What is the maximum allowable stress value for ASME SA387 Grade11 Class1?
For ASME SA387 Grade 11 Class 1, the maximum allowable stress values are determined by ASME Section II, Part D (Table 1A), and vary significantly based on the operating temperature; for instance, at a typical temperature of $650^\circ\text{F}$ ($345^\circ\text{C}$), the allowable stress is approximately 13.8 ksi (95 MPa), but this value decreases as temperatures rise toward its upper limit of $1000^\circ\text{F}$ ($538^\circ\text{C}$) to account for reduced material strength and creep resistance.

The pressure vessel plates made of ASTM A387 Grade 11 (identical with ASME SA-387 Gr. 11) are chromium-molybdenum alloy steel plates intended primarily for welded boilers and pressure vessels designed for elevated temperature service. The ASME SA-387/ ASTM A387 Gr. 11 steel has the nominal composition of 1.25Cr-0.5Mo-Si with a UNS designation number of K11789 and a P-number of 4.
ALLOY STEEL SA 387 GR. 11 CL. 1 / 2 incorporates an array of elements, the concentration of which is contingent upon the specific alloy composition. These plates are an iron-nickel-chromium foundation that establishes the industry standard in high-temperature applications needing optimal creep and rupture characteristics. There are two classes available according to tensile strength levels: Class 1 and Class 2.
Alloy Steel SA 387 Grade 11 Class 2 Plates exhibit high resilience to oxidation and carburization in high-temperature environments. Furthermore, they provide excellent corrosion resistance in acidic environments. This allows the alloy to adjust to the requirements of various sectors, enabling top metal businesses to offer a variety of forms and designs, including coils and plates, to meet the intricate demands of the global industry.
Key Characteristics
Material Type: Alloy Steel Plate.
Standard: ASME SA387 (ASTM A387 equivalent).
Grade: 11 (1.25% Chromium, 0.5% Molybdenum).
Class: 1 (specifies mechanical property requirements).
Applications: Boilers, pressure vessels, heat exchangers, reactors, high-temp storage, oil & gas, petrochemicals.
Properties & Benefits
High-Temperature Performance: Excellent thermal strength and creep resistance.
Corrosion Resistance: Chromium provides good oxidation and corrosion resistance, ideal for sour gas.
Weldability: Good weldability for fabrication into critical equipment.

What precautions should be taken when welding ASME SA387 Grade 11 Class 1 steel?
When welding SA387 Grade 11 Class 1 steel (a low-alloy chromium-molybdenum steel), key precautions involve proper preheating (around 250°F/121°C minimum) to prevent cracking, selecting appropriate filler materials (like EB2 group), controlling interpass temperatures, applying Post Weld Heat Treatment (PWHT) (around 1200°F/650°C) to relieve stress, ensuring good ventilation, and using full Personal Protective Equipment (PPE), while cleaning the surface thoroughly.
What is the ASME SA387 Grade11 Class1 standard?
ASME SA387 Grade 11 Class 1 is a chromium-molybdenum alloy steel plate for high-temperature pressure vessels and boilers, offering good creep, corrosion, and oxidation resistance, with lower strength but better elongation than Class 2, making it suitable for refineries and petrochemical plants in sour gas or hydrogen service.6 Key elements are ~1.25% Chromium (Cr) and ~0.5% Molybdenum (Mo), providing strength and stability for demanding environments, typically supplied normalized and tempered.7
What is ASME SA387 Grade 11 Class 1 material?
