High-strength structural steel plates are critical for heavy-duty applications like construction, offshore engineering, and mining machinery. Among EN 10025-6 grades, S960Q, S960QL, and S960QL1 stand out for their 960MPa minimum yield strength, but their differences in low-temperature adaptability and performance make them suitable for distinct scenarios.
As a leading high-strength steel supplier, GNEE Steel provides professional insights into their core differences and selection guidelines to help you make optimal choices for your projects.
Overview of EN 10025-6 S960 Series High-Strength Steel
EN 10025-6 specifies the technical requirements for quenched and tempered high-strength structural steel plates. The S960 series belongs to the ultra-high-strength category, with a minimum yield strength of 960MPa and tensile strength ranging from 1050MPa to 1200MPa. These grades are designed for load-bearing structures requiring excellent toughness and weldability.
However, the suffixes "Q", "QL", and "QL1" indicate key variations in low-temperature performance- a critical factor for projects in cold regions (e.g., northern Europe, Canada, or high-altitude areas).

Core Differences: S960Q vs S960QL vs S960QL1
2.1 Low-Temperature Toughness Requirements
The most significant distinction lies in Charpy V-notch (CVN) impact test requirements, which measure a material's resistance to brittle fracture at low temperatures:
- S960Q: Standard grade for ambient and mild low-temperature environments. It requires a minimum CVN impact energy of 34J at -20°C. Suitable for applications where temperatures rarely drop below -20°C, such as general industrial structures in temperate zones.
- S960QL: Low-temperature grade (the "L" stands for "low temperature"). It demands a minimum CVN impact energy of 34J at -40°C. Engineered to maintain toughness in colder conditions, making it ideal for offshore platforms, bridge components, and machinery operating in cold climates.
- S960QL1: Enhanced low-temperature grade (the "L1" indicates improved low-temperature performance). It requires a minimum CVN impact energy of 34J at -60°C. Designed for extreme cold environments, such as Arctic offshore projects, polar research facilities, or mining equipment in sub-zero regions.

Chemical Composition Nuances
To achieve superior low-temperature toughness, S960QL and S960QL1 have slightly adjusted chemical compositions compared to S960Q:
- All grades contain carbon (C ≤ 0.20%), manganese (Mn ≤ 1.80%), and silicon (Si ≤ 0.60%).
- S960QL and S960QL1 have lower phosphorus (P ≤ 0.025%) and sulfur (S ≤ 0.010%) content than S960Q (P ≤ 0.030%, S ≤ 0.020%), reducing impurity-induced brittle fracture risks.
- Trace elements like niobium (Nb), vanadium (V), and titanium (Ti) are precisely controlled in QL and QL1 grades to refine grain structure, enhancing low-temperature toughness without compromising strength.
Weldability and Processing Adaptability
All three grades offer good weldability when using appropriate techniques (e.g., low-hydrogen electrodes). However, S960QL and S960QL1 require stricter pre-heating and post-weld heat treatment (PWHT) controls to preserve their low-temperature toughness. S960Q, with its simpler composition, has more flexible processing requirements, making it cost-effective for standard fabrication projects.
Low-Temperature Adaptability Selection Guide
Choosing the right grade depends on your project's operating temperature, load conditions, and environmental constraints:
- Temperature ≥ -20°C: S960Q is the optimal choice for cost-efficiency. It meets basic high-strength needs for structures like factory buildings, cranes, and general engineering machinery.
- -40°C ≤ Temperature < -20°C: S960QL is mandatory to avoid brittle fracture. Recommended for offshore wind turbines, cold-region bridges, and railway vehicles operating in northern regions.
- Temperature < -40°C: S960QL1 is the only reliable option. Essential for Arctic oil and gas pipelines, polar exploration equipment, and low-temperature storage tanks.

Why Choose GNEE Steel for S960 Series Plates?
GNEE Steel is a professional supplier of EN 10025-6 high-strength steel plates, with strict quality control aligned with international standards. Our S960Q, S960QL, and S960QL1 plates are produced via advanced quenching-tempering processes, ensuring consistent mechanical properties and low-temperature performance.
We offer:
- Customized thickness (6mm–150mm) and width options to fit your project needs.
- Complete quality certificates (EN 10204 3.1/3.2) for traceability.
- Professional technical support to help you select the right grade and optimize welding processes.
- Global delivery with competitive lead times.
Conclusion
S960Q, S960QL, and S960QL1 share ultra-high strength but differ drastically in low-temperature toughness. Selecting the correct grade is critical to ensure structural safety and durability- choosing an undergraded material (e.g., S960Q for -40°C applications) risks catastrophic brittle fracture, while overgrading (e.g., S960QL1 for temperate zones) increases costs unnecessarily.
