S690Q – structural high-strength steel with minimum yield strength of 690 MPa supplied in quenched and tempered condition (Q). Plates of S690 steel grade comply with EN 10025-6 standard. It is typically used in structures bearing extreme loads – in the production of mining and heavy construction equipment, crane facilities, offshore drilling rigs and supports for offshore wind mills as well as in the construction of bridges and trestles.
EN 10025-2 S690Q Sheet and Plates Specification
Available dimensions
Plates of S690 steel grade are available with thicknesses of 8-100 mm for Q and QL quality groups and with thicknesses of 8-50 mm for QL1 quality group. Available width of plates is up to 3200 mm, length – up to 12200 mm. With the plate thickness of 100 mm and plate width of 1600 mm, the maximum length is 7500 mm*. Plates with thickness up to 50 mm are supplied with edges trimmed, with thickness of 51 to 100 mm – with the edge flame cut.
| Item | Quenched And Tempered Structural Steel Plate |
|---|---|
| Material | QUARD, SUMIHARD, BRINAR, DUROSTAT, DILLIDUR, JFE EVERHARD |
| Thickness | 3 – 200mm |
| Width | 500 – 3000mm |
| Length | 1000 – 12000mm |
| Heat Treatment | N, Q+T |
| Surface Paint | EP, PE, HDP, SMP, PVDF |
Characteristics of S690Q-brand steel

S690Q is a hot-rolled hardened structural steel that has undergone subsequent tempering treatment and conforms to the EN 10025-6, DSTU EN 10025-6 standard.
Standard: Hot-rolled product made from structural steel. EN 10025-6: Technical delivery conditions for high-tensile structural steel post-tempering and quenching.
Classification: High-grade structural steel.
Product:Fine-grain steel post-quenching and tempering.
Chemical composition of S690Q steel according EN 10025-6, %
|
С |
Si |
Mn |
P |
S |
N |
B |
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
Zr |
|
0,20 |
0,80 |
1,70 |
0,025 |
0,015 |
0,015 |
0,005 |
1,50 |
0,50 |
0,70 |
0,06 |
2,0 |
0,05 |
0,12 |
0,15 |
Mechanical properties of S690Q steel
|
Nominal gauge, mm |
Minimum yield strength, ReH (MPa) |
Ultimate tensile strength, Rm (MPa) |
Minimum elongation ratio σ, % |
Brinell hardness number, HB (MPa) |
|
> 3 ≤ 50 |
690 |
770-940 |
14 |
228-278 |
|
> 50 ≤ 100 |
650 |
760-930 |
14 |
225-276 |
|
> 100 ≤ 150 |
630 |
710-900 |
14 |
210-266 |
Analogues to S690Q steel
| Standard | ASTM | DIN, WNr | JIS | AFNOR | ISO 4952 |
| EN 10025-2:2004 | A709-100 | TStE690V DILLIMAX 690 NAXTRA 70 | JFE HITEN 780LE | E690T E690TFP S690T | E690 |
Application
S690Q steel is used in structures subject to extreme loads: mining and heavy-construction equipment, crane equipment, offshore drilling platforms, supporting structures for wind turbines, bridges and trestles.
Welding
S690Q fine grain structural steel plate is suited to welding done without preheating or subsequent heat treatment. It is organically weldable as its behaviour during and after welding depends not only on the material, but also on the sizes and shapes as well as the product operation conditions. The requirements for arc-welding must conform to the EN 1011-2 standard
As the product gauge and strength increase, cold-cracking may occur, caused by the following:
Large quantities of diffusing hydrogen in the weld-seam metal;
Significant tension-stress concentrations at the weld seam.
Fragile structure of the heat-affected zone;
If you want to learn more about GNEE's products, you can send an email to info@gneesteels.com. We are more than happy to assist you.
FAQ
Q: What is the difference between S690QL and S690Q?
A: S690Q: Minimum impact toughness tested at -20°C (30J average). → Typical Use: Cranes in temperate climates, quarry equipment. S690QL: Certified for -40°C and below (≥40J impact toughness). → Critical Use: Arctic pipelines, offshore platforms, mining vehicles in Siberia.
Q: What is S690 grade steel?
A: S690 high yield & fine grain steel plate is a high strength, quenched and tempered fine-grain structural steel. Structural steel S690 is used in structures that must withstand very heavy loads. This grade is meant for structures where weight savings is important.
Q: What is S690QL material?
A: S690QL is a high strength quenched and tempered steel grade that complies to steel specification EN 10025. The designation S690QL refers to a minimum yield strength of 690 MPa.
Q: What is S690 steel?
A: S690 high yield & fine grain steel plate is a high strength, quenched and tempered fine-grain structural steel. Structural steel S690 is used in structures that must withstand very heavy loads. This grade is meant for structures where weight savings is important.
Q: What is the equivalent of S690 steel?
