Sep 10, 2025 Leave a message

CCS EH36 Shipbuilding Steel Plate: Properties

1. What Is CCS Grade EH36?

CCS Grade EH36 is a high-strength shipbuilding steel plate approved by the China Classification Society. The designation carries precise meaning: E is the impact quality with a guaranteed Charpy V-notch energy of 27 J at -40°C, H marks the high-strength family, and 36 is the minimum yield strength in kgf/mm2 terms, equivalent to 355 MPa. The plate is used for hull structures and marine equipment where strength and low-temperature toughness are required, and it is rolled in the normalized or thermomechanically controlled processed (TMCP) condition.

2. Chemical Composition

Typical composition limits for CCS EH36 are carbon 0.18% maximum, silicon 0.50% maximum, manganese 0.90–1.60%, phosphorus and sulfur each 0.025% maximum, acid-soluble aluminum 0.015% minimum, with micro-alloying additions of niobium 0.02–0.05%, vanadium 0.05–0.10% and titanium 0.02% maximum, and residual limits for copper, chromium, nickel and molybdenum. The fine-grain practice and micro-alloying give the plate its strength and toughness without high carbon, which keeps it weldable.

3. Mechanical Properties

The guaranteed mechanical values for CCS EH36 are a minimum yield strength of 355 MPa, a tensile range of 490–630 MPa, and a minimum elongation of 21%. The Charpy V-notch impact requirement for the E quality is 27 J average at -40°C on longitudinal specimens, which qualifies the plate for structures exposed to cold marine environments. Additional conditions such as through-thickness (Z-direction) testing, ultrasonic examination and third-party inspection can be specified as required.

4. Equivalent Grades from Other Societies

EH36 plates certified by CCS correspond to the equivalent high-strength grades of other classification societies: NV E36 (DNV), GL-E36 (GL), LR/EH36 (LR), BV/EH36 (BV), RI/E36 (RINA), K E36 (NK), R E36 (KR) and AB/E36 (ABS). The property requirements follow the common IACS unified rules, so plates approved by one member society can generally be accepted by others subject to the flag state and class rules.

5. Applications and Delivery Conditions

CCS EH36 is used in shipbuilding projects and ocean and offshore structural projects: hull plates, decks, bulkheads, ship cranes and crane structures, offshore platform components and marine equipment. It can be supplied in the as-rolled condition only where the rules allow, or with additional processing such as normalization, TMCP, quenching and tempering, Z-direction testing, shot blasting and painting. For each application, the required delivery condition, impact temperature and thickness must be confirmed against the CCS rules and the approved mill certificate.

Frequently Asked Questions

What does EH36 stand for? E is the impact quality (27 J at -40°C), H means high strength, and 36 refers to the yield strength class of 355 MPa.

What is the difference between AH36, DH36 and EH36? The strength is the same; the letters denote the impact test temperature: A at 20°C, D at 0°C and E at -40°C, so EH36 is chosen for colder service.

What delivery conditions are available? Normalized, TMCP, and where the rules permit, quenched and tempered or as-rolled conditions, depending on thickness and application.

What is the tensile strength of CCS EH36? 490–630 MPa, with a minimum yield of 355 MPa and minimum elongation of 21%.

Which other societies certify EH36? all major classification societies: DNV, GL, LR, BV, RINA, NK, KR and ABS issue equivalent EH36-grade approvals.

Can EH36 be welded? Yes, with standard shipyard welding processes; the low carbon and micro-alloyed composition give good weldability, and the approved WPS should be followed.

Send Inquiry

whatsapp

phone

Email

Inquiry