May 30, 2025 Leave a message

S355J5W Weathering Plate -50℃ 355MPa Yield Grade

S355J5W Weathering Plate -50℃ 355MPa Yield Grade is a high-performance structural steel compliant with the European standard EN 10025-5, designed for demanding outdoor applications that require a combination of strength, cold-temperature toughness, and superior atmospheric corrosion resistance. The designation "S355" signifies a minimum yield strength of 355 MPa (for thicknesses ≤16mm), ensuring robust load-bearing capacity, while "J5" specifies impact resistance at -50℃ (typically ≥27J in longitudinal tests), making it suitable for use in frigid climates or environments with extreme temperature fluctuations. The "W" in the grade denotes its weathering capability, achieved through strategic alloying with elements like copper (Cu), chromium (Cr), nickel (Ni), and phosphorus (P). These elements work together to form a dense, adherent oxide layer on the surface, which acts as a natural barrier to reduce corrosion rates by 2–8 times compared to conventional carbon steel, eliminating the need for frequent protective coatings and lowering lifecycle maintenance costs.

 

Mechanically, the plate offers a tensile strength range of 490–630 MPa and an elongation rate of ≥21%, balancing structural integrity with formability for welding, cutting, and fabrication. Its -50℃ impact resistance ensures resistance to brittle fracture in freezing conditions, making it an ideal choice for critical infrastructure such as bridges in northern regions, railway carriages, offshore platforms, and transmission towers exposed to harsh weather. The weathering property excels in challenging environments like industrial zones with high pollution, coastal areas with salt exposure, or humid climates, where standard steel would corrode rapidly.

 

Available in various thicknesses and state of supply (hot-rolled, normalized, or normalized-rolled), S355J5W meets rigorous quality standards, though users should verify compliance with the latest EN 10025-5 revisions (e.g., EN 10025-5:2024), as newer grades like S355K2W (with -40℃ impact) may serve as alternatives based on project requirements. Internationally, it aligns with equivalent grades such as China's Q355NHJ5W and the U.S. A588 Grade K, facilitating its use in global engineering projects. By combining high yield strength, extreme-temperature toughness, and inherent corrosion resistance, this plate delivers reliable performance in some of the most demanding atmospheric conditions, making it a preferred choice for long-lasting, low-maintenance structural solutions.

Certified ASTM A242 Weathering Steel

 

FAQ

Q: What does "355MPa Yield Grade" mean for S355J5W?
A: It indicates a minimum yield strength of 355 MPa for thicknesses up to 16mm.

 

Q: At what temperature is its impact resistance tested?
A: -50℃, ensuring toughness in extremely cold environments.

 

Q: How does the "W" in S355J5W protect against corrosion?
A: The "W" denotes weathering steel; alloy elements (Cu, Cr, Ni) form a protective oxide layer to slow rust.

 

Q: What are typical applications for this plate?
A: Bridges, transmission towers, containers, and outdoor structures in corrosive or cold climates.

Q: Are there equivalent grades in other standards?


A: Yes, e.g., China's Q355NHJ5W and the U.S. A588 Grade K.

 

Send Inquiry

whatsapp

phone

Email

Inquiry