Jan 28, 2026 Leave a message

What is the tensile strength of ASME SA515 Grade 70 ?

What is the tensile strength of ASME SA515 Grade 70 ?

The tensile strength of ASME SA515 Grade 70 carbon steel plate is 70–90 ksi (485–620 MPa). It is a pressure vessel quality steel designed for intermediate and higher-temperature service. This grade features a minimum yield strength of 38 ksi (260 MPa) and is commonly used in boiler and pressure vessel construction.

ASME SA515 Grade 70

ASME SA515 Grade 70 is a high-tensile carbon steel plate designed specifically for fabricators building heavy-duty steam equipment. As the strongest grade in the SA515 family, it is the "go-to" choice for boilers that operate at pressures and temperatures exceeding the capabilities of general-purpose steels. For fabricators, this material requires careful attention to thermal management; due to its higher carbon content, preheating before welding is often necessary to avoid hydrogen-induced cracking. Despite this, its excellent response to rolling and forming makes it a preferred material for large-scale cylindrical vessel shells that must maintain their circularity and strength under intense internal stress.

 

Key Characteristics

High Tensile Floor: A guaranteed minimum of 70,000 psi for safety in high-pressure designs.

Normalized Option: While often supplied as-rolled, it can be normalized for improved mechanical consistency.

Ease of Forming: Responds well to hot or cold rolling into complex vessel head shapes.

Surface Reliability: Typically features a clean, uniform surface finish suitable for high-quality weld preparation.

 

Grade Designation

Short Code: SA-515 Gr.70.

Material Class: Silicon-Killed Carbon Steel.

Standards Body: ASME (identical to ASTM A515 Gr 70).

 

Comparison with ASME SA285 Grade C

Tensile Strength: SA515 Gr 70 is much stronger (70–90 ksi) than SA285 Gr C (55–75 ksi).

Thickness Range: SA515 is available in very thick plates; SA285 is limited to a maximum of 2 inches.

Temperature Target: SA515 is for high temperatures; SA285 is for ambient/moderate service only.

info-779-249

Common Applications

Steam Boilers: High-pressure boiler drums and steam-generating shells.

Pressure Vessel Heads: Domed ends of high-temperature storage tanks.

Autoclaves: Pressurized chambers used for high-heat industrial processing.

 

What is the fatigue resistance of ASME SA515 Grade 70?
ASME SA515 Grade 70 has good fatigue resistance for most applications in pressure vessels and boilers, where it is subjected to cyclic loading. The material's tensile strength and good weldability help it resist fatigue failures in moderately high-stress conditions. However, for critical applications where fatigue resistance is a primary concern, higher-strength materials or special alloy steels may offer better performance and longevity under extreme cyclic loads.

What is ASME SA515 Grade 70?
ASME SA515 Grade 70 is a carbon steel material used for the manufacture of pressure vessels and boilers. It has a high tensile strength and good weldability, making it suitable for high-temperature and high-pressure environments. Commonly used in power plants and chemical processing, Grade 70 offers strength, toughness, and resistance to thermal and mechanical stresses, ensuring durability in critical applications.

What is the maximum temperature that ASME SA515 Grade 70 can withstand?
ASME SA515 Grade 70 can withstand temperatures up to 650°F (343°C) for continuous service. It is ideal for high-temperature applications where the material must maintain its mechanical properties under heat. However, prolonged exposure to temperatures

 

Chemical Composition

Element

SA 515 Gr 70

C (Carbon)

0.31

Mn (Manganese)

0.85-1.20

P (Phosphorus)

0.035

S (Sulfur)

0.035

Si (Silicon)

0.15-0.40

 

Mechanical Properties 

Property

SA 515 Gr 70

Yield Strength (min, ksi/MPa)

38 / 260

Tensile Strength (ksi/MPa)

70-90 / 485-620

Elongation (min, %)

17

Hardness (Brinell)

143-187

 

1What are the welding ability of ASME SA515 Grade 70?
ASME SA515 Grade 70 has good weldability, which makes it ideal for use in fabricating pressure vessels, heat exchangers, and boilers. Preheating may be necessary for thicker sections to prevent cracking, and post-weld heat treatment is often recommended to relieve residual stresses and improve mechanical properties. Low-hydrogen electrodes are usually used to minimize the risk of hydrogen-induced cracking during the welding process.

 

2What is the chemical composition of ASME SA515 Grade 70?
The chemical composition of ASME SA515 Grade 70 includes carbon (0.18–0.24%), manganese (0.60–1.00%), silicon (0.13–0.45%), sulfur (0.035% max), phosphorus (0.035% max), and trace amounts of chromium, nickel, and molybdenum. This combination of elements enhances the steel's strength, ductility, and resistance to oxidation, making it suitable for high-temperature applications, such as in boilers and pressure vessels.

 

3What is the tensile strength of ASME SA515 Grade 70?
ASME SA515 Grade 70 has a tensile strength range of 485–620 MPa and a yield strength of approximately 205 MPa. It also offers good elongation (around 20%) and impact resistance, which makes it suitable for high-pressure environments. These properties allow the steel to perform reliably in applications where mechanical stress and high temperatures are present, such as in pressure vessels, heat exchangers, and boilers.

 

4What is the cost of ASME SA515 Grade 70?
The cost of ASME SA515 Grade 70 is typically higher than standard carbon steels due to its alloy content and high-strength properties. However, the added cost is justified by the material's performance in demanding applications, such as pressure vessels and heat exchangers. Its ability to withstand high temperatures and pressures makes it a cost-effective choice in industries like power generation and petrochemicals, where safety and durability are critical.

 

5What are the impact resistance of ASME SA515 Grade 70?
ASME SA515 Grade 70 exhibits good impact resistance, making it suitable for applications where both high pressure and temperature are present. The material maintains toughness at elevated temperatures, which helps prevent brittle fracture. However, for extremely low-temperature applications, materials with improved low-temperature toughness, such as SA537, may be more suitable, as SA515 Grade 70 is not designed for cryogenic conditions.

 

6What are the thickness limitations of ASME SA515 Grade 70?
ASME SA515 Grade 70 is available in thicknesses ranging from 3/16 inch (4.8 mm) to 1 1/2 inches (38 mm) for pressure vessel applications. The material is often used in thinner sections where high tensile strength and good weldability are required. For thicker plates, additional considerations for heat treatment and welding processes are necessary to ensure the material performs effectively under high stress and temperature.

 

7What are the mechanical properties of ASME SA515 Grade 70?
ASME SA515 Grade 70 has a tensile strength range of 485–620 MPa and a yield strength of approximately 205 MPa. It also offers good elongation (around 20%) and impact resistance, which makes it suitable for high-pressure environments. These properties allow the steel to perform reliably in applications where mechanical stress and high temperatures are present, such as in pressure vessels, heat exchangers, and boilers.

 

 

Contact now

Get an valued quotation for ASME SA515 Grade 70 , Contact GNEE Steel

info-624-470

Send Inquiry

whatsapp

phone

Email

Inquiry