What is S460QL1?
S460QL1 is a quenched and tempered high-strength structural steel specified in EN 10025-6.
It provides:
Minimum yield strength: 460 MPa
Guaranteed low-temperature impact toughness at –50°C
Excellent toughness, ductility, and weldability
Slightly higher impact performance compared to standard S460QL
The "QL1" designation means:
Q = Quenched and tempered
L1 = Low-temperature toughness with higher guaranteed values than standard L
S460QL1 is typically used in bridges, offshore platforms, cranes, wind towers, and cold-climate structural applications.
1. Chemical Composition (Typical Values, %)
| Element | C (max) | Si | Mn | P (max) | S (max) | Nb | V | Ti |
|---|---|---|---|---|---|---|---|---|
| S460QL1 | 0.20 | ≤ 0.55 | 1.60 | 0.025 | 0.015 | ≤0.06 | ≤0.12 | ≤0.03 |
2. Mechanical Properties
| Property | Value |
|---|---|
| Yield Strength (≤40 mm) | 460 MPa |
| Yield Strength (40–100 mm) | 440–460 MPa |
| Tensile Strength | 560–720 MPa |
| Elongation (A5) | ≥ 20 % |
| Charpy Impact | ≥ 40 J at –50 °C |
| Density | 7.85 g/cm³ |

What is S460 material equivalent to?
S460 steel is a high-strength structural steel under EN 10025, with a minimum yield strength of 460 MPa. Its equivalents in other standards depend on the grade and processing (thermo-mechanically rolled or quenched and tempered):
| Standard | Equivalent Steel |
|---|---|
| EN 10025-4 / 6 | S460M, S460ML, S460N, S460Q, S460QL, S460QL1 |
| ASTM | A709 Grade 50, A572 Grade 65 (depending on toughness requirements) |
| GB/T (China) | Q460M, Q460N, Q460Q (depending on processing) |
| JIS (Japan) | SN490B, SN490M (low-alloy structural steel) |
| DIN (Germany) | StE460M, StE460ML |
Summary:
S460 is roughly equivalent to other high-strength, low-alloy steels with minimum yield ~460 MPa.
Care must be taken to match rolling method, low-temperature toughness, and impact requirements when substituting internationally.

What is the standard for S460 steel?
The standard for S460 steel depends on the specific grade and processing method:
| Grade | Standard | Key Notes |
|---|---|---|
| S460M / S460ML | EN 10025-4 | Thermo-mechanically rolled (TMCP) high-strength structural steel; "ML" indicates low-temperature toughness. |
| S460N / S460NL | EN 10025-3 | Normalized rolled high-strength structural steel; "NL" indicates low-temperature impact toughness. |
| S460Q / S460QL / S460QL1 | EN 10025-6 | Quenched and tempered high-strength structural steel; "QL" and "QL1" indicate guaranteed low-temperature toughness. |
Summary:
S460M / ML → TMCP steel → EN 10025-4
S460N / NL → Normalized steel → EN 10025-3
S460Q / QL / QL1 → Quenched & tempered steel → EN 10025-6
This ensures the steel meets minimum yield strength 460 MPa, toughness, and weldability requirements for structural applications.
GNEE Steel also supplies a variety of high-strength steel plates, such as A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E, etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to info@gneesteels.com. You are welcome to consult us, and we are very willing to answer your questions.




