Jan 15, 2026 Leave a message

Is ASTM A387 Grade 22 Class 1 carbon steel?

Is ASTM A387 Grade 22 Class 1 carbon steel?

No, ASTM A387 Grade 22 Class 1 is not plain carbon steel; it's a low-alloy chromium-molybdenum (Cr-Mo) steel, specifically a 2.25% Chromium, 1% Molybdenum alloy steel designed for elevated temperature pressure vessel service, offering better high-temp strength and corrosion resistance than basic carbon steels. It's categorized under the ASTM A387 standard for alloy steels, not carbon steels.

info-534-534

 

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum (Cr-Mo) alloy steel specifically engineered for the annealed condition. Containing approximately 2.25% Chromium and 1.00% Molybdenum, it serves as a high-quality substrate for welded boilers and pressure vessels designed for elevated temperature service in the oil, gas, and petrochemical sectors.

 

The mechanical profile of ASTM A387 Grade 22 Class 1 is defined by its balanced tensile and yield strength, which sets it apart from the more rigid Class 2 variant. For Class 1, the tensile strength typically ranges from 415 to 585 MPa (60 to 85 ksi), while the minimum yield strength is set at 205 MPa (30 ksi). These parameters are intentionally designed to favor higher ductility and elongation, which usually reaches a minimum of 18%.

This enhanced elasticity is a critical advantage during the fabrication process, particularly when rolling thick plates into cylindrical shells or forming hemispherical heads for large pressure vessels. The material's ability to be cold-formed or hot-formed without inducing micro-cracks allows manufacturers to maintain high quality-assurance standards during the construction phase.

 

Key Characteristics:

Material: Chromoly (Chromium-Molybdenum) Alloy Steel.

Standard: ASTM A387/A387M for pressure vessel plates.

Composition: Approximately 2.25% Chromium (oxidation/corrosion resistance) and 1.00% Molybdenum (high-temp creep strength).

Performance: Excellent resistance to high temperatures and sour (2$H_2S$) gas environments.

 

Common Applications:

Welded boilers and pressure vessels.

Oil, gas, and petrochemical reactors.

Heat exchangers and power generation equipment.

The Importance of Quality Pressure Vessel Fabrication

Why it's used:

The molybdenum content increases tensile strength and creep resistance at elevated temperatures.

Chromium provides surface protection against oxidation and scaling.

 

It maintains structural integrity in demanding high-temperature, high-pressure environments where standard carbon steels would fail.

 

What precautions should be taken when welding ASTM A387 Grade 22 Class 1 ?

When welding ASTM A387 Grade 22 Class 1, key precautions involve thorough surface cleaning, implementing preheating and post-weld heat treatment (PWHT) to prevent cracking (especially stress relief at ~690°C), using low-hydrogen consumables, ensuring proper ventilation, and wearing full Personal Protective Equipment (PPE) like a helmet, gloves, and flame-retardant clothing to manage risks from fumes, radiation, and spatter. This low-alloy Cr-Mo steel is prone to cold cracking due to its hardenability, necessitating careful control of heat input and residual stress.

 

What is ASTM A387 Grade 22 Class 1 material ?

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum alloy steel plate designed for welded boilers and high-temperature pressure vessels, featuring around 2.25% Chromium and 1% Molybdenum, offering good strength and corrosion resistance, with Class 1 indicating a specific, lower tensile strength range compared to Class 2.

 

What is ASTM A387 Grade 22 Class 1 high speed steel?

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum alloy steel plate designed for high-temperature pressure vessels and boilers, offering good corrosion resistance, with specific mechanical properties like lower yield/tensile strength than Class 2, and requiring normalization

 

Plate Specification :

Standard ASTM A387 / ASME SA 387
Width 1000mm-4500mm
Thickness 5mm-150mm
Length 3000mm-18000mm
Impact tested -52° C
Material Alloy Steel
Process of Manufacturing Hot-Rolled (HR)

 

Equivalents for ASTM A387 Grade 22 Alloy Steel Plates

BS EN ASTM/ASME DIN
622-515B 10 CRMO910 A387-22-1 10 CRMO910

 

Specifications for ASTM A387 Grade 22 Alloy Steel Plates

Designation Nominal Chromium
Content (%)
Nominal Molybdenum
Content (%)
A387 Grade 22 2.25% 1.00%

 

ASTM A387 GR 22 CLASS 1

A387 Gr.22 CL.1Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

Cr

Mo

A387 Gr.22 Cl.1

0.04-0.15

0.50

0.30-0.60

0.035

0.035

1.88-2.62

0.85-1.15

 

Grade

A387 Gr.22 CL.2Mechanical Property

Thickness

Yield

Tensile

Elongation

A387 Gr.22 Cl.1

mm

Min Mpa

Mpa

Min %

t≦50

205

415-585

18

 

 

1What is the composition of ASTM A387 Grade 22 Class 1 ?

