Jan 30, 2026 Leave a message

What is the delivery condition for ASTM A285 Grade C

What is the delivery condition for ASTM A285 Grade C

ASTM A285 Grade C steel plates are typically delivered in the as-rolled condition, designed for low- to intermediate-tensile strength pressure vessel applications. While as-rolled is standard, the material can be supplied in normalized or stress-relieved conditions if specified, as it is a common carbon steel for tanks and boilers.

ASTM A285 Grade C

ASTM A285 Grade C represents a mid-range carbon steel plate used in the manufacture of fusion-welded boilers and pressure vessels. It is defined by its moderate tensile strength and high level of purity in its carbon-manganese composition. This grade is specifically intended for vessels where the internal pressure is moderate and the operating temperatures are relatively stable. It provides a reliable "middle ground" for designers-stronger than Grades A and B of the same specification, yet more flexible and easier to work with than high-strength pressure vessel steels like A515 or A516.

 

Key Characteristics

Smooth Surface Finish: Generally exhibits a clean, scale-free surface that is easy to coat, paint, or line with protective materials.

Fusion-Welding Optimized: The alloy balance is specifically designed to create high-integrity weld beads with minimal porosity.

Stable Thermal Expansion: Maintains predictable dimensions during standard heating cycles found in industrial boilers.

Predictable Machinability: Can be easily drilled, tapped, or flame-cut with standard shop equipment without excessive tool wear.

Code-Approved Design Values: Features a long history of documented performance in ASME safety codes, simplifying the engineering approval process.

 

Grade Designation

ASTM: American Society for Testing and Materials.

A: Prefix for Ferrous (iron-based) materials.

285: The specific standard for low and intermediate tensile strength carbon steel plates.

Grade C: The highest strength tier (55–75 ksi) within the A285 specification.

 

Comparison (vs. ASTM A515 Grade 70)

Heat Focus: A515 is designed specifically for high-temperature service; A285 Gr C is for ambient/moderate temperatures.

Grain Size: A515 is often coarse-grained to improve high-temperature creep; A285 Gr C has no specific grain size requirement.

Max Thickness: A515 can be produced in much thicker plates, whereas A285 Gr C is capped at 2 inches.

Strength Threshold: A515 Gr 70 starts at 70 ksi minimum tensile; A285 Gr C tops out at 75 ksi maximum.

info-779-249

Common Application

Air Receiver Tanks: Vertical or horizontal tanks used to store compressed air for industrial pneumatic systems.

Waste Water Clarifiers: Large-scale tanks used in municipal sewage treatment to separate solids from liquids.

Small Industrial Boilers: Fire-tube or water-tube boilers used in laundries and food processing plants.

Oil and Water Separators: Horizontal vessels used in oilfields to separate mixed fluids by gravity.

Buffer Tanks: Large storage vessels used in chilled water loops to stabilize temperature in HVAC systems.

 

How does ASTM A285 Grade C perform in corrosive environments?
ASTM A285 Grade C is not designed for use in highly corrosive environments. While it may perform adequately in non-corrosive or mildly corrosive conditions, it lacks the corrosion resistance of materials such as stainless steel or alloy steels. For environments where corrosion is a major concern, additional protection like coatings, corrosion inhibitors, or using a more corrosion-resistant material would be necessary.
Can ASTM A285 Grade C be heat-treated?
Yes, ASTM A285 Grade C can be heat-treated to improve its mechanical properties, such as strength and toughness. Common heat treatments include annealing or normalizing, which can improve the steel's formability and stress resistance. However, it is not typically subjected to hardening processes like quenching or tempering, as the grade is not designed for high-strength applications.

Is ASTM A285 Grade C suitable for high-temperature applications?
ASTM A285 Grade C is designed for low to moderate temperature applications. It is not suitable for high-temperature conditions where materials need to resist creep or oxidation. For higher temperature applications, other alloy steels or stainless steel grades would be more appropriate. However, for typical boiler or pressure vessel use at low temperatures, it provides adequate performance.

 

 

ASTM A285 grade C steel chemical composition and mechanical property:

Grade ASTM A285 grade C steel Chemical Composition(%)
C Mn≥ Si P S
A285 grade C 0.28 0.98 - 0.035 0.035

Grade

ASTM A285 grade C steel Mechanical Property
Tensile Strength(MPa) Yield Strength(MPa) % Elongation in 2 in.(50mm) min Impacting Test Temperature(°C)  
A285 grade C 380-515 205 25 -20, -40, -60  

 

1. What are the benefits of using ASTM A285 Grade C?
The primary benefits of ASTM A285 Grade C are its excellent weldability, ease of fabrication, and cost-effectiveness for low-pressure applications. It is ideal for use in industries where strength is not the primary concern, and moderate mechanical properties are sufficient. Its good formability allows it to be easily shaped into various components like pressure vessels, boilers, and tanks.

 

2. What are the chemical properties of ASTM A285 Grade C?
ASTM A285 Grade C contains a controlled composition of carbon (0.13-0.20%), manganese (0.60-0.90%), silicon (0.15-0.35%), phosphorus (0.035% max), and sulfur (0.035% max). These elements provide a balance of strength, formability, and weldability. The low carbon content ensures good machinability and resistance to brittleness, making it suitable for applications that do not require extremely high strength.

 

3. What is the tensile strength of ASTM A285 Grade C?
The tensile strength of ASTM A285 Grade C ranges from 340 to 485 MPa (49 to 70 ksi), which is moderate compared to higher-strength pressure vessel steels. This range is adequate for low to moderate pressure applications, making it suitable for industries where the strength requirement is not as critical. Its tensile strength allows it to withstand moderate mechanical stress without failure.

 

4. Where is ASTM A285 Grade C commonly used?
ASTM A285 Grade C is commonly used in the construction of low to moderate pressure vessels, tanks, and other structural components. It is also used in oil refineries, chemical plants, and power plants, where pressure vessels and boilers are common. The material is ideal for applications where strength is not the highest priority but where weldability and formability are more critical.

 

5. What is ASTM A285 Grade C?
ASTM A285 Grade C is a carbon steel grade designed for low to moderate pressure vessels. It offers good weldability and is used in applications where high strength is not critical, such as in the manufacture of boilers, tanks, and other vessels operating at low to moderate pressures. This steel is ideal for general structural purposes and provides good formability and machinability.

 

6. How does ASTM A285 Grade C compare to ASTM A36?
ASTM A285 Grade C is similar to ASTM A36 in terms of its general mechanical properties and uses. However, A285 Grade C is designed specifically for low-pressure vessels and is often preferred in applications like tanks and boilers. A36 is a general-purpose structural steel that is used in a wider range of construction and fabrication applications, whereas A285 is more suitable for low-pressure pressure vessels.

 

7. What is the yield strength of ASTM A285 Grade C?
The yield strength of ASTM A285 Grade C is approximately 205 MPa (30 ksi), which is relatively low compared to higher-strength steels. This makes the material suitable for low-pressure environments where high mechanical strength is not necessary. It provides adequate performance for structural applications, pressure vessels, and tanks under moderate stresses.

 

 

Contact now

For more details about GNEE's steel products, contact us at info@gneesteels.com. We look forward to working with you.

info-514-725

Send Inquiry

whatsapp

phone

Email

Inquiry