Jul 25, 2025 Leave a message

SPA-C Weather Resistant Steel Plate and Coil Guide

1. What Is SPA-C Weather Resistant Steel?

SPA-C is an atmospheric corrosion resisting structural steel specified in JIS G3125: Hot-rolled atmospheric corrosion resisting steels for traffic, containers and similar applications. It belongs to the family of low-alloy high-strength structural steels and is divided in the market by intended use: higher-weather-resistance structural steels, such as the SPA series, and weathering steels for welded structures, such as the SMA series of JIS G3114. SPA-C is commonly produced as hot-rolled plate and coil and is selected for bolted, riveted and welded structural parts of vehicles, containers, buildings and towers, where the steel can remain uncoated in atmospheric exposure.

2. SPA-C Chemical Composition (JIS G3125)

The composition limits below follow JIS G3125. Copper, chromium and phosphorus are the elements that give the grade its corrosion resistance.

Element Limit (max %, unless shown as a range)
C 0.12
Si 0.20–0.75
Mn 0.20–0.60
P 0.070–0.150
S 0.035
Cu 0.25–0.55
Cr 0.30–1.25
Ni 0.65

3. Mechanical Properties of SPA-C

SPA-C is a forming-grade weathering steel with lower strength than the SPA-H grade. Representative values per JIS G3125 are a minimum yield strength of 315 MPa for thicknesses up to 16 mm and a tensile range of 450–600 MPa; strength values decrease gradually with thicker material. Because of its good formability, the grade is widely used for cold-formed sections and panels in addition to flat plate and coil.

4. Plate and Coil Forms, Surface and Sizes

SPA-C is supplied as weather resistant steel plates and coils. Plates are commonly available in thicknesses from 2 mm to 100 mm, with widths such as 1000–3000 mm, 1250 mm, 1500 mm and 2000 mm, and length or coil dimensions to customer request. The surface is delivered in black (as-rolled, with mill scale) or shot-blasted/silver finish depending on the intended application. For structural use with welding, the same JIS G3125 quality requirements apply as for thinner sheet, and the welding performance of the grade is considered good for arc welding processes.

5. Typical Applications

SPA-C is used for vehicles, containers, buildings, towers and other structures assembled with bolting, riveting and welding. Because the steel develops a protective patina in outdoor service, it is a common choice for shipping containers, rail cars, agricultural machinery bodies, architectural cladding and structural framing where the designer wants to avoid recurring painting cost. Regular inspection and cleaning are still recommended to keep the rust layer dense and stable.

FAQ

Q: What is the difference between SPA-C and SPA-H?

A: Both are weathering steels under JIS G3125 with the same composition limits. SPA-H is the higher-strength grade (minimum yield 355 MPa at 16 mm and below, tensile 490–610 MPa), while SPA-C offers lower strength (315 MPa) with better formability for cold forming and container applications.

Q: Does SPA-C need protective paint?

A: The grade is designed for uncoated use in atmospheric environments. No protective coating is required where regular wet-dry cycling allows the patina to form; painting may still be used where aesthetics or aggressive chloride exposure demand it.

Q: Can SPA-C be welded?

A: Yes. SPA-C can be welded with standard arc welding processes using low-hydrogen or weathering-steel-compatible consumables, following a qualified welding procedure specification.

Q: In which forms is SPA-C supplied?

A: SPA-C is supplied as hot-rolled plate, coil, sheet and strip. It can also be cold-formed into profiles and panels for structural and cladding applications.

Q: What surface finish is available?

A: The steel is delivered with a black as-rolled surface with mill scale, or in a shot-blasted and painted or silver finish, depending on the customer requirement.

Q: What thickness range is typical for SPA-C plate?

A: Plates are typically available from 2 mm to 100 mm thick, with widths from 1000 mm to 3000 mm and standard widths such as 1250 mm, 1500 mm and 2000 mm.

Send Inquiry

whatsapp

phone

Email

Inquiry