Jan 13, 2026 Leave a message

SA387-Gr11-CL2-QUALITY-CERTIFICATE.pdf

What are common testing requirements for ASME SA387 Grade 11 Class 2 ?

What are common testing requirements for ASME SA387 Grade 11 Class 2 ?

A pressure vessel grade steel for use in elevated temperature service, ASME SA387 Grade 11 Class 2 is used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where liquids and gases are often stored at higher temperatures. The higher levels of chromium also provide excellent corrosion and oxidation resistance, which is a must in sour gas applications.

ASME SA387 Grade 11 Class 2

ASME SA387 Grade 11 Class 2 (ASTM A387 Grade 11 CL2) is a specification for chromium-molybdenum alloy steel plates intended for use in elevated temperature applications, commonly associated with pressure vessels and heat exchangers. Nominal chrome content at 1.00% to 1.50%, and Moly 0.45% to 0.65% for SA387 GRADE 11 material.

 

ASME SA387 Grade 11 Class 2 is a chromium-molybdenum alloy steel plate used for high-temperature, high-pressure applications like boilers and pressure vessels, particularly in oil, gas, and petrochemical industries, offering excellent strength, hardness, and oxidation resistance due to its ~1.25% Chromium and ~0.50% Molybdenum content. Class 2 signifies higher strength (tensile 515-690 MPa) and yield (310 MPa min) compared to Class 1, achieved through specific heat treatment, making it suitable for demanding service where superior load-bearing and high-temperature performance are critical.

 

Key Characteristics:

Material Type: Chromium-Molybdenum (Cr-Mo) Alloy Steel.

Application: Elevated temperature service in welded boilers, pressure vessels, heat exchangers.

Industry Use: Oil & Gas, Petrochemical, Power Generation.

 

Composition (Nominal):

Chromium (Cr): ~1.00% - 1.50%.

Molybdenum (Mo): ~0.45% - 0.65%.

info-1-1

What is ASME SA387 Grade 11 Class 2 material?

ASME SA387 Grade 11 Class 2 is a chromium-molybdenum alloy steel plate designed for elevated temperature service in welded boilers and pressure vessels, offering excellent high-temperature strength and corrosion resistance due to its ~1.25% Chromium and ~0.5% Molybdenum content, with "Class 2" indicating higher tensile strength achieved through quenching and tempering. This material is vital for the oil, gas, and petrochemical industries for storing and processing hot liquids and gases.

What are common testing requirements for ASME SA387 Grade 11 Class 2 ?

Common testing for ASME SA387 Grade 11 Class 2 includes mechanical tests like tensile (75-100 ksi, min 310 MPa yield, 18-22% elongation) and impact (Charpy V-notch), chemical analysis (Cr-Mo alloy), and NDT (Ultrasonic) to ensure proper heat treatment and performance for high-temperature pressure vessels, all verified with a material test report (MTR).

What precautions should be taken when welding ASME SA387 Grade 11 Class 2 ?

When welding ASME SA387 Grade 11 Class 2, key precautions include essential preheating (around 149°C/300°F) to prevent cracking, using appropriate low-hydrogen filler metals, maintaining controlled interpass temperatures, controlling weld restraint, and performing post-weld heat treatment (PWHT) within the specified range (690±14°C or ~1275°F) for optimal properties, all while following ASME code and ensuring proper PPE and ventilation for general safety.

 

Equivalents

BS EN ASTM/ASME DIN
621 B ––– SA387-11-2 –––

 

ASME SA387 GR 11 CLASS 2 Plate Specification

Property Specification
Grade ASTM A387 Gr 11 CL.2 Alloy Steel Plates
Standard ASTM A387 / ASME SA387
Width 1000mm - 4500mm
Thickness 5mm - 150mm
Length 3000mm - 18000mm
Impact Tested -52° C

 

Chromium & Molybdenum content (according to the ASME specification):

Designation Nominal Chromium Content (%) Nominal Molybdenum Content (%)
A387 Grade 11 1.25% 0.50%

 

ASTM A387 GR 11 CLASS 2 Chemical Composition

Grade C Mn P S Si Cr Mo
A387 Gr.11 0.05-0.17 0.40-0.65 0.035 0.035 0.50-0.80 1.00-1.50 0.45-0.65

