Dec 03, 2025 Leave a message

What are common applications of SA514 Grade P?

What is SA514 Grade P?

SA514 Grade P is a high-strength, quenched-and-tempered alloy steel designed for extreme structural, impact-critical, and abrasion-resistant applications. It provides the highest yield and tensile strength in the SA514 series while maintaining excellent weldability, ductility, and toughness. It is commonly used in heavy machinery frames, crane booms, trailers, mining equipment, and high-stress structural components.


1. Chemical Composition (typical ranges, wt.%)

Element Typical Range (wt.%)
Carbon (C) 0.15–0.26
Manganese (Mn) 0.80–1.25
Silicon (Si) 0.20–0.40
Nickel (Ni) 0.70–1.25
Chromium (Cr) 0.40–0.75
Molybdenum (Mo) 0.45–0.65
Vanadium (V) 0.03–0.08
Copper (Cu) 0.15–0.50
Phosphorus (P) & Sulfur (S) ≤ 0.035

Observation: Grade P has slightly higher carbon, manganese, and nickel content than Grade M, enhancing strength, hardness, and toughness.


2. Mechanical Properties

Property SA514 Grade P
Minimum Yield Strength 135 ksi (≈ 930 MPa)
Tensile Strength 140–160 ksi (≈ 965–1100 MPa)
Elongation 13–15%
Charpy V-Notch Toughness 25–40 ft-lb (34–54 J)
Brinell Hardness (HBW) 320–370
Modulus of Elasticity ≈ 200 GPa
Density ~7.85 g/cm³

info-372-371

What are the advantages of using SA514 Grade P?

The main advantages of using SA514 Grade P include:

Highest Strength in SA514 Series:

Yield strength: 135 ksi (≈ 930 MPa)

Tensile strength: 140–160 ksi (≈ 965–1100 MPa)
Provides maximum load-bearing capacity for extreme applications.

Excellent Toughness:

Charpy V-notch impact: 25–40 ft-lb (34–54 J)
Maintains ductility and fracture resistance even under high stress or low temperatures.

High Hardness and Wear Resistance:

Brinell hardness: 320–370 HBW
Ideal for abrasion-prone components and heavy-duty machinery.

Good Weldability and Formability:

Despite high strength, SA514 Grade P can be welded with standard procedures using low-hydrogen consumables.

Extreme Impact and Load Resistance:

Suitable for crane booms, heavy machinery frames, trailers, mining equipment, and structural plates under severe dynamic loads.

Summary: Grade P combines maximum strength, toughness, and durability, making it the preferred choice for extreme stress, impact-critical, and abrasion-resistant applications.

info-440-384

What standards or certifications cover SA514 Grade P?

SA514 Grade P is covered under the ASTM A514 / A514M standard, which specifies high-strength, quenched-and-tempered alloy steel plates for structural and pressure-bearing applications. Key points include:

ASTM A514 / A514M:

Defines chemical composition, mechanical properties (yield, tensile strength, elongation), hardness, and impact requirements.

Applies to plates intended for welded, bolted, or riveted structures.

Certification Requirements:

Mill test reports (MTR) verifying chemical composition and mechanical properties.

Heat treatment verification (quenched and tempered).

Charpy V-notch impact testing at specified temperatures, often 0°F (−18°C) or lower for critical applications.

At GNEE, we offer high-quality steel products, tailored to meet your specific construction needs. With competitive prices, reliable service, and timely delivery, we are confident in providing solutions that will enhance your projects. We invite you to partner with us for all your steel supply requirements!

Send Inquiry

whatsapp

phone

Email

Inquiry