For personalized recommendations on S960 series high-strength steel plates or to request a free quote, contact GNEE Steel today. Our team of experts will help you balance performance, safety, and cost for your specific project.
GNEE Steel also supplies a variety of high-strength steel plates, such as A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E, etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to info@gneesteels.com. You are welcome to consult us, and we are very willing to answer your questions.
| Grades Of Carbon and Low-alloy High-strength Steels Supplied By GNEE | |||||
| ASTM/ASME | ASTM A36/A36M | ASTM A36 | |||
| ASTM A283/A283M | ASTM A283 Grade A | ASTM A283 Grade B | ASTM A283 Grade C | ASTM A283 Grade D | |
| ASTM A514/A514M | ASTM A514 Grade A | ASTM A514 Grade B | ASTM A514 Grade C | ASTM A514 Grade E | |
| ASTM A514 Grade F | ASTM A514 Grade H | ASTM A514 Grade J | ASTM A514 Grade K | ||
| ASTM A514 Grade M | ASTM A514 Grade P | ASTM A514 Grade Q | ASTM A514 Grade R | ||
| ASTM A514 Grade S | ASTM A514 Grade T | ||||
| ASTM A572/A572M | ASTM A572 Grade 42 | ASTM A572 Grade 50 | ASTM A572 Grade 55 | ASTM A572 Grade 60 | |
| ASTM A572 Grade 65 | |||||
| ASTM A573/A573M | ASTM A573 Grade 58 | ASTM A573 Grade 65 | ASTM A573 Grade 70 | ||
| ASTM A588/A588M | ASTM A588 Grade A | ASTM A588 Grade B | ASTM A588 Grade C | ASTM A588 Grade K | |
| ASTM A633/A633M | ASTM A633 Grade A | ASTM A633 Grade C | ASTM A633 Grade D | ASTM A633 Grade E | |
| ASTM A656/A656M | ASTM A656 Grade 50 | ASTM A656 Grade 60 | ASTM A656 Grade 70 | ASTM A656 Grade 80 | |
| ASTM A709/A709M | ASTM A709 Grade 36 | ASTM A709 Grade 50 | ASTM A709 Grade 50S | ASTM A709 Grade 50W | |
| ASTM A709 Grade HPS 50W | ASTM A709 Grade HPS 70W | ASTM A709 Grade 100 | ASTM A709 Grade 100W | ||
| ASTM A709 Grade HPS 100W | |||||
| ASME SA36/SA36M | ASME SA36 | ||||
| ASME SA283/SA283M | ASME SA283 Grade A | ASME SA283 Grade B | ASME SA283 Grade C | ASME SA283 Grade D | |
| ASME SA514/SA514M | ASME SA514 Grade A | ASME SA514 Grade B | ASME SA514 Grade C | ASME SA514 Grade E | |
| ASME SA514 Grade F | ASME SA514 Grade H | ASME SA514 Grade J | ASME SA514 Grade K | ||
| ASME SA514 Grade M | ASME SA514 Grade P | ASME SA514 Grade Q | ASME SA514 Grade R | ||
| ASME SA514 Grade S | ASME SA514 Grade T | ||||
| ASME SA572/SA572M | ASME SA572 Grade 42 | ASME SA572 Grade 50 | ASME SA572 Grade 55 | ASME SA572 Grade 60 | |
| ASME SA572 Grade 65 | |||||
| ASME SA573/SA573M | ASME SA573 Grade 58 | ASME SA573 Grade 65 | ASME SA573 Grade 70 | ||
| ASME SA588/SA588M | ASME SA588 Grade A | ASME SA588 Grade B | ASME SA588 Grade C | ASME SA588 Grade K | |
| ASME SA633/SA633M | ASME SA633 Grade A | ASME SA633 Grade C | ASME SA633 Grade D | ASME SA633 Grade E | |
| ASME SA656/SA656M | ASME SA656 Grade 50 | ASME SA656 Grade 60 | ASME SA656 Grade 70 | ASME SA656 Grade 80 | |
| ASME SA709/SA709M | ASME SA709 Grade 36 | ASME SA709 Grade 50 | ASME SA709 Grade 50S | ASME SA709 Grade 50W | |
| ASME SA709 Grade HPS 50W | ASME SA709 Grade HPS 70W | ASME SA709 Grade 100 | ASME SA709 Grade 100W | ||