ASME SA387 Grade 11 Class 1 is a chromium-molybdenum (Cr-Mo) alloy steel plate, specified for welded boilers and pressure vessels needing high-temperature strength and corrosion resistance, common in oil, gas, and power industries, offering good oxidation/corrosion resistance, especially in sour gas, with
Equivalents
| BS | EN | ASTM/ASME | DIN |
| 621 B | ––– | A387-11-1 | ––– |
Specifications for ASTM A387 Grade 11 Alloy Steel Plates
| Designation | Nominal Chromium Content (%) |
Nominal Molybdenum Content (%) |
| A387 Grade 11 | 1.25% | 0.50% |
Alloy Steel ASTM A387 GR 11 CL. 1 / 2 Plates Chemical Composition :
| C | Mn | P | S | Si | Cr | Mo |
| 0.04 - 0.17 | 0.35 - 0.73 | 0.035 | 0.035 | 0.44 - 0.86 | 0.94 - 1.56 | 0.40 - 0.7 |
Tensile Requirements for ASTM A387 Grade 11 Alloy Steel Plates Class 1 Plates
| Designation: | Requirement: | Grade 11 |
| A387 Grade 11 | Tensile strength, ksi [MPa] | 75 to 100 [515 to 690] |
| Yield strength, min, ksi [MPa]/(0.2% offset) | 43 [310] | |
| Elongation in 8 in. [200mm], min % | 18 | |
| Elongation in 2 in. [50mm], min, % | 22 | |
| Reduction of area, min % | ––– |
1 What is the maximum allowable stress value for ASME SA387 Grade11 Class1?
For ASME SA387 Grade 11 Class 1, the maximum allowable stress values are determined by ASME Section II, Part D (Table 1A), and vary significantly based on the operating temperature; for instance, at a typical temperature of $650^\circ\text{F}$ ($345^\circ\text{C}$), the allowable stress is approximately 13.8 ksi (95 MPa), but this value decreases as temperatures rise toward its upper limit of $1000^\circ\text{F}$ ($538^\circ\text{C}$) to account for reduced material strength and creep resistance.
2 What is the P number of ASME SA387 Grade 11 Class 1 steel?
The P-number for ASME SA387 Grade 11 Class 1 steel is 4. this assignment applies to both Class 1 and Class 2 of Grade 11, as they share the same nominal chemical composition of 1.25Cr-0.5Mo-Si.1 This grouping identifies the material as a low-alloy steel containing chromium and molybdenum, typically used for elevated temperature service in pressure vessels.2
3 What is the hardness of ASME SA387 Grade 11 Class 1 steel?
ASME SA387 Grade 11 Class 1 steel's hardness isn't directly listed in Brinell or Rockwell scales in typical spec sheets, but its yield strength is a key indicator, around 240 MPa (35 ksi), with tensile strength between 415-585 MPa (60-85 ksi), and it's usually supplied normalized and tempered, providing good strength for elevated temperature service in pressure vessels.
4 What temperature is ASME SA387 Grade 11 Class 1 steel?
In the lower end of the temperature range SA 387 Gr 11 (1150 °F min tempering temperature) , and SA 387 Gr 22 (1250 °F min tempering temperature) are used.3 These grades can be specified in either class 1 or 2 and can also be provided in the Normalized & Tempered or Quenched and Tempered.
5 Is ASME SA387 Grade 11 Class 1 carbon steel?
No,ASME SA387 Grade 11 Class 1 is not a carbon steel; it is a low-alloy chromium-molybdenum (Cr-Mo) steel. While it contains carbon (typically between 0.05% and 0.17%), it is specifically categorized as an alloy steel due to the intentional addition of chromium and molybdenum to enhance its performance in high-temperature and high-pressure environments.
6 What are the typical application fields of ASME SA387 Grade 11 Class 1 steel?
ASME SA387 Grade 11 Class 1 steel is primarily used in high-temperature, high-pressure applications, especially in the oil & gas, petrochemical, and power generation industries, for equipment like pressure vessels, boilers, heat exchangers, piping, and storage tanks, benefiting from its chromium-molybdenum content for enhanced strength, creep resistance, and resistance to oxidation and corrosion, particularly in sour gas environments.4
7 What is ASME SA387 Grade 11 Class 1 equivalent to?
ASME SA387 Grade 11 Class 1 is a chromium-molybdenum alloy steel primarily used for welded boilers and pressure vessels designed for elevated temperature service.5 It is virtually identical to ASTM A387 Grade 11 Class 1, with the primary difference being the governing regulatory code.





