What is P355N material equivalent to ?
P355N (EN 1.0562) is a European fine-grain structural steel, with key equivalents including ASTM A537 Class 1 (US), API 5L Grade X52, and older standards like StE 355 (German DIN) and 2106 (Swedish SS), all characterized by good weldability and strength for pressure vessels, boilers, and pipelines.

EN10028 steel grade supersedes the older BS and DIN standards.
P355N steel grade is one of grade in En10028-3, which is non alloy and alloy steels with specified elevated temperature properties. P355N grades are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids
P355N (Material Number 1.0562) is a non-alloy steel that achieves its strength through a combination of chemical composition and the Normalizing process. It is classified as a "fine-grain" steel because it utilizes micro-alloying elements like Aluminum to prevent grain growth during heating, resulting in a tougher, more reliable metal.
Decoding the Name:
P: Indicates the material is certified for use under the PED 2014/68/EU for pressure equipment.
355: The yield point threshold of $355$ N/mm², providing a high safety margin for vessel walls.
N: Confirms the microstructure has been refined through a controlled normalization furnace cycle.
Key Comparison:
The main distinction is between P355N and P355NH. While both share the same strength, the "H" in P355NH stands for "High Temperature." P355NH is specifically tested for yield strength at temperatures up to 400°C, whereas P355N is the standard version intended for room temperature or moderate thermal service.
Key Characteristics:
Fine Grain Structure: The grain size is typically 6 or finer according to ASTM standards, which significantly reduces the risk of brittle fracture.
Chemical Purity: Low levels of Phosphorus ($\le 0.025\%$) and Sulfur ($\le 0.015\%$) minimize "hot shortness" and improve the quality of the welds.
Isotropic Properties: Normalizing ensures that the steel's strength is nearly identical whether measured longitudinally or transversely to the rolling direction.

Common Applications:
Ideally suited for spherical storage tanks for LPG, chemical reactors in processing plants, and separators used in the oil and gas upstream sector where pressure consistency is vital.
Is P355N steel hard to drill?
Yes, P355N steel can be challenging to drill because it's a high-strength, low-alloy (HSLA) steel, similar to stainless steels in requiring specific techniques, slower speeds, more pressure, and specialized carbide or cobalt bits to manage heat and hardness, preventing dulling and bit failure.
What is the yield strength of P355N?
The yield strength of P355N steel varies with thickness, typically ranging from a minimum of 355 MPa for thinner sections (≤ 16mm) down to 295 MPa or lower for very thick sections, as it's a normalized, fine-grained steel used for pressure vessels (EN 10028-3). For example, thicknesses over 100mm might have a minimum yield strength of 305 MPa, while thicker plates (over 150mm) could be 295 MPa.
What are the properties of P355N?
P355N is a weldable, fine-grained, non-alloy steel (EN 1.0562) for pressure vessels, known for its good high-temperature strength and resistance to brittle fracture, supplied in a normalized condition with properties like minimum yield strength of 355 MPa (at +N condition) and tensile strength around 490-630 MPa, featuring low Cr/Mo content for enhanced strength and heat resistance.