A: Equivalent grades to S690QL steel include ASTM A709-100 (USA), E690T and S690T (France), TStE690V and DILLIMAX 690 (Germany), WELDOX 700 (Sweden), and E690 (ISO). These equivalents are specific to different regional standards and manufacturers, but they all share similar high-strength, quenched and tempered properties.
Q: What material group is S690?
A: S690 QL is a high yield structural steel grade produced in compliance with EN 10025:6:2004. The material is heat treated using the quench and temper process and has good bending and welding properties.
| Grades Of Carbon and Low-alloy High-strength Steels Supplied By GNEE | |||||
| ASTM/ASME | ASTM A36/A36M | ASTM A36 | |||
| ASTM A283/A283M | ASTM A283 Grade A | ASTM A283 Grade B | ASTM A283 Grade C | ASTM A283 Grade D | |
| ASTM A514/A514M | ASTM A514 Grade A | ASTM A514 Grade B | ASTM A514 Grade C | ASTM A514 Grade E | |
| ASTM A514 Grade F | ASTM A514 Grade H | ASTM A514 Grade J | ASTM A514 Grade K | ||
| ASTM A514 Grade M | ASTM A514 Grade P | ASTM A514 Grade Q | ASTM A514 Grade R | ||
| ASTM A514 Grade S | ASTM A514 Grade T | ||||
| ASTM A572/A572M | ASTM A572 Grade 42 | ASTM A572 Grade 50 | ASTM A572 Grade 55 | ASTM A572 Grade 60 | |
| ASTM A572 Grade 65 | |||||
| ASTM A573/A573M | ASTM A573 Grade 58 | ASTM A573 Grade 65 | ASTM A573 Grade 70 | ||
| ASTM A588/A588M | ASTM A588 Grade A | ASTM A588 Grade B | ASTM A588 Grade C | ASTM A588 Grade K | |
| ASTM A633/A633M | ASTM A633 Grade A | ASTM A633 Grade C | ASTM A633 Grade D | ASTM A633 Grade E | |
| ASTM A656/A656M | ASTM A656 Grade 50 | ASTM A656 Grade 60 | ASTM A656 Grade 70 | ASTM A656 Grade 80 | |
| ASTM A709/A709M | ASTM A709 Grade 36 | ASTM A709 Grade 50 | ASTM A709 Grade 50S | ASTM A709 Grade 50W | |
| ASTM A709 Grade HPS 50W | ASTM A709 Grade HPS 70W | ASTM A709 Grade 100 | ASTM A709 Grade 100W | ||
| ASTM A709 Grade HPS 100W | |||||
| ASME SA36/SA36M | ASME SA36 | ||||
| ASME SA283/SA283M | ASME SA283 Grade A | ASME SA283 Grade B | ASME SA283 Grade C | ASME SA283 Grade D | |
| ASME SA514/SA514M | ASME SA514 Grade A | ASME SA514 Grade B | ASME SA514 Grade C | ASME SA514 Grade E | |
| ASME SA514 Grade F | ASME SA514 Grade H | ASME SA514 Grade J | ASME SA514 Grade K | ||
| ASME SA514 Grade M | ASME SA514 Grade P | ASME SA514 Grade Q | ASME SA514 Grade R | ||
| ASME SA514 Grade S | ASME SA514 Grade T | ||||
| ASME SA572/SA572M | ASME SA572 Grade 42 | ASME SA572 Grade 50 | ASME SA572 Grade 55 | ASME SA572 Grade 60 | |
| ASME SA572 Grade 65 | |||||
| ASME SA573/SA573M | ASME SA573 Grade 58 | ASME SA573 Grade 65 | ASME SA573 Grade 70 | ||
| ASME SA588/SA588M | ASME SA588 Grade A | ASME SA588 Grade B | ASME SA588 Grade C | ASME SA588 Grade K | |
| ASME SA633/SA633M | ASME SA633 Grade A | ASME SA633 Grade C | ASME SA633 Grade D | ASME SA633 Grade E | |
| ASME SA656/SA656M | ASME SA656 Grade 50 | ASME SA656 Grade 60 | ASME SA656 Grade 70 | ASME SA656 Grade 80 | |
| ASME SA709/SA709M | ASME SA709 Grade 36 | ASME SA709 Grade 50 | ASME SA709 Grade 50S | ASME SA709 Grade 50W | |
| ASME SA709 Grade HPS 50W | ASME SA709 Grade HPS 70W | ASME SA709 Grade 100 | ASME SA709 Grade 100W | ||
