Jun 30, 2025 Leave a message

Q310GNH Weathering Steel: GB/T 4171 Properties

Q310GNH is a weathering structural steel defined in the Chinese standard GB/T 4171 (Atmospheric Corrosion Resisting Structural Steel). The designation Q310GNH means a minimum yield strength of 310 MPa (Q310), atmospheric corrosion resisting steel (GN), and high weathering grade (H). The steel is engineered for corrosive industrial settings, where its self-protecting patina reduces maintenance and extends service life.

Designation and Standard Basis

GB/T 4171 defines weathering steels with designations such as Q235NH, Q295NH, Q295GNH, Q310GNH, Q355NH, Q355GNH, Q415NH, Q460NH, and higher grades. The Q number is the minimum yield strength in MPa; NH indicates atmospheric corrosion resisting structural steel, and GNH indicates the grade with a guaranteed corrosion resistance index. Q310GNH sits in the middle of the range, offering a good balance of strength and cost for general industrial structures.

Mechanical Properties

Per GB/T 4171-2008, Q310GNH requires a minimum yield strength of 310 MPa for thickness up to 16 mm (295 MPa for 16-40 mm) and a tensile strength of 440-600 MPa, with a minimum elongation of 22% for thickness up to 16 mm. Impact testing requirements depend on the delivery condition and agreed specification. The exact values should be taken from the current edition of GB/T 4171 and the mill certificate.

Composition and Corrosion Mechanism

The weathering behaviour comes from small additions of copper, chromium, nickel, and phosphorus. In atmospheric exposure, these elements promote a dense, adherent oxide layer (the patina) that slows further corrosion, so the steel can be used unpainted in suitable environments. Like other weathering steels, Q310GNH needs alternating wet and dry cycles; permanently wet, buried, or heavily chloride-laden conditions prevent a stable patina and require coated or alternative materials.

Equivalent Grades in Other Standards

Q310GNH is sometimes compared with ASTM A588 Grade C and EN 10025-5 S355J2W, but the correspondence is approximate: the strength levels differ (A588 Grade C requires 345 MPa minimum yield, S355J2W requires 355 MPa), so equivalence should be verified for each project rather than assumed. Within China, Q355NH or Q355GNH is the closer strength match to those grades.

Applications

Q310GNH is used for bridges, transmission towers, and outdoor structures where its self-healing rust layer eliminates the need for frequent painting; for railway carriages, shipping containers, and truck frames, where corrosion resistance handles salt exposure and harsh weather; for storage tanks, pipelines, and offshore platforms, providing resistance to sulfurous and acidic environments; and for architectural facades, sculptures, and landscape installations, where the aesthetic patina is valued.

Frequently Asked Questions

Q1: What does Q310GNH mean?

A1: Q310 is the minimum yield strength (310 MPa), GN indicates atmospheric corrosion resisting structural steel, and H indicates the high weathering grade.

Q2: What is the yield strength of Q310GNH?

A2: Minimum 310 MPa for thickness up to 16 mm per GB/T 4171, decreasing slightly with thickness.

Q3: Is Q310GNH the same as ASTM A588?

A3: No. They are similar weathering steels from different standard systems, but the strength levels and composition limits differ; verify equivalence per project.

Q4: Does Q310GNH need painting?

A4: In suitable atmospheric environments it can be used unpainted; the patina provides the protection.

Q5: Where should Q310GNH not be used?

A5: Avoid permanently wet locations, buried service, and severe marine splash zones where chlorides prevent stable patina formation.

Send Inquiry

whatsapp

phone

Email

Inquiry