|
Equivalent steel grade of P355N |
|||||||
|
Europe |
Belgium |
Germany |
France |
Italy |
Sweden |
India |
Japan |
|
Fe E355 |
D52-1,2 |
A St52 |
A52CP |
Fe510-1-KW |
SS 21,06,01 |
Grade 1 |
SPV 355 |
|
P355N Chemical Composition |
|||||||
|
Grade |
The Element Max (%) |
||||||
|
C |
Si |
Mn |
P |
S |
Al(min) |
N |
|
|
P355N |
0.20 |
0.50 |
0.9-1.70 |
0.03 |
0.025 |
|
0.02 |
|
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
|
0.30 |
0.30 |
0.08 |
0.005 |
0.50 |
0.03 |
0.10
|
|
Mechanical properties of steel P355N (1.0562)
| Nominal thickness (mm): | to 60 | 60 - 100 | 100 - 150 | 150 - 250 |
| Rm - Tensile strength (MPa) (+N) | 490-630 | 470-610 | 460-600 | 450-59 |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 60 | 60 - 100 | 100 - 150 | 150 - 250 |
| ReH - Minimum yield strength (MPa) (+N) | 355 | 345 | 335 | 315 | 305 | 295 |
| KV - Impact energy (J) transverse, (+N) | -20° 27-30 |
0° 35-40 |
+20° 39-50 |
| KV - Impact energy (J) longitud., (+N) | -20° 40-45 |
0° 47-65 |
+20° 55-75 |
| Nominal thickness (mm): | to 60 | 60 - 250 |
| A - Min. elongation at fracture (%) (+N) | 22 | 21 |
What is the hardness of P355N?
P355N steel, a normalized, weldable pressure vessel steel (EN 1.0562), typically has a Brinell hardness value around 120-160 HB for thinner sections, though specific values depend on thickness, with strength requirements (yield 355 MPa, tensile 490-650 MPa) often prioritized over hardness, noted for good toughness.
What temperature is P355N?
P355N is a fine-grained construction steel for pressure vessels, designed for normal to low-temperature service, with its strength maintained down to around -20°C, though it's often specified for general room-temperature use in applications like tanks and pipes, unlike P355NH for low temps or P355GH for high temps. While it has a high melting point (around 1370-1400°C), its service temperature range is typically from sub-zero to around 400°C, with specific mechanical properties varying by temperature.
What are the typical application fields of P355N?
P355N is a normalized, fine-grain steel primarily used for pressure vessels, boilers, and pressure piping in industries like oil, gas, chemical processing, and power generation, for manufacturing items such as reactors, heat exchangers, storage tanks, and gas cylinders, valued for its good weldability and performance at various temperatures.
What are the primary advantages of P355N ?
P355N steel's primary advantages are its high strength, excellent toughness, and good weldability, making it ideal for demanding applications like pressure vessels and boilers, especially those requiring good impact resistance, even at lower temperatures (as seen in related P355NL grades). It offers superior performance in high-pressure, high-temperature environments, with variants providing enhanced low-temperature toughness (NL1/NL2), ensuring reliability in critical energy and chemical infrastructure.
What are common testing requirements for P355N ?
P355N, a weldable fine-grain structural steel for pressure vessels (EN 10028-3), requires tests for mechanical properties (tensile, impact at low temperatures), chemical composition, dimensional accuracy, internal soundness (ultrasonic testing), and surface quality, often with PWHT simulation and mill test certificates (EN 10204 3.1/3.2). Key tests include low-temperature impact tests (Charpy V-notch), tensile strength, and ultrasonic testing (UT) for internal defects, ensuring suitability for pressure applications.
What is the composition of P355N ?
P355N is a normalized, weldable fine-grain structural steel (EN 1.0562) for pressure purposes, primarily composed of iron with controlled amounts of carbon, manganese, silicon, phosphorus, sulfur, and small additions of chromium, molybdenum, niobium, titanium, vanadium, aluminum, and nitrogen, designed for strength in boilers, pressure vessels, and piping, with key elements like Mn (0.9-1.7%) and low Carbon (<=0.2%) ensuring weldability and fine grain structure.
What is the maximum allowable stress value for P355N ?
P355N is a pressure vessel steel with a minimum yield strength (Rp0,2) of 355 MPa and a tensile strength (Rm) range of 490-650 MPa, but its maximum allowable stress depends heavily on the design code (like ASME or EN 13480) and the operating temperature, typically being a fraction (e.g., 1/3 to 1/2) of the yield strength at room temperature, but decreasing at higher temperatures.
If you want to learn more about P355N GNEE's products, you can send an email toinfo@gneesteels.com . We are more than happy to assist you.