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum alloy steel for pressure vessels, primarily containing around 2.25% Chromium (Cr) and 1.00% Molybdenum (Mo), with specified limits for Carbon (C), Manganese (Mn), Phosphorus (P), Sulfur (S), and Silicon (Si) to ensure high-temperature strength and corrosion resistance, particularly suitable for welded boiler and pressure vessel service.

 

2Is ASTM A387 Grade 22 Class 1 carbon steel?

No, ASTM A387 Grade 22 Class 1 is not plain carbon steel; it's a chromium-molybdenum (Cr-Mo) alloy steel, specifically designed as a pressure vessel plate for elevated temperature service, offering better heat resistance and corrosion properties than standard carbon steels due to its ~2.25% Chromium and ~1.00% Molybdenum content. While it's related to carbon steel (as it's a steel), the added alloying elements classify it as an alloy steel for high-temperature, high-pressure applications in industries like oil, gas, and petrochemicals, unlike basic carbon steels

 

3What welding rod for ASTM A387 Grade 22 Class 1?

For welding ASTM A387 Grade 22 Class 1 (2.25Cr-1Mo steel), you typically use matching low-alloy steel consumables like E/ER70S-2 for GTAW/SMAW or E7018 for SMAW, often with preheat and post-weld heat treatment (PWHT) to prevent cracking, but for demanding applications, nickel-based electrodes (like ENiCrMo-3/ERNiCrMo-3) are used to avoid carbide formation and carbon migration,  Key considerations are the 2.25% Cr and 1% Mo content, requiring filler metals that match or exceed these elements for service at elevated temperatures, often requiring PWHT, and potentially nickel-based fillers for dissimilar joints or to mitigate issues like temper embrittlement,

 

4What is ASTM A387 Grade 22 Class 1 equivalent to?

ASTM A387 Grade 22 Class 1 is equivalent to ASME SA387 Grade 22 Class 1, and internationally to standards like EN 10 CRMO 9-10, DIN 10CrMo9-10, and BS 622-515B, all specifying a 2.25% Chromium, 1% Molybdenum alloy steel for high-temperature pressure vessels, with Class 1 indicating lower tensile strength than Class 2.

 

5What temperature is ASTM A387 Grade 22 Class 1 ?

ASTM A387 Grade 22 Class 1 is designed for high-temperature service, with its minimum tempering temperature being 1250°F (675°C), and it performs well in applications up to around 600°C (1112°F), offering excellent strength and corrosion resistance in elevated temperature environments like boilers and pressure vessels.

 

6What is the hardness of ASTM A387 Grade 22 Class 1 ?

ASTM A387 Grade 22 Class 1 steel typically has a Brinell hardness of around 190 HBW, though specific hardness can vary slightly with heat treatment, but it's usually within a range corresponding to its tensile properties, with common values around 415-585 MPa tensile strength and minimum yield strength around 205-240 MPa.

 

7What are the typical application fields of ASTM A387 Grade 22 Class 1 ?

ASTM A387 Grade 22 Class 1 is a chrome-moly alloy steel primarily used for high-temperature pressure vessels, boilers, and heat exchangers, serving the oil, gas, petrochemical, and power generation industries due to its excellent resistance to heat, oxidation, and corrosion, especially in demanding environments like refineries. It's ideal for components such as flanges, ducting, and pressure vessels operating under elevated temperatures, with a working range up to about 600°C (1100°F).

 

8What precautions should be taken when welding ASTM A387 Grade 22 Class 1 ?

When welding ASTM A387 Grade 22 Class 1, key precautions involve thorough surface cleaning, implementing preheating and post-weld heat treatment (PWHT) to prevent cracking (especially stress relief at ~690°C), using low-hydrogen consumables, ensuring proper ventilation, and wearing full Personal Protective Equipment (PPE) like a helmet, gloves, and flame-retardant clothing to manage risks from fumes, radiation, and spatter. This low-alloy Cr-Mo steel is prone to cold cracking due to its hardenability, necessitating careful control of heat input and residual stress.

 

9What is ASTM A387 Grade 22 Class 1 material ?

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum alloy steel plate designed for welded boilers and high-temperature pressure vessels, featuring around 2.25% Chromium and 1% Molybdenum, offering good strength and corrosion resistance, with Class 1 indicating a specific, lower tensile strength range compared to Class 2.

 

10What is ASTM A387 Grade 22 Class 1 high speed steel?

ASTM A387 Grade 22 Class 1 is a chromium-molybdenum alloy steel plate designed for high-temperature pressure vessels and boilers, offering good corrosion resistance, with specific mechanical properties like lower yield/tensile strength than Class 2, and requiring normalization

 

Contact now

 

If you want to learn more about ASTM A387 Grade 22 Class 1 GNEE's products, you can send an email to info@gneesteels.com . We are more than happy to assist you.

 

info-514-725

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Send Inquiry

whatsapp

phone

Email

Inquiry