What Is ASTM A36M Steel?
ASTM A36M is the metric version of ASTM A36, the American specification for carbon structural steel. It covers carbon steel plates, shapes, and bars for structural purposes and specifies the same mechanical and chemical requirements as A36, but with values expressed in metric units. A36M is widely used in construction, industrial equipment, and general structural applications because of its excellent weldability, moderate strength, and cost efficiency.
Mechanical Properties
The standard mechanical requirements of A36M are: minimum yield strength of 250 MPa, tensile strength of 400-550 MPa, and minimum elongation of 20%. Yield strength decreases with thickness: at least 250 MPa for plate up to 20 mm, 245 MPa for 20-40 mm, and 235 MPa for plate over 40 mm, while the tensile range remains 400-550 MPa across these thicknesses.
Typical Chemical Composition
Typical maximum composition values in percent by weight are: carbon 0.25, manganese 1.20, phosphorus 0.040, sulfur 0.050, and silicon 0.40. The controlled carbon and manganese content ensures excellent weldability and ductility, which is why A36M is a default choice for welded structures and general fabrication.
Equivalent Steels
ASTM A36M is often compared with international structural carbon steels. The commonly cited equivalents include:
EN S275 (Europe): a structural steel with a minimum yield of 275 MPa, slightly stronger than A36, and often used as a direct trading equivalent.
EN S235JR (Europe): a milder structural steel with 235 MPa minimum yield, frequently listed as the closest yield-level match.
JIS SS400 (Japan): a general structural steel with similar strength and application range.
GB Q235 (China): a mild carbon structural steel comparable to A36 in general use.
These grades match A36M in mechanical performance and composition closely enough for most structural applications, but the governing design values should be verified against the project code before substitution.
Typical Plate Sizes and Applications
A36M plates are commonly available in thicknesses from 6 mm to 50 mm, widths from 1,500 mm to 3,000 mm, and lengths from 6,000 mm to 12,000 mm, with custom sizes supplied on request. The grade is used in bridges and construction frameworks, industrial machinery platforms, general fabrication structures, and base plates, support beams, and brackets. Its versatility and metric compliance make it suitable for international projects.
Frequently Asked Questions
What is the difference between ASTM A36 and A36M? 36M is the metric version of A36; the two specifications have the same requirements, with A36M expressing the values in metric units.
What are the mechanical properties of ASTM A36M? Minimum yield 250 MPa for plate up to 20 mm, tensile 400-550 MPa, and minimum elongation 20%; yield drops to 245 MPa for 20-40 mm and 235 MPa above 40 mm.
What is ASTM A36M equivalent to? Commonly cited equivalents are EN S275, JIS SS400, and GB Q235; EN S235JR is also frequently listed as a yield-level match.
What is the chemical composition of A36M? Typical maximum values are carbon 0.25%, manganese 1.20%, phosphorus 0.040%, sulfur 0.050%, and silicon 0.40%.
Where is A36M used? In bridges, building structures, machinery platforms, base plates, support beams, and general fabrication.
Is A36M easy to weld? Yes, its controlled carbon content gives excellent weldability with standard processes, which is one of the main reasons it is so widely specified.




