S460mc Steel Plate and EN 10149-2 S460 Mc Material

S460mc is a hot-rolled super strength low-alloy grade. S460mc Steel Plate is designed with a superior chemical composition of carbon, silicon, manganese, phosphorus, sulfur, aluminum with additives of niobium, vanadium, and titanium.

The superior concentration in the S460 Mc grade gives these modules excellent resistance to corrosion and oxidation across stress-induced systems. The high yield strength S460mc Steel grade has excellent formability with enhanced load-bearing capacities across different applications.

Available size:

Thickness: 2.4mm--16mm

Width: 900mm--1850mm

Length: 2000mm to 12000mm

It is a high-strength alloy grade. The S460mc Steel Equivalent grades are BS 50F45, ASTM GR65, SEW092, NFA E455, UNE AE 440HC and QStE460TM grades. The Equivalent may have some differences; however, they exhibit excellent bending and cutting characteristics. The S460mc Material Equivalent components can be easily welded following standard welding operations, making them highly desirable.

Designed with excellent mechanical strength the S460mc Material Properties exhibit a minimum yield strength of 460mpa with a tensile strength ranging between 520mpa to 670mpa. The superior S460mc Steel Mechanical Properties allows these modules to be employed in pressure vessels and offshore applications in stress-induced environments. Apart from this, the versatile S460mc Steel Properties allow these modules to be readily elongated by a minimum of 17% in the system.

S460MC Hardness

this High yield strength grades designed with a superior hardness of Brinell 220 to 240 HBW.

Density of S460mc Steel

it is designed with a density of 7850 kg/m3.

Aircraft structures

Aerospace vehicle structures

Automobile industry

Weapons structural parts

Propeller components

Card wheel hub

S460mc is designed with a tensile strength of 745mpa with a yield strength of 470mpa. EN 10149-2 S460MC Plates are designed with a tensile strength of 600mpa with a strong yield strength ranging up to 460mpa. S460MC steel plate possesses lower strength in the system over the Ams 6359.

The EN 10149-2 Grade S460MC Plates possess a higher manganese content; however, the AMS 6359 grade exhibits superior carbon content while also showing the presence of chromium and molybdenum in their concentration.

EN 10149-2 S460MC Automobile structure steel plate is seen in frames in cars and other automobile systems. AMS 6359 grade is seen in aircraft landing gears and structural parts.

Request A Quote

If you want to learn more about GNEE's products, you can send an email to info@gneesteels.com. We are more than happy to assist you.