Mar 31, 2026 Leave a message

WEAR-RESISTANT-STEEL-PLATE.pdf

HP265 HP295 Hot-Rolled Steel Plates with Excellent Weldability for Gas Cylinders

Products Description

In the field of liquefied petroleum gas (LPG) storage and transportation, HP295 hot-rolled steel sheet, with its unique material properties, has become a core material for manufacturing high-pressure gas cylinders. This low yield strength ratio steel, specially designed for welded gas cylinders, achieves a perfect balance between strength and plasticity through precise composition control and process optimization, providing key guarantees for the safety and lightweight design of gas cylinders.

 

info-554-332

 

Chemical Composition (wt%, GB 6653 Standard)

Grade C (max) Si (max) Mn (max) P (max) S (max) Als (min)
HP265 0.18 0.10 0.80 0.025 0.015 0.015
HP295 0.20 0.35 1.00 0.025 0.015 0.015

 

Mechanical Properties (MPa, GB 6653 Standard)

Grade Yield Strength (Rp0.2, min) Tensile Strength (Rm) Elongation (A5, min) 180° Cold Bend Test
HP265 ≥ 265 410 – 520 ≥ 27% d = 1.5a
HP295 ≥ 295 440 – 560 ≥ 26%

d = 2a

Elongation Advantage: HP265 has an elongation rate 1 percentage point higher than HP295, making it less prone to cracking during the stamping of complex-shaped heads.

Low-Temperature Toughness: Both have passed a -20°C impact test, ensuring the weld and base material's resistance to brittle fracture in cold regions.

 

Welding Process Adaptability

 

Welding Method Compatibility

Manual Arc Welding (SMAW):

Applicability: Both HP265 and HP295 can use low-hydrogen electrodes (such as E4315, E5015), with weld metal hydrogen content ≤5mL/100g, significantly reducing the risk of cold cracking.

Case Study: A gas cylinder factory used HP265 steel plates to weld 5kg LPG cylinders, achieving a first-pass yield rate of 99.2%.

 

Gas Shielded Welding (GMAW/FCAW):

Advantages: HP295 combined with ER50-6 welding wire increases welding efficiency by 3 times compared to manual welding, achieving a heat-affected zone (HAZ) hardness ≤280HV10, meeting gas cylinder repair standards.

 

Innovation: A company used pulsed MIG welding technology to control the welding deformation of HP295 steel plates to within 1mm/m.

Submerged arc welding (SAW): Application scenario: Welding of thick plate (≥8mm) gas cylinder body, HP265 with H08MnA welding wire + SJ101 flux, weld deposition efficiency reaches 15kg/h, joint strength and base material matching rate ≥95%.

 

info-366-235

 

Key Points for Welding Parameter Control

 

Heat Input Limits:

  • HP265: Recommended heat input ≤22kJ/cm to avoid overheating and grain coarsening.
  • HP295: Can be relaxed to ≤25kJ/cm, but interpass temperature must be controlled ≤150℃.

 

Preheating and Post-Heating:
No preheating is required for thickness ≤12mm; for thickness >12mm, HP295 requires preheating to 80-120℃, followed immediately by hydrogen removal treatment at 200-250℃.

 

Post-Weld Inspection Standards:

Radiographic Inspection (RT): Performed according to JB/T 4730.2, with a Grade I pass rate ≥98%.

Bending Test: For both face and back bend test specimens, the diameter is 2a (a is the plate thickness), and no cracks are found at a bending angle of 180°.

 

Typical Application Scenarios

 

Civil Sector: Household LPG Cylinders

Material Selection Logic: HP265 dominates the 5kg-15kg small-capacity cylinder market due to its cost advantage (8%-12% lower than HP295), with a leading company consuming over 200,000 tons annually.

Process Innovation: Utilizing laser cutting + cold stamping forming technology, the stamping breakage rate of HP265 steel plates has been reduced from 3% to 0.5%.

 

Industrial Sector: Vehicle-Mounted CNG Cylinders
Performance Requirements: Must withstand a working pressure of 20MPa. HP295 achieves a fine-grained structure through controlled rolling and cooling processes, achieving a tensile strength of 520MPa, meeting the AD2000 standard.

Case Study: A company customized HP295 cylinders for a European client, which passed a -40℃ low-temperature impact test, resulting in export volumes exceeding 500,000 units per year.

 

Special Gas Storage: Fire Extinguishers

Safety Standards: Must pass the GB4351.1-2005 burst test (holding pressure at 3 times the working pressure for 1 minute without rupture); 4kg dry powder fire extinguishers welded from HP265 steel plates have a 100% pass rate.

Lightweight Design: HP295 is used instead of the traditional Q235B, reducing the cylinder thickness from 2.5mm to 2.0mm, resulting in a weight reduction of 1.2kg per cylinder.

 

Typical Application Scenarios

 

Why Choose GNEE as Your Supplier?

 

18+ years manufacturing experience

Full certification support (EN, JIS, GB standards)

Custom sizes, thickness, and surface treatment

Fast delivery and global logistics

Strict quality inspection (chemical + mechanical testing)

 

 

 

Contact now to get the votrt

 

 

 

Does hot rolling increase yield strength?

The rolls induce plastic deformation. Thus, the yield strength of cold rolled steel is higher than that of hot rolled steel. As an example, a hot rolled steel product may have a yield strength of 235 MPa

 

What is the delivery condition of HP295?

It is usually delivered as hot-rolled coils, but steel plates are also available.

 

What are the surface quality requirements for HP295?

The surface should be smooth, free from cracks, bubbles, inclusions, and other defects.

 

What are the dimensional accuracy requirements for HP295?

Thickness should have minimal variation with the plate, and width tolerances should conform to national standards.

 

What is the meaning of the HP295 designation?

"HP" represents steel for welded gas cylinders, and "295" indicates the lower limit of yield strength.

 

What is the applicable standard for HP295?

It conforms to GB/T 6653-2017 "Steel Plates and Strips for Welded Gas Cylinders" standard.

Send Inquiry

whatsapp

phone

Email

Inquiry