Why Classification Comes Before Specification
Wear resistant plate is used wherever a working surface is abraded by rock, ore, coal, slag or sand. Because the term covers products that differ in hardness, thickness and manufacturing route, the practical approach is to classify the plate first and write the specification second. Four classification methods are used in the trade, and each one answers a different purchasing question.
Classification by Hardness Class
The grade designation of a quenched and tempered wear plate states the nominal Brinell hardness of the surface. Chinese plates follow GB/T 24186-2022, which covers the NM series from NM300 to NM600 and also defines D and E grades for lower temperature service. The classes most widely traded are:
| Class | Nominal surface hardness | Typical duty |
|---|---|---|
| NM360 and NM400 | About 370-430 HBW for the 400 class | Chute liners, truck bodies, general sliding abrasion |
| NM450 | About 420-480 HBW | Buckets, hoppers, abrasive sliding wear with light impact |
| NM500 | 470-540 HBW | Crusher liners, heavy impact and gouging wear |
| NM550 and NM600 | Above 500 HBW | Severe abrasion at points, edges and lips |
Two points need checking on the certificate. Hardness is normally specified on the plate surface, and core hardness is lower, which matters when the plate will be machined, bent or welded. Hardness class also does not define wear life by itself, so comparative abrasion testing is used alongside it.
Classification by Thickness and Production Route
Thickness classification defines the handling and fabrication route. Sheet up to about 3 mm is used for liners and light pans, medium plate of roughly 4.5 to 25 mm covers most truck body and chute work, plate of about 20 to 60 mm is used for crusher and mill liners, and material above 60 mm is treated as extra heavy plate with its own cutting and welding procedures. Dimensional tolerances and flatness for steel plate are referenced to ASTM A6/A6M, and the same framework is used for wear plate orders.
Production route is the second axis. Hot rolled plate is chosen where formability matters more than hardness. Plate that is rolled and then quenched and tempered carries the high hardness classes described above. Cold rolled sheet is used for thin, accurately dimensioned wear liners. A fourth route produces composite or hardfaced plate, in which a high chromium or complex carbide overlay is deposited on a mild steel backing plate; it is classified separately because the wear layer and the backing differ in hardness and in thermal expansion, and such plate is normally ordered by overlay thickness and overlay chemistry rather than by a single hardness class.
Classification by Composition and by Application
By composition the grades fall into carbon manganese wear plate, chromium bearing grades, chromium molybdenum grades and nickel chromium molybdenum grades. Chromium and molybdenum improve hardenability through the section and help retain hardness at temperature, while small boron additions achieve comparable hardenability at lower alloy cost. Cast and hardfaced alternatives such as high chromium white iron overlays reach higher surface hardness than wrought plate but have far lower toughness, so they suit sliding abrasion without heavy impact.
Application classification is the most practical method for a buyer. Chute and hopper liners, dump truck bodies, excavator and loader buckets, crusher jaws and hammers, mill liners, screen decks and conveyor components each have a dominant wear mechanism. Impact and gouging wear, low stress sliding abrasion and high stress grinding abrasion require different balances of hardness and toughness, and quenched and tempered structural grades such as ASTM A514, with a minimum yield strength of 690 MPa, are sometimes selected for the structural members of the same equipment rather than for the wearing surface.
Frequently Asked Questions
Q: What does the designation NM400 mean?
A: NM is the abbreviation for wear resistant plate in the Chinese standard and 400 indicates the nominal surface Brinell hardness of the class. Plates in the class are supplied quenched, or quenched and tempered, with a hardness band corresponding to the nominal value in the standard.
Q: How should wear plate thickness be selected?
A: From the wear rate and the acceptable service interval rather than from the original design alone. Estimate metal loss per operating hour, multiply by the maintenance interval, and add an allowance for impact and for material consumed during installation and future repair.
Q: What is the difference between wear plate and hardfaced composite plate?
A: Wear plate is a wrought steel whose whole section is quenched and tempered to a hardness class. Composite plate carries a hard weld overlay on a tough backing plate. The composite offers higher surface hardness but lower toughness and cannot be formed or welded in the same way as wrought plate.
Q: Which test compares the abrasion resistance of different wear plates?
A: The dry sand rubber wheel abrasion test of ASTM G65 is the standard laboratory comparison. Volume loss is reported for a defined abrasive, load and number of revolutions, so results are comparable only when the same test procedure is used.
Q: Does higher hardness always mean longer service life?
A: No. Under heavy impact, a harder material may crack or spall before it wears. Choose the class that matches the dominant wear mechanism of the equipment, and accept a lower hardness class where impact is severe.
Q: What should a wear plate purchase order contain?
A: The standard and grade, the hardness class and whether surface or core hardness is verified, thickness and tolerance, delivery condition, size and quantity, and any through thickness or impact testing requirement.




