Oct 30, 2025 Leave a message

DNV E420 Certified Shipbuilding Steel: Properties and Uses

DNV Grade E420

DNV Grade E420 shipbuilding steel plate is an extra high-strength, fine-grain structural steel designed for demanding marine applications, particularly for constructing ship hulls, decks, and other structural components. It is certified by the classification society DNV (Det Norske Veritas) and is manufactured with properties like high strength, excellent toughness, and good weldability, often achieved through quenching and tempering heat treatment. The E designation indicates Charpy impact testing at -40 degrees Celsius, and 420 refers to the minimum yield strength of 420 MPa.

Chemical Composition

The chemical composition of DNV E420 is specified with maximum limits of carbon 0.20 percent, silicon 0.55 percent, manganese 1.70 percent, phosphorus 0.025 percent, sulfur 0.025 percent, and nitrogen 0.020 percent. The low carbon and impurity limits support weldability and toughness, while the fine-grain practice and manganese content provide the strength needed for the 420 MPa yield level.

Mechanical Properties

DNV E420 is specified with a minimum yield strength of 420 MPa, a tensile strength of 530-680 MPa, and a minimum elongation of 18 percent across thickness ranges up to 150 mm. The Charpy V-notch impact test is performed at -40 degrees Celsius with impact energy requirements of 28 J for energy 1 and 42 J for energy 2.

Applications in Shipbuilding

In large bulk carriers and oil tankers, DNV E420 is suitable for deck longitudinal frames, side shell plates of Cape-size bulk carriers, and structural components in the cargo hold area of very large crude carriers. For example, when DNV Grade E420 is used for the deck web beams of a 200,000 DWT bulk carrier, the plate thickness can be reduced by 15 percent while still meeting the structural strength requirements under heavy-load conditions. In ultra-large container ships with over 18,000 TEU capacity, the grade is used for hatch coamings and top web beams, where it handles the concentrated loads from stacked containers and wave impacts. The grade is also applied in offshore engineering equipment.

Supply Specifications

Typical supply specifications include thickness from 6 mm to 250 mm, width from 1500 mm to 4200 mm, and length from 3000 mm to 18000 mm, with quenched and tempered heat treatment. Additional services include ultrasonic examination, Z-direction testing, Charpy impact testing, and third-party testing, with coated or shot-blasted and painted surfaces. These parameters represent commercial availability ranges and should be confirmed against the specific order and the applicable DNV rules.

Frequently Asked Questions

What does E420 mean in the DNV designation?? E indicates Charpy impact testing at -40 degrees Celsius, and 420 refers to the minimum yield strength of 420 MPa.

What are the mechanical properties of DNV E420?? Minimum yield strength of 420 MPa, tensile strength of 530-680 MPa, minimum elongation of 18 percent across thickness ranges up to 150 mm, and impact energy of 28 J and 42 J at -40 degrees Celsius.

What is the chemical composition of DNV E420?? Maximum limits of carbon 0.20 percent, silicon 0.55 percent, manganese 1.70 percent, phosphorus 0.025 percent, sulfur 0.025 percent, and nitrogen 0.020 percent.

Where is DNV E420 used in shipbuilding?? Deck longitudinal frames and side shell plates of Cape-size bulk carriers, cargo hold structures of very large crude carriers, and hatch coamings and top web beams of ultra-large container ships, plus offshore engineering equipment.

How much weight can E420 save in hull design?? For example, when DNV Grade E420 is used for the deck web beams of a 200,000 DWT bulk carrier, the plate thickness can be reduced by 15 percent while still meeting the structural strength requirements under heavy-load conditions.

What supply sizes and testing are typical for DNV E420?? Thickness from 6 mm to 250 mm, width from 1500 mm to 4200 mm, and length from 3000 mm to 18000 mm in quenched and tempered condition, with ultrasonic examination, Z-direction testing, Charpy impact testing, and third-party testing available.

Send Inquiry

whatsapp

phone

Email

Inquiry