What Is LR Grade AH55 Shipbuilding Steel Plate?
LR Grade AH55 is a high-strength shipbuilding steel plate certified by Lloyd's Register (LR) for constructing ship hulls and offshore structures. In the grade designation, AH indicates a high-strength marine steel, and 55 refers to the minimum yield strength class of 550 MPa, placing the plate in the extra-high-strength range. The material combines high tensile strength with excellent toughness and weldability, making it suitable for demanding marine environments and large vessels such as bulk carriers, oil tankers, and container ships.
Chemical Composition of the Extra-High-Strength Class
For the extra-high-strength series to which AH55 belongs, the maximum chemical limits are controlled to support strength, toughness, and weldability. Representative maximum values published for this class are: carbon 0.21%, silicon 0.55%, manganese 1.70%, phosphorus 0.035%, sulfur 0.035%, aluminum 0.015%, and nitrogen 0.020%, with micro-alloying additions of niobium 0.02-0.05%, vanadium 0.03-0.10%, and titanium up to 0.02%. Exact limits for Grade AH55 must be confirmed against the current Lloyd's Register Rules and the mill test certificate, because the published series values may differ from the specific grade requirement.
Mechanical Properties and Impact Testing
For the extra-high-strength class, published values indicate a minimum yield strength of 500 MPa for plate up to 100 mm, a tensile range of 610-770 MPa, and a minimum elongation of 18%. Charpy V-notch impact testing is performed with minimum energy values of 33 J and 50 J at 0 °C for the longitudinal direction. Plates can be supplied under additional conditions such as ultrasonic examination, TMCP, normalized, quenched and tempered, Z-direction testing (Z15/Z25/Z35), Charpy V-notch impact testing, and third-party testing. Because AH55 targets the 550 MPa yield class, the governing values for the specific thickness should be verified against LR Rules before design use.
Equivalent Grades Across Classification Societies
Shipbuilding plates of the extra-high-strength series have equivalents in the main classification societies. For the 500 MPa class the page lists: DNV NV A500, GL-A500, ABS AB/AQ51, BV/A500, CCS/A500, NK K A51, KR R A51, and RINA RI/A500. Equivalents for the 550 MPa class should be checked directly against each society's rules, since the numerical designation varies between societies.
Typical Applications
LR Grade AH55 marine plates are primarily used in hull structures of ships, including bulk carriers, oil tankers, container ships, and general cargo vessels, where high tensile strength and impact resistance ensure structural integrity under heavy loads and dynamic marine conditions. They are also applied to decks, superstructures, and bulkheads, to offshore platforms, drilling rigs, and floating production storage and offloading (FPSO) units, and to critical reinforcement parts such as keels, ribs, frames, and brackets.
Frequently Asked Questions
What does LR Grade AH55 mean? H indicates a high-strength shipbuilding steel, 55 refers to the minimum yield strength class of 550 MPa, and LR means the plate is certified by Lloyd's Register.
Where is LR Grade AH55 used? It is used for ship hulls, decks, superstructures, bulkheads, and offshore structures such as platforms, drilling rigs, and FPSO units.
What is the yield strength of the extra-high-strength series? The published series data list a minimum yield of 500 MPa for the 500 MPa class; the 550 MPa class targeted by AH55 must be verified against LR Rules for the specific thickness.
What delivery and testing conditions are available? Options include ultrasonic examination, as-rolled, TMCP, normalized, quenched and tempered, Z-direction testing (Z15/Z25/Z35), Charpy V-notch impact testing, and third-party testing such as SGS.
What is the equivalent of the LR extra-high-strength series in other societies? For the 500 MPa class, equivalents include NV A500, ABS AB/AQ51, BV/A500, CCS/A500, and NK K A51; confirm the matching yield class in each society's rules.
Is LR Grade AH55 suitable for low-temperature service? Impact requirements depend on the grade suffix and thickness; the published data for this series specify 33 J and 50 J at 0 °C, so confirm the design temperature requirements before selection.




