May 31, 2025 Leave a message

S460J2W Structural Plate, Weathering & -20℃ Impact Resistant

The S460J2W Structural Plate, Weathering & -20℃ Impact Resistant is a premium-grade steel compliant with EN 10025-5:2004, designed for challenging environments requiring high strength, extreme low temperature durability, and natural resistance to atmospheric corrosion. With a minimum yield strength of 460MPa (for thickness ≤16mm), it provides robust load-bearing capacity while excelling in sub-zero conditions, thanks to its "J2" designation-indicating impact resistance tested at -20℃ with a minimum KV2 value of 27J.

 

Engineered with alloying elements like copper (0.25–0.55%), chromium, and nickel, this steel forms a dense, adherent rust layer that acts as a protective barrier against corrosion, reducing the need for frequent paint or coatings in moderate to corrosive atmospheres. This weathering property minimizes lifecycle maintenance costs while ensuring long-term structural integrity. Mechanical properties remain consistent across thicknesses: yield strength decreases slightly to 440MPa (16–40mm) and 400MPa (63–80mm), while tensile strength ranges from 550–720MPa (thin plates) to 530–680MPa (thicker sections), with an elongation rate of ≥19% for ductility.

 

The -20℃ impact resistance makes it ideal for structures in cold climates, such as northern railway bridges, offshore platforms in icy regions, or industrial frameworks exposed to freezing temperatures. Its weldability is supported by a balanced chemical composition, though proper procedures-including controlled heat input and preheating for thicker sections-are recommended to maintain the toughness of heat-affected zones.

 

Typical applications include cold-climate infrastructure (towers, storage tanks), transportation (railway carriages, shipping containers), and coastal structures where salt, moisture, and low temperatures accelerate corrosion in conventional steels. By combining high strength, weathering resistance, and extreme low temperature toughness, S460J2W offers a reliable, cost-effective solution for long-lasting structural projects. Always consult the EN standard or suppliers for detailed technical specifications to ensure suitability for specific engineering needs.

 

 

Introduction to S355J0W, S355K2W and S355J0WP European Standard Weathering Steel

FAQ

Q: What does the "J2" in S460J2W signify?
A: "J2" means the steel is impact-tested at -20℃, with a minimum KV2 value of 27J for toughness in cold conditions.

Q: What is the primary advantage of S460J2W over J0W?
A: It offers superior impact resistance at -20℃ (vs. 0℃ for J0W), making it suitable for colder environments.

Q: How does this steel resist atmospheric corrosion?
A: Alloy elements like copper and chromium form a protective rust layer that slows substrate corrosion, reducing maintenance.

Q: What is the yield strength for thicker plates (e.g., 63–80mm)?
A: Yield strength is 400MPa for 63–80mm thicknesses, slightly lower than thinner sections (460MPa ≤16mm).

Q: In which industries is S460J2W commonly used?
A: Ideal for cold-climate infrastructure (bridges, towers), transportation (railway, containers), and coastal/industrial structures needing low temperature durability and weather resistance.

 

Send Inquiry

whatsapp

phone

Email

Inquiry