Jan 21, 2026 Leave a message

What is the difference between P355GH and P355NH?

What is the difference between P355GH and P355NH?

P355GH: This steel is designed for high-temperature applications and is characterized by high strength at temperatures up to 500 °C. P355NH: This steel is designed for low-temperature applications and is characterized by high toughness at low temperatures.EN 10028-3 P355GH is a high-quality, normalized, weldable steel plate for pressure vessels, boilers, and heat exchangers, engineered for elevated temperature service, offering excellent strength (minimum 355 MPa yield strength) and good weldability, common in the petrochemical and energy industries. The 'P' signifies pressure vessels, 'G' indicates suitability for elevated temperatures, and 'H' denotes the heat treatment condition, with specific properties defined by the EN 10028 standard.

P355GH

 

P355GH steel is used worldwide by fabricators of welded pressure vessels, industrial boilers and heat exchangers and is engineered to work well in elevated temperature service.

 

EN 10028-3 P355GH is a slightly confusing designation because it blends two different parts of the European pressure vessel standard.

Technically, P355GH belongs to EN 10028-2, while EN 10028-3 covers grades like P355NH. However, these materials are often discussed together because they are both "P355" (355 MPa yield) steels used for pressure equipment like boilers and heat exchangers.

 

Decoding the Name

P: Pressure purpose steel.

355: Minimum yield strength of 355 MPa 

GH: Characteristics for Elevated Working Temperatures.

NH: (From Part 3) Characteristics for Normalised fine-grain steel with good weldability.

 

Key Comparison: P355GH vs. P355NH

While both are used in pressure vessels, they are optimized for different environments:

 

Mechanical Properties (P355GH)

Yield Strength:355 MPa (decreases as thickness increases).

Tensile Strength : 510 – 650 MPa.

Elongation:  21%.

Impact Test: Usually tested at 27J or 40J at $+20$°C, $0$°C, and $-20$°C.

 

Why the confusion?

It is very common for steel plates to be multi-certified.A single piece of high-quality steel  meet the requirements for:

EN 10028-2 P355GH (Heat resistant)

EN 10028-3 P355NH (Fine grain/Weldable)

ASTM A516 Grade 70 (The American equivalent)

info-808-311

 

What is the density of 10028-3 P355NH?

The density of P355NH steel, specified under EN 10028-3 for pressure purposes, is consistently 7.85 g/cm³ (or 7850 kg/m³), a standard value for this non-alloy steel, also known by its < steel number

What Is EN 10028-2 P355GH Steel Plate ?

The EN 10028-2 P355GH Steel Plate with grade P355GH has both alloy and non-alloy steels, with specific properties especially at elevated temperatures. The P355gh steel plate material is used in the manufacturing process of boilers, pipes which transport hot liquids, and pressure vessels.

What temperature is 10028-3 P355NH?

P355NH is a steel grade (EN 10028-3) designed for elevated temperatures, typically up to around 400°C (750°F), offering good weldability and strength for pressure vessels, with its 'NH' designation indicating heat-resistant quality. It's a fine-grained steel known for reliable mechanical properties in demanding high-temperature and high-pressure applications, unlike its low-temperature counterparts (NL1, NL2).

 

P355GH Material Specification

Heat Treatment TMCP,AR, Q+T, N
Thickness

6 – 150 mm

Width

Up to 3 metres wide

Length

Up to 12 metres long

Equivalents

Fe E355, D52-1,2, 19Mn8, A52 CP, Fe510-1-KW, SS 21,06,01, SPV355

Certification

Mill Test Reports Available as per EN 10204 3.1

 

P355GH steel composition(%)


Grade

C. %

Mn.%

S.

N

Cu

Nb

Ti.

Si.

P.

AL

Cr.

Mo.

Ni

Vi

P355GH

0.10-0.22

0.10-1.70

0.015

0.012

0.30

0.020

0.03

0.60

0.025

0.020

0.30

0.08

0.30

0.02

 

P355GH steel mechanical properties


Grade

Type

Thickness mm

Yield strength Mpa(min)

Tensile Strength MPa

Elongation % (min)

Impact Energy (KVJ) (min)

-20°

0°

+20

P355GH

Normalized

≤16 16>to≤40 40>to≤60 60>to≤100 100>to≤150 150>to≤250

355

510-650

20

27

34

40

345

510-650

20

27

34

40

335

460-580

20

27

34

40

315

490-630

20

27

34

40

295

480-630

20

27

34

40

280

470-630

20

27

34

40

 

 

1What Is En 10028-2Equivalent Grades in Europe?

Germany : DIN/ Wnr 19Mn8

Finland : SFS Fe52BP / Fe52DP

Europe : EU / EN P355GH

Belgium : D52 -1,2

Italy : UNI Fe510-1-KW

France : AFNOR A52 CP

Spain : UNE A52RCI

Sweden: SS 2103

 

2What Is En 10028-2 Equivalent Grades in the United States of America?

ASTM A516 Gr. 70 / ASTM A414 Gr. G /ASTM A537 CL1

 

3What do the numbers in 10028-3 P355GH mean?

In "10028-3 P355GH," 10028 refers to the EN 10028 European standard for pressure vessel steels, -3 indicates Part 3 for weldable fine-grain steels, P means Pressure vessel steel, 355 signifies a minimum yield strength of 355 MPa, and GH denotes suitability for High-temperature service, making it a steel for boilers and pressure equipment in high-heat environments.

 

4Is 10028-3 P355GH carbon steel?

Yes, P355GH (from EN 10028-3) is a high-quality, fine-grain, non-alloy carbon steel specifically designed for elevated temperatures in boilers, pressure vessels, and heat exchangers, known for its excellent weldability, toughness, and strength at high pressures.

 

5What is P355GH material standard?

P355GH is a European standard (EN 10028-2) non-alloy steel plate for pressure vessels and boilers, known for its good strength, weldability, and performance at elevated temperatures, typically supplied normalized, with a yield strength of at least 355 MPa. It's used in demanding industrial applications like power plants and petrochemical facilities where it needs to withstand high pressure and heat, with equivalents in older standards like DIN and ASTM.

 

6What is the price of 10028-3 P355GH?

The price for P355GH steel, often found under EN 10028-2, varies but generally falls in the range of $500 to $1000 USD per Ton, depending on supplier, market conditions, quantity, and specific dimensions (plates, pipes).

 

7What Is P355Gh Material Properties?

P355GH is a normalized, non-alloy steel for pressure vessels, known for good weldability and performance at high temperatures (up to about 400°C), offering good yield strength (e.g., 355 MPa min at room temp for thinner sections) and tensile strength (510-650 MPa), used in boilers, heat exchangers, and petrochemical equipment. Its properties include fine grain structure, high resistance to pressure, and good impact toughness, making it ideal for elevated temperature service

 

Contact now

 

Request a professional quotation for (牌号) from GNEE Steel.

info-812-678

 

 

 

 

 

 

 

 

 

Send Inquiry

whatsapp

phone

Email

Inquiry