Jan 08, 2026 Leave a message

NM500-QUALITY-CERTIFICATE.pdf

NM500 Wear Resistant Steel Plate | Extreme Abrasion Solution

NM500 is a high-strength, ultra-hard wear-resistant steel plate (around 500 HBW hardness) designed for extreme abrasion, offering extended equipment life in mining, construction, and material handling by resisting wear from rocks, ores, and heavy impacts, with good weldability and toughness, making it ideal for linings, buckets, and crushers. Its alloy composition (C, Mn, Cr, Ni, Mo) provides superior durability, reducing downtime and costs compared to milder steels, and it's a common benchmark for AR500 steel.

 

What Makes NM500 the Ultimate Extreme Abrasion Solution?

 

1. Unmatched Abrasion Resistance

At the core of NM500's performance is its optimized chemical composition-rich in chromium (1.80–2.50%), carbon (0.28–0.38%), nickel (0.80–1.50%), and molybdenum (0.20–0.50%). These elements form hard chromium carbide (Cr₇C₃) precipitates within a tough steel matrix, creating a surface that resists sliding, gouging, and erosive abrasion. Compared to mild steel, NM500 delivers 3–5 times longer service life in high-wear components, eliminating frequent replacements and cutting down on material costs.

 

NM500 Chemical Compositiom

Plate

C

Si

Mn

P

S

Cr

Ni

Mo

B

CEV

CET

thickness mm

max %

max %

max %

max %

max %

max %

max %

max %

max %

typv

typv

4-13

0.27

0.7

1.6

0.025

0.01

1.00

0.25

0.25

0.004

0.49

0.34

(13)-32

0.29

0.7

1.6

0.025

0.01

1.00

0.50

0.30

0.004

0.62

0.41

(32)-40

0.29

0.7

1.6

0.025

0.01

1.00

1.00

0.60

0.004

0.64

0.43

(40)-80

0.30

0.7

1.6

0.025

0.01

1.50

1.50

0.60

0.004

0.74

 

2. Balanced Toughness for Extreme Impact

Unlike ultra-hard materials that sacrifice toughness for wear resistance, NM500 strikes the perfect balance. With a low-temperature impact energy of ≥24 J (-20°C), it withstands heavy impact loads-such as rock collisions in mining, clinker impact in cement plants, or scrap metal strikes in recycling-without brittle fracture. This makes it ideal for applications where abrasion and impact coexist, a common pain point in extreme industrial settings.

info-484-316

3. Versatile Fabricability & Adaptability

Extreme performance doesn't mean limited usability. NM500 supports a full range of fabrication processes: cutting (waterjet, plasma, laser), bending, and welding (with preheating to 150–200°C using AWS E11018-M electrodes). Strict control of phosphorus (≤0.025%) and sulfur (≤0.015%) minimizes weld cracking, ensuring structural integrity for custom-fitted components. It's available in thicknesses from 3mm (ultra-thin for weight-sensitive applications) to 50mm, and even ultra-wide sizes up to 4.5m, reducing material waste and simplifying on-site installation.

4. Thermal Stability & Corrosion Resistance

NM500 maintains its hardness and toughness at temperatures up to 300°C, making it suitable for high-temperature wear scenarios-such as cement kiln chutes, steel mill slag troughs, and power plant coal mill liners. Its chromium content also provides moderate corrosion resistance, enabling reliable performance in outdoor, coastal, or mildly aggressive environments without frequent anti-corrosion treatments.

 

Where NM500 Shines: Extreme Abrasion Applications

NM500 is engineered to solve the most severe wear challenges across industries. Here are its key applications in extreme abrasion environments:

Mining & Quarrying

Mining & Quarrying

Excavator bucket liners, loader cutting edges, crusher liners (jaw, cone, impact), chute liners, truck bed liners, and conveyor impact plates. NM500 withstands the abrasion of hard ores (granite, quartz) and rock impacts, extending component life from months to years.

Cement & Aggregates

Ball mill liners, clinker cooler grates, kiln inlet chutes, silo discharge cones, and conveyor skirting. It resists the extreme abrasion of clinker, limestone, and silica sand, reducing mill shutdowns and boosting cement output by 15–20%.

Steel Mills

Slag troughs, scrap crusher liners, blast furnace skip liners, rolling mill guide plates, and conveyor rollers. NM500 handles the thermal stress and abrasion of slag, iron ore, and steel scrap, minimizing downtime in smelting and processing lines.

