Both S355JR and S355J2+N belong to the European standard structural steel series (EN 10025-2), with the same basic yield strength grade (≥355MPa for thickness ≤16mm). However, they differ significantly in impact toughness requirements, delivery conditions, and application scenarios due to variations in heat treatment and quality grades.
Types of steel and properties
Steel is one of the most widespread and used materials and prompted the industrial revolution. Increasingly technological and advanced production techniques have led to a wide range of uses and with aesthetically and architecturally high quality and very beautiful results. Over a billion tons of steel are produced every year. The alloy is obtained through the refining process of cast iron or by melting iron in blast furnaces.
Following this production, the steel is ready to be subjected to other types of processing such as rolling, forging, drawing and heat treatment.
A number of European-defined standards have decided on the classification, according to the composition, of the different types of steel. These are divided into two main groups. The first includes basic and quality steels, the most common, used and cheaper ones, while the second includes special steels.
The steel of the first group is also known as construction steel, has lower mechanical characteristics than special steels but are still very suitable for resisting static stresses. They are used when they are still in the raw rolling state and their processing and installation takes place by welding. The percentage of carbon in these alloys must therefore not exceed the level of 0.41%.

The types of steel in question, S355JR and J2+N, both fall into the first group and more particularly into the category of so-called structural steel. In other words it is used as a material for the civil construction of metal structures as a load-bearing element or in works made of reinforced concrete.
The specific sector of use essentially depends on its characteristics, on the fragility and ductility and on the durability and mechanical resistance of the material.
Europe has thus decided that an acronym defines the set of peculiarities of structural steel, with the first character indicating its use. In this case, the letter S indicates that steel is used for metal carpentry.
The second part of the acronym, the number 355, indicates the minimum yield stress level, the latter assigning steel an idea of its ductility, meaning the ability to resist deformation. When this limit is exceeded, the steel passes from a reversible elastic behaviour, that is, it returns to its original condition, to a plastic one that presents irreversible deformations and the material assumes the condition of yield, even when the cause of the stress ceases its activity. This is a very important datum because it indicates the degree of resistance to a stress that the structure or product made with that particular type of steel can endure. Not only that, it is also important whether the steel will subsequently be subjected to further processing such as rolling or forging.
Differences between S355JR and S355J2+N steel
The second part of the abbreviation of this particular type of structural steel indicates the resilience value. Resilience indicates the quantity of energy that is absorbed by the alloy during an elastic deformation process. In other words, a material is able to absorb energy and in doing so resists external dynamic forces that instead push the steel to break.
S355JR steel has a minimum impact strength of 27 J under 20-degree temperature conditions while the second type of steel, S355J2+N has the same impact strength but with a temperature of -20 degrees. Instead the N indicates that the steel has undergone the normalisation process, a heat treatment by which the crystalline grain of the steel is refined and made more uniform, increasing the strength of the material and moving the ductile-brittle transition.
Key Summary of Differences
Impact Performance (Critical Distinction):
S355JR: Room-temperature impact (+20℃, 27J) – suitable for ambient-temperature environments.
S355J2+N: Low-temperature impact (-20℃, 47J) – ideal for cold regions or low-temperature working conditions.
Heat Treatment:
S355JR: No mandatory normalization; delivery as hot-rolled or controlled-rolled.
S355J2+N: Mandatory normalization (+N) – ensures uniform grain structure and stable toughness.
Application Selection:
Choose S355JR for cost-sensitive, general structural projects (e.g., building frames, common brackets) with no low-temperature requirements.
Choose S355J2+N for high-reliability scenarios (e.g., industrial equipment, offshore structures, low-temperature industrial heat exchangers) where welding performance and low-temperature resistance are critical.
GNEE Steel also supplies a variety of high-strength steel plates, such as A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E, etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to info@gneesteels.com. You are welcome to consult us, and we are very willing to answer your questions.
FAQ
What is S355JR equivalent to?
S355JR equivalent grades have very close chemical composition and mechanical properties to that of S355JR steel. Both the S355JR equivalent grades Q345B, A572 Gr 50, ST52-3, SM490B and S355JR steel are main products of BBN steel.
What is structural steel grade S355JR?
S355JR steel has a high strength-to-weight ratio, making it suitable for use in load-bearing structures such as bridges, buildings, and offshore structures. It has a minimum yield strength of 355 N/mm², making it one of the strongest steel grades available.
What is the difference between S355JR and J2?
In S355JR and S355J2 steel, JR and J2 indicates the steel needs to do +20℃ impact test and -20℃ impact test respectively. The different impact temperature is the main difference between S355JR and S355J2 steel. S355J2 steel can better adapt to low temperature work condition than S355JR steel.
What does JR mean in steel?
The J means that the test was conducted with 27 joules of energy. This is followed by either an R for room temperature, or a number referring to the temperature the tests were conducted at. So JR is room temperature (plus 20 degrees) J0 is 0 degrees and J2 is -20 degrees.
Is S355 better than S275?
This grade of steel is stronger than its S275 counterpart with a minimum yield strength of 355 N/mm2 resulting in its S355 name. This grade is also available in plate, round bar, flat bar, and is even available in blocks.
What is the hardness of S355 jr?
Grade S355JR has a minimum yield strength of 355 MPa. The impact energy at a room temperature of 20°C is at least 27 joules.
What is S355 steel used for?
This structural steel is used in shipbuilding and railway vehicle construction. S355 steel also finds optimal application for the construction of machinery such as cranes and excavators, as well as in building and piping construction, ventilation systems and pumps.
What is the price of S355JR per kg?
Mild Steel, Grade: S355JR – 0.61 USD/kg | 610 USD/ton
What is the difference between S275JR and S355JR?
S275JR is carbon steel, while S355JR is low alloy steel. Both carbon steel S275JR and S355JR low alloy steel are under EN10025-2 standard. The S355JR low alloy steel is higher steel grade than carbon steel S275JR.
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Clad steel plate | P265GH+410,S355JR+410,A516Gr70+316, A537CL1+304L,Q235B+304L,Q345B+304, A516Gr70(NACE)+410,A537CL1+904L, A537CL1+316L,A516Gr70+304L,A537CL1+304 ,A516Gr70+410,A516Gr70+904L |
2-300mm(Based plate),1-50mm(Composited plate) | / | UT, AR, TMCP.Normalized, Quenched and Tempered,Z Direction Test, Charpy V-Notch impact TestThe Third Party Test , Coated or Shot Blasting and Painting. |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |




