Oct 31, 2024 Leave a message

S500QL Steel Plate: Performance Characteristics and Uses

What Is S500QL Steel Plate?

S500QL is a high-performance quenched and tempered structural steel plate defined in EN 10025-6, the European standard for flat products of high yield strength structural steels in the quenched and tempered condition. In the designation: S means structural steel, 500 indicates a minimum yield strength of 500 MPa, Q denotes the quenched and tempered delivery condition, and L means impact toughness verified at low temperature, specifically at least 30 J at −40 °C.

Mechanical Properties

Commonly quoted mechanical values for S500QL are shown below. The exact values for each order depend on the thickness class and are confirmed on the mill test certificate.

Thickness (mm) Min. yield strength (MPa) Tensile strength (MPa) Impact energy
3 < t ≤ 50 500 590 – 770 30 J at −40 °C
50 < t ≤ 100 480 590 – 770 30 J at −40 °C
100 < t ≤ 150 440 540 – 720 30 J at −40 °C

The L designation is the key benefit of this grade for cold-region projects: the guaranteed −40 °C impact toughness keeps the structure safe and reliable even under extreme low-temperature service.

Processing Performance

Cold processing. S500QL can be cold bent and cold stamped, but the hardening tendency of the material should be considered: tooling radii, springback and the risk of edge cracking need attention in the process design.

Hot processing. The plate can be hot rolled and hot forged to obtain the required shape and size. Hot working temperatures must be controlled to avoid impairing the quenched and tempered properties.

Heat Treatment

S500QL is supplied in the quenched and tempered condition, which is the source of its high strength and toughness balance. Further heat treatment of finished components should be carried out only with a qualified procedure, because reheating can change the microstructure and the guaranteed properties.

Corrosion Resistance and Surface Protection

S500QL has a certain level of corrosion resistance as a low-alloy structural steel. In highly corrosive environments, the corrosion resistance can be further improved by surface treatment such as galvanising or painting. The selection of the protective system should follow the environmental corrosivity category of the site.

Typical Applications

Heavy machinery and equipment frames

Cranes, excavators and mining equipment

Bridges and large structural frameworks

Pressure-containing and low-temperature structural components where high strength-to-weight ratio is required

Frequently Asked Questions

What does the Q in S500QL mean?

Q means the steel is supplied in the quenched and tempered condition, per the EN 10025-6 designation system for high yield strength structural steels.

What does the L in S500QL mean?

L means low-temperature impact toughness is verified: at least 30 J at −40 °C for the QL grades of EN 10025-6.

What is the minimum yield strength of S500QL?

500 MPa for thicknesses up to 50 mm, 480 MPa for 50–100 mm and 440 MPa for 100–150 mm.

Can S500QL be cold formed?

Yes, it can be cold bent and cold stamped, but the hardening tendency must be considered in tooling design and bend radii.

Does S500QL need surface protection?

It has a certain level of corrosion resistance; in aggressive environments, galvanising or painting is recommended to extend service life.

Which standard governs S500QL?

EN 10025-6, the European standard for flat products of high yield strength structural steels in the quenched and tempered condition.

Send Inquiry

whatsapp

phone

Email

Inquiry