Jan 26, 2026 Leave a message

How does ASTM A517 Grade E differ from ASTM A517 Grade B?

How does ASTM A517 Grade E differ from ASTM A517 Grade B?

ASTM A517 Grade E and Grade B are both high-strength, quenched and tempered alloy steel plates for pressure vessels with similar 100 ksi minimum yield strengths, but they differ primarily in their chemical compositions (alloying elements like Ni, Cr, Mo, B) designed for specific hardenability, notch toughness, and weldability requirements, rather than major differences in basic tensile strength.

 ASTM A517 Grade E

ASTM A517 Grade E represents a sophisticated alloy steel that undergoes a specific heat treatment-heating to a high temperature, rapidly cooling (quenching), and then reheating (tempering)-to achieve a precise balance of toughness and immense strength. It is a critical material for high-stress energy infrastructure.

 

Key Characteristics:

Deep Hardenability: Thanks to its Nickel and Chromium content, the plate achieves uniform strength even in thicker sections.

Notch Toughness: Designed to absorb significant energy before fracturing, which is vital for preventing catastrophic vessel failure.

Chemical Precision: Features a complex "recipe" of Boron, Copper, and Manganese to optimize the molecular grain structure.

 

Grade Designation:

ASTM A517: High-strength, quenched and tempered alloy steel specification.

Grade E: The specific chemical "flavor" of the A517 family, characterized by its Ni-Cr-Mo alloy mix.

 

Comparison: ASTM A517 Grade E vs Q690

Strength: Both provide high yield strength

Standard: ASTM vs GB standard

Application Focus: A517 Grade E for pressure vessels, Q690 for structures

Toughness Control: A517 emphasizes pressure containment requirements

 

info-739-194

Common Application

Pressure vessel shells

Power plant equipment

Heavy industrial frames

Petrochemical vessels

 

What post-weld treatment is recommended for ASTM A517 Grade E?
For thicker plates or critical vessels, post-weld heat treatment (PWHT) is recommended. PWHT relieves residual stresses, improves toughness in the heat-affected zone, and reduces hydrogen-induced cracking risks. Treatment specifications depend on plate thickness, welding procedure, and ASME requirements, ensuring welded joints retain mechanical properties and service reliability.

What temperature range can ASTM A517 Grade E operate in?
ASTM A517 Grade E performs well in moderate temperature service, maintaining strength and toughness up to ~400°C (752°F). Lower temperatures may require impact testing for fracture resistance verification. Elevated temperatures beyond this may necessitate alternative alloys, such as Cr-Mo steels, for safe and reliable operation in pressure vessels or industrial equipment.

What are the most common applications of ASTM A517 Grade E?
It is widely used for high-pressure vessels, boilers, industrial reactors, petrochemical tanks, and power generation equipment. Selected for high strength, toughness, and reliability, its quenched-and-tempered condition allows thinner plate designs, providing safety, cost efficiency, and performance in demanding industrial applications.

 

ASTM A517 Grade E

Physical Properties Original Value
Density 7.75 g/cc

 

Mechanical Properties Original Value
Tensile Strength, Ultimate 725 - 930 MPa
Tensile Strength, Yield 620 MPa
Elongation at Break 14 %
Modulus of Elasticity 200 GPa
Bulk Modulus 160 GPa
Poissons Ratio 0.29
Shear Modulus 80.0 GPa

 

Component Elements Properties Original Value
Boron, B 0.0015 - 0.0050 %
Carbon, C 0.12 - 0.20 %
Chromium, Cr 1.4 - 2.0 %
Iron, Fe 96.7 %
Manganese, Mn 0.40 - 0.70 %
Molybdenum, Mo 0.40 - 0.60 %
Phosphorus, P 0.035 %
Silicon, Si 0.20 - 0.35 %
Sulfur, S 0.040 %

 

1. Why is ASTM A517 Grade E used for pressure vessels?
ASTM A517 Grade E is designed for high-stress pressure vessels due to its high yield strength, toughness, and deformation resistance. These properties allow vessels to safely handle internal pressures and mechanical loads over long service periods. The steel's ductility also allows thinner walls, optimizing material usage and reducing overall weight while ensuring structural integrity and safety.

 

2. Is ASTM A517 Grade E suitable for low-temperature applications?
ASTM A517 Grade E maintains adequate toughness at moderate low temperatures, but very cold service requires impact testing. Its fracture resistance may decrease at extreme cold. Engineers must verify suitability for low-temperature environments and consider alternative alloys if necessary. Correct selection ensures pressure vessel safety and prevents brittle failure in critical applications.

 

3. How does ASTM A517 Grade E resist fracture?
Fracture resistance comes from its high yield strength, controlled toughness, and quenched-and-tempered microstructure. These properties reduce brittle failure risks under high pressure or mechanical stress. Proper fabrication, welding, and heat treatment ensure reliable long-term performance for pressure vessels, reactors, and other high-stress industrial structures, maintaining safety and compliance.

 

4. Can ASTM A517 Grade E be used in offshore environments?
Yes, but corrosion protection is essential. While mechanically robust, A517 Grade E is not inherently corrosion-resistant. Protective coatings, linings, or cathodic protection are required for marine or offshore use. Proper surface treatment ensures long-term integrity of pressure vessels and heavy industrial components exposed to harsh offshore conditions.

 

5. What are the key mechanical properties of ASTM A517 Grade E?
Key properties include yield strength ~690 MPa, tensile strength 760–900 MPa, elongation ~18%, and impact toughness at moderate temperatures. Its quenched-and-tempered structure ensures resistance to plastic deformation while maintaining weldability. These mechanical properties make it suitable for thick pressure vessel plates and heavy-duty industrial applications requiring high strength and reliability.

 

6. How does ASTM A517 Grade E compare to ASTM A514?
Both are high-strength, quenched-and-tempered steels, but A514 is primarily structural, while A517 emphasizes pressure vessel performance, toughness, and ASME compliance. A514 reduces weight in construction applications, whereas A517 supports high-stress, weight-sensitive vessels. Testing and certification requirements differ according to service conditions and design intent.

 

7. What fabrication considerations are important for ASTM A517 Grade E?
Fabrication requires care due to high strength and quenched-and-tempered properties. Proper cutting, forming, and welding are essential to prevent cracking. Excessive heat input should be avoided, and thick plates may require preheating. Following ASME and qualified procedures ensures mechanical properties and structural integrity are maintained in finished pressure vessels and industrial equipment.

 

Contact now

If you want to learn more about ASTM A517 Grade E GNEE's products, you can send an email toinfo@gneesteels.com . We are more than happy to assist you.

info-532-567

 

Send Inquiry

whatsapp

phone

Email

Inquiry