LR A steel plate is common strength shipbuilding plate which is mainly used for built hull of vessels,ship body construction.Ship plate LR Grade A is the Hull structural steel,with it's good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and welding properties.In the steel standard ASTM A131/A131M,offshore steel grade ASTM A131 Grade A is the best equvialent steel grade with LR Grade A.
Rolling Type:Shipbuilding steel plate,Common strength ship plate
Thickness:3mm-300mm
Width:1200mm-4200mm
Length:3000mm-18000mm
Heat Treatment:As Rolled/Control-rolled/TMCP/Normalised
LR Grade A Shipbuilding Steel Plate Chemical Composition and Mechanical Property
| C max | Si max. | Mn min. | P max | S max | Cu max | Cr max | Ni max |
|
0.21 |
0.50 |
0.50 |
0.035 |
0.035 |
0.35 | 0.30 |
0.30 |
| Yield Strength (MPa) min. | Tensile Strength (MPa) | Elongation min. % |
| 235 | 400-520 | 22 |
LR Grade A Shipbuilding Steel Plate Application

Hull Construction
LR Grade A Marine Steel Plates are primarily used in building the hull structure of ships, including bulk carriers, oil tankers, container ships, and general cargo vessels.
The steel's high tensile strength and impact resistance ensure structural integrity under heavy loads, strong waves, and dynamic marine conditions.
Decks and Superstructures
Applied in the fabrication of ship decks, superstructures, and bulkheads, LR Grade A ship plates maintain stability and load-bearing capacity while resisting deformation.
Offshore Engineering Structures
LR Grade A offshore platform steel plate grades are also used in offshore platforms, drilling rigs, and floating production storage and offloading (FPSO) units.
Their ability to withstand low-temperature impact and harsh sea conditions makes them suitable for deep-sea oil and gas exploration projects.
Reinforcement and Safety Components
Utilized in critical parts of vessels, including keels, ribs, frames, and brackets, to provide additional strength and enhance the overall safety of ships.
LR Grade A Shipbuilding Steel Plate Other Name
LR Grade A Shipbuilding steel plate, LR Grade A Ship steel plate, LR Grade A Marine steel plate, LR Grade A steel plate .
Additional Condition
UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
If you want to learn more about GNEE's products, you can send an email to info@gneesteels.com. We are more than happy to assist you.
|
LR Steel Plate Grade Supplier |
||||
|
General Strength |
LR/A |
LR/B |
LR/D |
LR/E |
|
High Strength |
LR/AH32 |
LR/DH32 |
LR/EH32 |
LR/FH32 |
|
LR/AH36 |
LR/DH36 |
LR/EH36 |
LR/FH36 |
|
|
LR/AH40 |
LR/DH40 |
LR/EH40 |
LR/FH40 |
|
|
Extra Strength |
LR/AH42 |
LR/DH42 |
LR/EH42 |
LR/FH42 |
|
LR/AH46 |
LR/DH46 |
LR/EH46 |
LR/FH46 |
|
|
LR/AH50 |
LR/DH50 |
LR/EH50 |
LR/FH50 |
|
|
LR/AH55 |
LR/DH55 |
LR/EH55 |
LR/FH55 |
|
|
LR/AH62 |
LR/DH62 |
LR/EH62 |
LR/FH62 |
|
|
LR/AH69 |
LR/DH69 |
LR/EH69 |
LR/FH69 |
|