| ASME SA709 Grade HPS 100W | |||||
| EN10025 | EN10025-2 | EN10025-2 S235J0 | EN10025-2 S275J0 | EN10025-2 S355J0 | EN10025-2 S355K2 |
| EN10025-2 S235JR | EN10025-2 S275JR | EN10025-2 S355JR | EN10025-2 S420J0 | ||
| EN10025-2 S235J2 | EN10025-2 S275J2 | EN10025-2 S355J2 | |||
| EN10025-3 | EN10025-3 S275N | EN10025-3 S355N | EN10025-3 S420N | EN10025-3 S460N | |
| EN10025-3 S275NL | EN10025-3 S355NL | EN10025-3 S420NL | EN10025-3 S460NL | ||
| EN10025-4 | EN10025-4 S275M | EN10025-4 S355M | EN10025-4 S420M | EN10025-4 S460M | |
| EN10025-4 S275ML | EN10025-4 S355ML | EN10025-4 S420ML | EN10025-4 S460ML | ||
| EN10025-6 | EN10025-6 S460Q | EN10025-6 S460QL | EN10025-6 S460QL1 | EN10025-6 S500Q | |
| EN10025-6 S500QL | EN10025-6 S500QL1 | EN10025-6 S550Q | EN10025-6 S550QL | ||
| EN10025-6 S550QL1 | EN10025-6 S620Q | EN10025-6 S620QL | EN10025-6 S620QL1 | ||
| EN10025-6 S690Q | EN10025-6 S690QL | EN10025-6 S690Q1 | EN10025-6 S890Q | ||
| EN10025-6 S890QL | EN10025-6 S890QL1 | EN10025-6 S960Q | EN10025-6 S960QL | ||
| EN 10149 | EN 10149-2 | S315MC | S355MC | S420MC | S460MC |
| S500MC | S550MC | S600MC | S650MC | ||
| S700MC | S900MC | S960MC | |||
| JIS | JIS G3101 | JIS G3101 SS330 | JIS G3101 SS400 | JIS G3101 SS490 | JIS G3101 SS540 |
| JIS G3106 | JIS G3106 SM400A | JIS G3106 SM400B | JIS G3106 SM400C | JIS G3106 SM490A | |
| JIS G3106 SM490YA | JIS G3106 SM490B | JIS G3106 SM490YB | JIS G3106 SM490C | ||
| JIS G3106 SM520B | JIS G3106 SM520C | JIS G3106 SM570 | |||
| DIN | DIN 17100 | DIN17100 St52-3 | DIN17100 St37-2 | DIN17100 St37-3 | DIN17100 RSt37-2 |
| DIN17100 USt37-2 | |||||
| DIN 17102 | DIN17102 StE315 | DIN17102 EStE315 | DIN17102 TStE315 | DIN17102 WStE315 | |
| DIN17102 StE355 | DIN17102 EStE355 | DIN17102 TStE355 | DIN17102 WStE355 | ||
| DIN17102 StE380 | DIN17102 EStE380 | DIN17102 TStE380 | DIN17102 WStE380 | ||
| DIN17102 StE420 | DIN17102 EStE420 | DIN17102 TStE420 | DIN17102 WStE420 | ||
| DIN17102 StE460 | DIN17102 EStE460 | DIN17102 TStE460 | DIN17102 WStE460 | ||
| DIN17102 StE500 | DIN17102 EStE500 | DIN17102 TStE500 | DIN17102 WStE500 | ||
| DIN17102 EStE285 | |||||
| GB | GB/T700 | GB/T700 Q235A | GB/T700 Q235B | GB/T700 Q235C | GB/T700 Q235D |
| GB/T700 Q275 | |||||
| GB/T1591 | GB/T1591 Q345A | GB/T1591 Q390A | GB/T1591 Q420A | GB/T1591 Q420E | |
| GB/T1591 Q345B | GB/T1591 Q390B | GB/T1591 Q420B | GB/T1591 Q460C | ||
| GB/T1591 Q345C | GB/T1591 Q390C | GB/T1591 Q420C | GB/T1591 Q460D | ||
| GB/T1591 Q345D | GB/T1591 Q390D | GB/T1591 Q420D | GB/T1591 Q460E | ||
| GB/T1591 Q345E | GB/T1591 Q390E | ||||
| GB/T16270 | GB/T16270 Q550C | GB/T16270 Q550D | GB/T16270 Q550E | GB/T16270 Q550F | |
| GB/T16270 Q620C | GB/T16270 Q620D | GB/T16270 Q620E | GB/T16270 Q620F | ||
| GB/T16270 Q690C | GB/T16270 Q690D | GB/T16270 Q690E | GB/T16270 Q690F | ||
| GB/T16270 Q800C | GB/T16270 Q800D | GB/T16270 Q800E | GB/T16270 Q800F | ||
| GB/T16270 Q890C | GB/T16270 Q890D | GB/T16270 Q890E | GB/T16270 Q890F | ||
| GB/T16270 Q960C | GB/T16270 Q960D | GB/T16270 Q960E | GB/T16270 Q960F | ||
| GB/T16270 Q500 | |||||