 

Tensile Requirements for ASME SA387 Grade 11 Alloy Steel Plates Class 2 Plates

Designation: Requirement: Grade 11
SA387 Grade 11 Tensile strength, ksi [MPa] 75 to 100 [515 to 690]
  Yield strength, min, ksi [MPa]/(0.2% offset) 43 [310]
  Elongation in 8 in. [200mm], min % 18
  Elongation in 2 in. [50mm], min, % 22
  Reduction of area, min % –––

 

1. What temperature is ASME SA387 Grade 11 Class 2 ?

ASME SA387 Grade 11 Class 2 is a chromium-molybdenum alloy steel designed for high-temperature pressure vessels, offering excellent strength and corrosion resistance, often used in petrochemicals, handling temperatures generally up to around 550°C (1022°F) or higher depending on the specific ASME code and design, with its key difference from Class 1 being higher tensile strength.

 

2. What is the hardness of ASME SA387 Grade 11 Class 2 ?

The hardness for ASME SA387 Grade 11 Class 2 steel is typically specified as 200 HB (Brinell Hardness) maximum, though some sources indicate a range, with one stating 163-235 HB, balancing wear resistance for high-temperature pressure vessels. This material offers enhanced strength over Class 1 due to its higher tensile/yield requirements, with the hardness measured through the Brinell method for consistency.

 

3. What is the difference between ASME SA387 Grade 11 Class 2 and ASME SA387 Grade 11 Class 1?

ASME SA387 Grade 11 Class 1 and Class 2 have the same chemical composition but differ in mechanical properties due to heat treatment, with Class 2 offering higher tensile/yield strength for more demanding applications (quenched & tempered) and Class 1 providing better ductility (normalized), making it suitable where slightly less strength but more flexibility is needed, though both serve high-temperature pressure vessel uses.

 

4. What are the typical application fields of ASME SA387 Grade 11 Class 2 ?

ASME SA387 Grade 11 Class 2 is a chrome-moly alloy steel used for high-temperature, high-pressure applications, primarily in the oil & gas, petrochemical, and power generation industries, for building pressure vessels, boilers, heat exchangers, and pipelines due to its excellent strength, corrosion, and oxidation resistance. It's also found in refineries, chemical plants, and heavy industries like paper and sugar, handling elevated temperatures and corrosive environments, including sour gas.

 

5. What are the primary advantages of ASME SA387 Grade 11 Class 2 material?

ASME SA387 Grade 11 Class 2 offers superior high-temperature strength, excellent corrosion/oxidation resistance (especially in sour gas), and good weldability, making it ideal for pressure vessels and heat exchangers in demanding oil, gas, and petrochemical applications where durability and safety under thermal stress are critical. Its quenched and tempered (Class 2) treatment provides enhanced mechanical properties, like higher tensile strength, compared to Class 1.

 

6. What is the P number of ASME SA387 Grade 11 Class 2 ?

ASME SA387 Grade 11 Class 2 is a Chromium-Molybdenum alloy steel with 1.00-1.50% Chromium and 0.45-0.65% Molybdenum, belonging to P-Number 5A, grouping it with other low-alloy steels in ASME Section IX for welding qualification purposes, but its specific chemical makeup places it in the P5A group alongside materials like SA-213 T5.

 

7. What is ASME SA387 Grade 11 Class 2 equivalent to?

ASME SA387 Grade 11 Class 2 is a chromium-molybdenum alloy steel for pressure vessels, with its closest ASTM equivalent being ASTM A387 Grade 11 Class 2, while the British Standard (BS) equivalent is BS 621B, though direct EN or DIN equivalents aren't always listed, the EN 10028-2: 13CrMoSi5-5 grade is often compared. It's known for high-temperature strength, corrosion resistance, and is used in oil, gas, and petrochemical applications.

 

 

Contact now

 

Full specification and details are available on request. The above information is provided for guidance purposes only. For specific design requirements please contact our technical sales staff

info-500-510

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Send Inquiry

whatsapp

phone

Email

Inquiry