Recycling Industry

Shredder liners, hammers, waste compactor plates, and C&D waste crusher components. It stands up to the unpredictable impact and abrasion of mixed scrap, construction debris, and municipal solid waste (MSW).

Other Extreme Environments

Dredging pipes (resists sand/silt erosion and saltwater corrosion), power plant coal chutes/ash handling pipes, and construction machinery blades (bulldozers, asphalt pavers).

Recycling Industry

Why Choose NM500 Over Alternatives?

In extreme abrasion scenarios, NM500 outperforms competing materials by addressing their critical limitations:

  • vs. Mild Steel: 3–5x longer wear life, 50–70% less downtime, and lower lifecycle costs.
  • vs. Mn13 Steel: No work-hardening required-delivers consistent hardness in low-impact, high-abrasion zones.
  • vs. AR500 Steel: Superior impact toughness and weldability, ideal for dynamic wear environments (not just static/ballistic applications).
  • vs. Ceramic Composites: More impact-resistant, easier to fabricate/repair, and lower total cost of ownership.

 

Elevate Your Operations with NM500

Extreme abrasion doesn't have to mean extreme costs. NM500 wear resistant steel plate transforms your most vulnerable components into long-lasting assets, reducing maintenance downtime, cutting replacement costs, and boosting productivity. Whether you're operating a mine, cement plant, steel mill, or recycling facility, NM500 is the solution to conquer wear and drive higher ROI.

Request A Quote

 

Ready to Upgrade to Extreme Abrasion Resistance? Contact our team today for a custom quote, technical data sheet (TDS), or expert advice on tailoring NM500 to your specific application. Let's build a more durable, efficient operation-together.

 

What is NM500 wear-resistant steel sheet?

NM500 is a high-hardness wear-resistant steel sheet produced by quenching and tempering (Q&T). It is designed to withstand severe abrasion and moderate impact, making it ideal for heavy-duty industrial applications such as mining, construction, and bulk material handling.

 

What is the typical hardness range of NM500 steel?

The typical Brinell hardness of NM500 steel sheet is 480–540 HBW, with a nominal hardness of 500 HBW, providing excellent resistance to abrasive wear.

 

Is NM500 steel quenched and tempered (Q&T)?

Yes. NM500 steel is delivered in the quenched and tempered (Q&T) condition, which ensures a balanced combination of high hardness, strength, and impact toughness.

 

What is the difference between Hardox 500 and NM500?

NM500 exhibits a hardness that typically fluctuates between 470-540 HBW, slightly edging out Hardox 500, which generally hovers around 470-530 HBW. This hardness is a key indicator of their prowess in withstanding the effects of abrasive wear and impact.

 

Is AR500 the same as Hardox 500?

Differences Between Hardox and AR500
One of the most significant differences is their hardness level. Hardox grades usually range from 400 to 600, while AR500 has a hardness level 500. Hardox has high toughness and tensile strength and can handle a wide range of extreme temperatures compared to AR500.

 

Other steel plate by GNEE
Name Material Specification (mm) Tons Remark
Clad steel plate P265GH+410,S355JR+410,A516Gr70+316,
A537CL1+304L,Q235B+304L,Q345B+304,
A516Gr70(NACE)+410,A537CL1+904L,
A537CL1+316L,A516Gr70+304L,A537CL1+304
,A516Gr70+410,A516Gr70+904L
2-300mm(Based plate),1-50mm(Composited plate) / UT, AR, TMCP.Normalized, Quenched and Tempered,Z Direction Test, Charpy V-Notch impact TestThe Third Party Test , Coated or Shot Blasting and Painting.
Low Alloy Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo 6 - 350 5788.56 Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection
Pressure Vessel Plate A204 Grade B,A515 Grade 70,A537 Class 1,SA387 Grade 11 Class 1,P265GH,S537 Class 2,P355Q,P275N,P355N,P690Q,Q345R, 3 - 300 8650 Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection
High-Strength Plate A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E 8 - 120 3086.352 Quenched and tempered
Wear-Resistant Plate NM360, NM400, NM450, NM500 6 - 150 3866.297 Quenched and tempered
Ship Plate ABS AH32,ABS DH32,ABS EH32,ABS FH36,ASTM A131 A,
ASTM A131 EH32,ASTM A131 AH36,CCS A,CCS AH32,LR AH32,
DNV A36,BV AH32
8 - 200 2853.621 Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness

Send Inquiry

whatsapp

phone

Email

Inquiry