High Quality Corten Steel Plate Spah B480 ASTM A242 A588 Weather Resistant Steel

Corten A/B/ Spa-h / B480 / ASTM A242 A588 Corten Steel plate

Corten steel, also called Weather Resistant steel or Atmospheric Corrosion Resistant steel, it is known as a low cost and highly effective material.

Corten steel is classed as being a "self -protecting "steel for its "patina "which results from protective surface oxidation and develops during exposure to the atmosphere; The oxide layer that gives the steel its distinctive appearance and enhances weather resistant capabilities compared to standard steels, also the improved corrosion performance can lead to improved service life.

The charcteristic for this steel: The surface will be rusted after somedays, but need to take some time around 3 Month; Also if you want it to be rusted very fast based on building requirement, we can do the rust processing too in our workshop,very good finish and the color can keep 3-5 years;

Specification as follows:

Common Grade Composition and Mechanical property as follows:

Also we can do the rust finish on the surface, and some introduction as follows:

Specification
Thicnkess: 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.6mm, 2.0mmm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10mm etc.
Width: 1000-2000mm
Length: 2000mm, 2500mm, 3000mm....6000mm or as requirement

Rust finish process:
Step 1. The steel surface by shot peening or pickling to remove the surface scale.
Step 2. Preparation of weathering steel surface treatment agent, the weight percentage of 0.1% ~ 3% NaCl, 0.3% ~ 3% FeSO4 , 0.1% ~ 3% CuSO4 and 0.3% ~ 3% NaHSO3 mixed with water and poured into the barrel, Uniform until the solution was sky blue.
Step 3. Will be equipped with a good surface treatment agent into the sprayer, spray evenly on the steel surface for 3-5 seconds to the surface of the steel into a brown, spray finished once, so that the steel surface dry naturally, this time with suction absorbent material steel structure The lower part of the residual liquid, to ensure that the upper and lower drying time consistent until the steel structure after drying, repeat the spraying and drying process 2 times to ensure that the corten steel surface to generate a uniform and dense rust layer.
Due to the high corrosion resistance of corten steel sheets, it normally takes from 1 to 2 years from a completely new steel sheet to the formation of a stable, dense, rust-red protective layer (50-100mic thick) in natural environments. For some dry areas May be even longer.If you want to generate a simple uniform rusty yellow, it also takes about 1 month.In the process, the components of the color will occur uncontrollably, from blue and black to orange red, then rusty red, the last reddish brown Dramatic, uneven change process. 

Q: Why is it called Corten steel?

A: COR stands for corrosion resistance and TEN stands for tensile strength. (Today, while the terms Corten and COR-TEN are used interchangeably, COR-TEN® is a trademarked product of US Steel.) The steel was not introduced as an architectural metal, however, until the 1950s.

Q: Why is Corten steel so expensive?

A: However, given Corten's longevity and lower maintenance needs, it represents a long-term investment. Mild steel is certainly a cost-effective alternative, but if a protective coating, such as powder coating or galvanising, is applied for added longevity, the cost comparison with Corten starts to level out.

Q: What is the difference between Corten steel and normal steel?

A: Unlike ordinary steel, Corten steel does not require frequent painting or coating to retain its corrosion resistance. This low-maintenance feature makes it an appealing alternative for applications requiring long-term upkeep.

Q: How long will corten steel last?

A: Generally, Corten steel will patina or rust within six months of atmospheric exposure. Most weathering steel types need wet/dry weather cycles to develop and oxidize. With the protective rust that provides corrosion resistance, Corten steel can last upwards of a few decades to over 100 years.

Q: What is a cheaper alternative to corten steel?

A: Mild Steel does not form a protective layer but aesthetically is very similar to Corten Steel. Corten starts to develop its trademark Patina quicker than Mild Steel. Mild Steel is a more cost-effective alternative to Corten for those budget-conscious gardeners.

Founded in 2008, Gnee (Tianjin) Supply Chain Group Co., Ltd. specializes in the global trade and processing of Corten steel products.
• We handle all kinds of Corten engineering projects, such as bridges, gardens, hotels, and facade systems.
• Compliant with ASTM, EN, and other international standards; third-party inspection supported.
• Exported to over 200 countries and regions worldwide.
• 8 subsidiaries across China and overseas, ensuring global service coverage.
Application Fields: Architecture, landscaping, gardening, cladding, and urban infrastructure.