What is the equivalent of P690QL1 steel?
P690QL1 is an EN standard (EN 10028-6) for a weldable fine-grain, quenched and tempered alloy steel, designated as EN 1.8881, used for pressure equipment and vessels, offering good low-temperature properties (down to -40°C) and high strength (690 MPa yield); equivalents aren't always direct but similar high-strength, low-alloy (HSLA) steels like S690QL (1.8928) or specific high-strength grades under ASTM/SAE might serve similar roles, though composition and properties vary.

P690QL1 is a quenched and tempered pressure vessel steel specifically developed for severe service conditions combining high pressure and low temperature. It complies with EN 10028-6 requirements.
Decoding the name
"P" denotes pressure use,
"690" refers to yield strength,
"Q" means quenched and tempered,
"L1" specifies low-temperature impact toughness at –60°C.
Key characteristics
The main features of P690QL1 include very high yield strength, excellent low-temperature toughness, and a stable, tempered microstructure. It can sustain high internal pressures and resist brittle fracture. Its weldability is acceptable for high-strength steels when proper fabrication procedures, preheating, and low-hydrogen consumables are applied. This combination of properties makes it a reliable material for demanding pressure applications.
Comparison
Compared with standard pressure vessel steels like P460NL1, P690QL1 enables lighter designs due to higher strength. Compared to P690Q, the L1 variant ensures better toughness at very low temperatures, improving safety in cold-service applications or offshore conditions.

Applications
It is used in pressure vessels, LNG storage systems, petrochemical reactors, boilers, and heat exchangers. Its properties make it suitable for low-temperature and high-pressure environments where both mechanical strength and fracture resistance are critical.
Are there any limitations of P690QL1?
P690QL1 is more expensive than lower-strength pressure vessel steels and requires strict fabrication control. Welding, forming, and heat input must be carefully managed. Improper processing can lead to cracking or reduced toughness, so experienced fabrication practices are essential.
Why choose P690QL1 over lower-strength pressure vessel steels?
P690QL1 is chosen when high pressure, low temperature, and strict safety requirements must be met. Although it has higher material and fabrication costs, its superior strength and toughness provide better performance, longer service life, and increased safety in critical pressure applications.
What is the typical delivery condition of P690QL1?
P690QL1 is delivered in the quenched and tempered condition. Plates are supplied with inspection certificates, usually EN 10204 3.1, confirming chemical composition, mechanical properties, heat treatment, and compliance with the applicable standard.
Chemical composition % of steel P690QL1 (1.8881): EN 10028-9-2003
| According EN 10216-3:2014: 1.2=< Mn=<1.7; P=<0.025; S=<0.015; Al=<0.02; |
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Cu | Zr | B |
| max 0.2 | max 0.8 | max 1.7 | max 2.5 | max 0.02 | max 0.008 | max 1.5 | max 0.7 | max 0.12 | max 0.015 | max 0.06 | max 0.05 | max 0.3 | max 0.15 | max 0.005 |
Mechanical properties of steel P690QL1 (1.8881)
| Nominal thickness (mm): | to 100 | 100 - 150 |
| Rm - Tensile strength (MPa) (+QT) | 770-940 | 720-900 |
| Nominal thickness (mm): | to 50 | 50 - 100 | 100 - 150 |
| ReH - Minimum yield strength (MPa) (+QT) | 690 | 670 | 630 |
| Nominal thickness(mm): | to 20 | 20 - 40 | 40 - 50 | 50 - 65 | 65 - 80 | 80 - 100 |
| Rp0.2 0.2% proof strength (MPa) (+QT) | 690 | 650 | 615 | 580 | 540 | 500 |
| KV - Impact energy (J) transverse, (+QT) | -40° 27 |
-20° 31-40 |
0° 39-60 |
+20° 43 |
| KV - Impact energy (J) longitud., (+QT) | -30° 40 |
-20° 47 |
-10° 53 |
0° 60 |
+20° 65 |
| A - Min. elongation at fracture (%) (+QT) | 14-16 |
1Is P690QL1 resistant to corrosion?
P690QL1 is not inherently corrosion resistant. Like most carbon and low-alloy steels, it requires appropriate corrosion protection such as coatings, linings, or cathodic protection depending on the service environment. Corrosion resistance depends mainly on external protection and maintenance.
2What welding consumables are recommended for P690QL1?
Low-hydrogen welding consumables with matching or slightly undermatching strength are commonly recommended. Consumables should provide good impact toughness at low temperatures to match the base material properties. Selection depends on welding process, joint design, and applicable pressure vessel standards.
3Can P690QL1 be used at very low temperatures?
Yes, P690QL1 is specifically designed for very low-temperature service. With guaranteed impact toughness at –60°C, it is suitable for cold-region installations, low-temperature pressure vessels, and certain cryogenic-related applications.
4What is the minimum yield strength of P690QL1?
The minimum yield strength of P690QL1 is 690 MPa for plate thicknesses up to 50 mm. For thicker plates, the specified minimum yield strength may decrease slightly according to EN 10028-6. This high yield strength allows for thinner plate designs and reduced overall vessel weight.
5How does P690QL1 perform under high pressure?
P690QL1 performs very well under high pressure due to its high yield and tensile strength. It resists plastic deformation and maintains structural integrity even under severe internal pressure, making it suitable for critical pressure vessel and reactor applications.
6Can P690QL1 be cold formed?
Cold forming of P690QL1 is possible but limited due to its high yield strength. Larger bending radii are required compared to lower-strength steels. Excessive cold deformation can reduce toughness or cause cracking, so forming operations must follow manufacturer and standard recommendations.
7What inspection and testing are required for P690QL1?
Required tests typically include chemical analysis, tensile testing, impact testing at low temperature, and ultrasonic testing. Plates are usually supplied with EN 10204 Type 3.1 inspection certificates to confirm compliance with EN 10028-6 and customer requirements.
If you want to learn more about P690QL1 GNEE's products, you can send an email toinfo@gneesteels.com . We are more than happy to assist you.





