GNEE steel, a leading manufacturer and exporter of structural steel plates, supplies premium EN 10025-2 S355JR steel plates for construction, bridges, and heavy machinery applications. S355JR EN 10025-2 is a non-alloy structural steel material offering high strength and good weldability for load-bearing structures. This article provides a comprehensive overview of what material S355JR EN 10025-2 is, including its designation, chemical composition, mechanical properties, and applications, helping engineers and fabricators understand its suitability.
material s355jr en 10025-2 Overview of S355JR EN 10025-2
S355JR is a grade from EN 10025-2, the European standard for hot-rolled structural steels. It is a non-alloy steel with high yield strength for general use. GNEE steel offers S355JR with options like EN 10025-2 S355JR+N, ensuring compliance for global projects.
material s355jr en 10025-2 Designation Breakdown
The designation "S355JR" means:
S: Structural steel.
355: Min yield strength 355 MPa.
JR: Impact 27 J at +20°C.
It is used for welded structures in standard conditions.
material s355jr en 10025-2 Chemical Composition
The chemical composition of material s355jr en 10025-2 is optimized for strength and weldability. The table below shows limits (% by weight, max values):
|
Element |
Composition |
|---|---|
|
C |
0.24 |
|
Mn |
1.60 |
|
P |
0.035 |
|
S |
0.035 |
|
Si |
0.55 |
|
Cu |
0.55 |
|
N |
0.012 |
Key Notes on Chemical Composition:
Low C for weldability.
Mn for strength.
GNEE steel's plates meet EN 10025-2.
material s355jr en 10025-2 Mechanical Properties
Material s355jr en 10025-2 has high strength. The table below shows properties for plates up to 16 mm:
|
Property |
Value |
|---|---|
|
Yield (min) |
355 MPa |
|
Tensile |
470–630 MPa |
|
Elongation (min) |
20% |
|
Impact (J at °C) |
27 at +20°C |
|
Hardness (HB) |
150–200 |
Key Notes on Mechanical Properties:
High yield for loads.
Good ductility for forming.
For cold, check EN 10025-2 S355J2 steel.
material s355jr en 10025-2 Applications and Use
Material s355jr en 10025-2 is used in construction (bridges), offshore (platforms), and machinery (cranes), leveraging high strength for weight savings.
Why Choose GNEE steel for S355JR EN 10025-2?
GNEE steel is a trusted supplier of S355JR EN 10025-2, offering:
Certified Quality: Plates undergo ultrasonic testing and chemical analysis to meet EN standards.
Customization: Available in thicknesses from 6–300 mm, with options for normalization.
Global Supply: Competitive pricing and reliable delivery worldwide.
Technical Support: Guidance on grades like EN 10025-2 S355K2 steel or EN 10025-2 S235J2 steel.
GNEE steel Solution
S355JR EN 10025-2 is a non-alloy structural steel with 355 MPa yield, 470–630 MPa tensile, and 27 J impact at +20°C, ideal for construction. GNEE steel's high-quality plates ensure compliance for your projects.
GNEE Steel also supplies a variety of high-strength steel plates, such as A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E, etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to info@gneesteels.com. You are welcome to consult us, and we are very willing to answer your questions.
FAQ
What is S355JR equivalent to?
S355JR equivalent grades have very close chemical composition and mechanical properties to that of S355JR steel. Both the S355JR equivalent grades Q345B, A572 Gr 50, ST52-3, SM490B and S355JR steel are main products of BBN steel.
What is structural steel grade S355JR?
S355JR steel has a high strength-to-weight ratio, making it suitable for use in load-bearing structures such as bridges, buildings, and offshore structures. It has a minimum yield strength of 355 N/mm², making it one of the strongest steel grades available.
What is the difference between S355JR and J2?
In S355JR and S355J2 steel, JR and J2 indicates the steel needs to do +20℃ impact test and -20℃ impact test respectively. The different impact temperature is the main difference between S355JR and S355J2 steel. S355J2 steel can better adapt to low temperature work condition than S355JR steel.
What does JR mean in steel?
The J means that the test was conducted with 27 joules of energy. This is followed by either an R for room temperature, or a number referring to the temperature the tests were conducted at. So JR is room temperature (plus 20 degrees) J0 is 0 degrees and J2 is -20 degrees.
Is S355 better than S275?
This grade of steel is stronger than its S275 counterpart with a minimum yield strength of 355 N/mm2 resulting in its S355 name. This grade is also available in plate, round bar, flat bar, and is even available in blocks.
What is the hardness of S355 jr?
Grade S355JR has a minimum yield strength of 355 MPa. The impact energy at a room temperature of 20°C is at least 27 joules.
What is S355 steel used for?
This structural steel is used in shipbuilding and railway vehicle construction. S355 steel also finds optimal application for the construction of machinery such as cranes and excavators, as well as in building and piping construction, ventilation systems and pumps.
What is the price of S355JR per kg?
Mild Steel, Grade: S355JR – 0.61 USD/kg | 610 USD/ton
What is the difference between S275JR and S355JR?
S275JR is carbon steel, while S355JR is low alloy steel. Both carbon steel S275JR and S355JR low alloy steel are under EN10025-2 standard. The S355JR low alloy steel is higher steel grade than carbon steel S275JR.
| Other steel plate | ||||
| Name | Material | Specification (mm) | Tons | Remark |
| Clad steel plate | P265GH+410,S355JR+410,A516Gr70+316, A537CL1+304L,Q235B+304L,Q345B+304, A516Gr70(NACE)+410,A537CL1+904L, A537CL1+316L,A516Gr70+304L,A537CL1+304 ,A516Gr70+410,A516Gr70+904L |
2-300mm(Based plate),1-50mm(Composited plate) | / | UT, AR, TMCP.Normalized, Quenched and Tempered,Z Direction Test, Charpy V-Notch impact TestThe Third Party Test , Coated or Shot Blasting and Painting. |
| Low Alloy | Q345A, Q345B, Q345C, Q345D, Q345E, Q390, Q420, Q460C, ST52-3, S355J2+N, SS400, SA302GrC, S275NL, 35CrMo | 6 - 350 | 5788.56 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| Pressure Vessel Plate | Q245R, Q345R, Q370R, 16MnDR, 09MnNiDR, 15CrMoR, 14Cr1MoR, 12Cr2Mo1R, SA516Gr60, SA516Gr70, SA516Gr485, SA285, SA387Gr11, SA387Gr12, SA387Gr22, P265,P295,P355GH,Q245R(R-HIC),Q345R(R-HIC) | 3 - 300 | 8650 | Normalizing, tempered ,controlled rolling, hot rolling , Hot rolling,1st inspection, 2nd inspection, 3rd inspection |
| High-Strength Plate | WH785D/E,Q960D/E, Q890D/E,WH60D/E,WH70B,Q550D,Q590D,Q690D/E | 8 - 120 | 3086.352 | Quenched and tempered |
| Wear-Resistant Plate | NM360, NM400, NM450, NM500 | 6 - 150 | 3866.297 | Quenched and tempered |
| Bridge Plate | Q235qC, Q345qC, Q370qC, Q420qC, Q345qDNH, Q370qDNH, A709 - 50F - 2, A709 - 50T - 2 | 8 - 200 | 2853.621 | Hot rolling, normalized ,hot rolling controlled rolling, quenched and tempered + toughness and brittleness |
