Jul 11, 2025 Leave a message

S355J2-N-MTC-steel-plate.pdf

S355J2+N Material Grade: Properties and Applications

What Material Grade Is S355J2+N

S355J2+N is a non-alloy structural steel grade specified in EN 10025-2, widely used in the construction and engineering industries. In the designation, "S" stands for structural steel, "355" is the minimum yield strength of 355 MPa, "J2" requires a minimum Charpy V-notch impact energy of 27 J at −20°C, and "+N" indicates that the material is delivered in the normalized condition. The normalized delivery state refines the grain structure and provides consistent mechanical properties through the plate thickness.

Mechanical Properties

S355J2+N steel plate has a minimum yield strength of 355 MPa and a tensile strength of 470–630 MPa. The grade retains its strength and toughness at low temperatures down to −20°C, thanks to the J2 impact requirement. Typical hardness lies between 150 and 190 HB for plates with a thickness of 16 mm or less, and plates are commonly available up to 120 mm in thickness.

Delivery Condition: The +N Suffix

The +N suffix is an important part of the designation. It means the plate is supplied in the normalized condition, which improves toughness and ensures a uniform fine-grained microstructure. This makes S355J2+N suitable for welded structures and for applications where the as-rolled condition would not provide sufficient impact performance at low temperature.

Physical Properties

The density of S355J2+N is 7850 kg/m³, which is the standard density of structural steel. The combination of 355 MPa minimum yield strength, a tensile strength of 470–630 MPa, and −20°C impact toughness makes the grade a dependable choice for load-bearing structures that must perform reliably in cold environments.

Typical Applications

S355J2+N is used in heavy machinery, construction equipment, bridges, building structures, and general engineering applications where high strength and low-temperature toughness are required. The normalized delivery condition also makes it a common choice for welded assemblies where consistent through-thickness properties are important.

Frequently Asked Questions

What material grade is S355J2+N?
S355J2+N is a structural steel grade per EN 10025-2 with a minimum yield strength of 355 MPa, a tensile strength of 470–630 MPa, and a minimum Charpy impact energy of 27 J at −20°C, delivered in the normalized condition.

What is the difference between S355J2+N and S355J2?
S355J2 describes the steel grade and toughness level, while the +N suffix specifies the normalized delivery condition, which provides improved and more uniform mechanical properties compared with the as-rolled condition.

What is the density of S355J2+N?
The density is 7850 kg/m³.

What is the temperature resistance of S355J2+N?
The grade retains its strength and toughness at low temperatures down to −20°C, meeting the J2 Charpy impact requirement of 27 J at −20°C.

What is the hardness of S355J2+N?
Hardness typically ranges between 150 and 190 HB for plates up to 16 mm thick.

Where is S355J2+N used?
It is used in heavy machinery, construction equipment, bridges, and general engineering structures where strength, weldability, and low-temperature toughness are required.

Send Inquiry

whatsapp

phone

Email

Inquiry