The protective patina forms on the surface of the corten steel through a cycle of wet and dry periods. The glorious British weather will take care of this! These water features are supplied in their raw steel state, i.e. without a patina. Therefore, if you plan to install your corten water feature in an environment where it's not exposed to rain ( indoors or undercover) then the patina will either not form or take an extended period of time to develop. Under normal environmental conditions, you will see the patina start to develop in a matter of days, certainly after the first rainfall. A full patina will develop on your product after 6 to 12 months depending on atmospheric conditions and the location of the product. Atmospheric conditions that affect the weathering process include: heat, humidity, rainfall, proximity to open water, and proximity to salt water/ coastal winds. The patina will continue to develop and change over time without losing its self-healing properties.
Can the weathering process be accelerated?
Absolutely. There is a wide array of chemicals and treatments that will accelerate the weathering process of corten, however some of these are harsh chemicals that require full PPE for safety reasons, or are bad for the surrounding environment. Instead, we recommend the perfectly safe and still incredibly effective solution of salt, vinegar and water. We recommend using a ratio of 3 teaspoons of salt to every litre of white spirit vinegar. Of course, only a small amount is required to coat a single water feature, so only make as much as you need. To apply this, mix the solution in a fence sprayer or hand spray bottle. Apply on a dry overcast conditions or indoors. Rainwater will wash the solution away before it has chance to work, and if the product is direct sunlight the product will heat and the solution will evaporate before having the chance to work. The best time to apply the solution is in the evening and left overnight on a dry night. Repeat process if required. The patina process is a natural process. Therefore, we cannot accept any guarantee of the exact finish produced by following the above process. Ensure correct PPE is worn at and you spray the solution downwind so no spray is blown back onto you. We still recommend using PPE, but this solution is far safer than other commonly used solutions such as brick acid (hydrochloric acid).



Company profile
Founded in 2008, Gnee (Tianjin) Supply Chain Group Co., Ltd. specializes in the global trade and processing of Corten steel products.
• We handle all kinds of Corten engineering projects, such as bridges, gardens, hotels, and facade systems.
• Compliant with ASTM, EN, and other international standards; third-party inspection supported.
• Exported to over 200 countries and regions worldwide.
• 8 subsidiaries across China and overseas, ensuring global service coverage.
Application Fields: Architecture, landscaping, gardening, cladding, and urban infrastructure.