| ASME SA709 Grade HPS 100W | |||||
| EN10025 | EN10025-2 | EN10025-2 S235J0 | EN10025-2 S275J0 | EN10025-2 S355J0 | EN10025-2 S355K2 |
| EN10025-2 S235JR | EN10025-2 S275JR | EN10025-2 S355JR | EN10025-2 S420J0 | ||
| EN10025-2 S235J2 | EN10025-2 S275J2 | EN10025-2 S355J2 | |||
| EN10025-3 | EN10025-3 S275N | EN10025-3 S355N | EN10025-3 S420N | EN10025-3 S460N | |
| EN10025-3 S275NL | EN10025-3 S355NL | EN10025-3 S420NL | EN10025-3 S460NL | ||
| EN10025-4 | EN10025-4 S275M | EN10025-4 S355M | EN10025-4 S420M | EN10025-4 S460M | |
| EN10025-4 S275ML | EN10025-4 S355ML | EN10025-4 S420ML | EN10025-4 S460ML | ||
| EN10025-6 | EN10025-6 S460Q | EN10025-6 S460QL | EN10025-6 S460QL1 | EN10025-6 S500Q | |
| EN10025-6 S500QL | EN10025-6 S500QL1 | EN10025-6 S550Q | EN10025-6 S550QL | ||
| EN10025-6 S550QL1 | EN10025-6 S620Q | EN10025-6 S620QL | EN10025-6 S620QL1 | ||
| EN10025-6 S690Q | EN10025-6 S690QL | EN10025-6 S690Q1 | EN10025-6 S890Q | ||
| EN10025-6 S890QL | EN10025-6 S890QL1 | EN10025-6 S960Q | EN10025-6 S960QL | ||
| EN 10149 | EN 10149-2 | S315MC | S355MC | S420MC | S460MC |
| S500MC | S550MC | S600MC | S650MC | ||
| S700MC | S900MC | S960MC | |||
| JIS | JIS G3101 | JIS G3101 SS330 | JIS G3101 SS400 | JIS G3101 SS490 | JIS G3101 SS540 |
| JIS G3106 | JIS G3106 SM400A | JIS G3106 SM400B | JIS G3106 SM400C | JIS G3106 SM490A | |
| JIS G3106 SM490YA | JIS G3106 SM490B | JIS G3106 SM490YB | JIS G3106 SM490C | ||
| JIS G3106 SM520B | JIS G3106 SM520C | JIS G3106 SM570 | |||
| DIN | DIN 17100 | DIN17100 St52-3 | DIN17100 St37-2 | DIN17100 St37-3 | DIN17100 RSt37-2 |
| DIN17100 USt37-2 | |||||
| DIN 17102 | DIN17102 StE315 | DIN17102 EStE315 | DIN17102 TStE315 | DIN17102 WStE315 | |
| DIN17102 StE355 | DIN17102 EStE355 | DIN17102 TStE355 | DIN17102 WStE355 | ||
| DIN17102 StE380 | DIN17102 EStE380 | DIN17102 TStE380 | DIN17102 WStE380 | ||
| DIN17102 StE420 | DIN17102 EStE420 | DIN17102 TStE420 | DIN17102 WStE420 | ||
| DIN17102 StE460 | DIN17102 EStE460 | DIN17102 TStE460 | DIN17102 WStE460 | ||
| DIN17102 StE500 | DIN17102 EStE500 | DIN17102 TStE500 | DIN17102 WStE500 | ||
| DIN17102 EStE285 | |||||
| GB | GB/T700 | GB/T700 Q235A | GB/T700 Q235B | GB/T700 Q235C | GB/T700 Q235D |
| GB/T700 Q275 | |||||
| GB/T1591 | GB/T1591 Q345A | GB/T1591 Q390A | GB/T1591 Q420A | GB/T1591 Q420E | |
| GB/T1591 Q345B | GB/T1591 Q390B | GB/T1591 Q420B | GB/T1591 Q460C | ||
| GB/T1591 Q345C | GB/T1591 Q390C | GB/T1591 Q420C | GB/T1591 Q460D | ||
| GB/T1591 Q345D | GB/T1591 Q390D | GB/T1591 Q420D | GB/T1591 Q460E | ||
| GB/T1591 Q345E | GB/T1591 Q390E | ||||
| GB/T16270 | GB/T16270 Q550C | GB/T16270 Q550D | GB/T16270 Q550E | GB/T16270 Q550F | |
| GB/T16270 Q620C | GB/T16270 Q620D | GB/T16270 Q620E | GB/T16270 Q620F | ||
| GB/T16270 Q690C | GB/T16270 Q690D | GB/T16270 Q690E | GB/T16270 Q690F | ||
| GB/T16270 Q800C | GB/T16270 Q800D | GB/T16270 Q800E | GB/T16270 Q800F | ||
| GB/T16270 Q890C | GB/T16270 Q890D | GB/T16270 Q890E | GB/T16270 Q890F | ||
| GB/T16270 Q960C | GB/T16270 Q960D | GB/T16270 Q960E | GB/T16270 Q960F | ||
| GB/T16270 Q500 | |||||




