment manufacturing.

 

 Click to send your inquiry and get tailored technical support today

 

Send Inquiry

whatsapp

phone

Email

Inquiry